In Reply to: RE: Start of winding, Triad C-40X Chokes posted by drlowmu on June 23, 2016 at 12:10:26:
This 1.5hy choke at 40 ohms reads 1.316hyThis 500mh choke at 30 ohms is reading 396mhThis 500mh at 30 ohms and it reads 401mhThis 320mh at 10 ohms is reading 368mh
" This 320mh at 10 ohms is reading 367mh
These chokes all work well in the applications I have used them,especially the 10 to 30 ohm low mu chokes..There is a problem with consistent stated readings however,if the chokes were checked and rated with voltage applied,that can cause a variation in readings..I am impressed that the 320mh that Jeff recommended specs well because they do a phenomenal job in the Mac Mc30s.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
Edits: 06/24/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Here are the readings of chokes I got on my LC-102 - Michael Samra 00:52:47 06/24/16 (6)
- RE: Here are the readings of chokes I got on my LC-102 - Lew 09:26:33 06/24/16 (5)
- RE: Here are the readings of chokes I got on my LC-102 - Michael Samra 10:11:34 06/24/16 (4)
- RE: Here are the readings of chokes I got on my LC-102 - Lew 11:10:38 06/24/16 (3)
- Here is what I did. - Michael Samra 14:14:24 06/24/16 (0)
- RE: Here are the readings of chokes I got on my LC-102 - Michael Samra 13:00:18 06/24/16 (1)
- DC Current Needed - Triode_Kingdom 18:54:34 06/24/16 (0)