|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Another thing to consider.... posted by DAK on June 23, 2016 at 17:19:41:
Dak
Answer a question.Were you planning on using one triode in each 6SN7 for voltage gain while the using the 2nd half as a follower?.If you CCS load one section of the 6SN7,you will get a gain of 20.I'd run it at about 8ma to 10ma.
I know you only want to get 12 watts but you still want it to be very linear and as far as operating points go,that is more affected by the DC voltage settings than the AC signal. Do you have a schematic to that circuit?
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Another thing to consider.... - Michael Samra 20:22:28 06/23/16 (3)
- RE: Another thing to consider.... - DAK 20:34:58 06/23/16 (2)
- I don't see any circuit with a PP output stage in the link you provided. - Michael Samra 21:05:30 06/23/16 (1)
- RE: I don't see any circuit with a PP output stage in the link you provided. - DAK 00:08:47 06/24/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
