In Reply to: RE: Fuse Holder posted by Steve O on June 6, 2016 at 06:04:08:
With the fuse in tact, both of the tags are going to be hot regardless. If the fuse blows one is hot, then you unplug it. If touch safety is a concern, both should be heat-shrinked. However, you are talking about an environment where there is exposed voltage everywhere so that is kind of like wearing a 1 inch square bulletproof vest.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Fuse Holder - Chip647 07:24:10 06/06/16 (13)
- RE: Fuse Holder - gusser 09:00:43 06/06/16 (12)
- Good point - Chip647 14:33:49 06/06/16 (11)
- Better point - twystd 22:31:18 06/07/16 (10)
- Fuse First - PakProtector 10:22:41 06/10/16 (0)
- FWIW... how I wire old Fender amps - FenderLover 01:01:16 06/08/16 (8)
- Correct conversion - Chip647 05:44:25 06/08/16 (7)
- RE: Correct conversion - Triode_Kingdom 08:16:53 06/08/16 (6)
- RE: Correct conversion - twystd 10:39:22 06/08/16 (5)
- RE: Correct conversion - Triode_Kingdom 11:00:35 06/08/16 (4)
- RE: TK is right and it is important - Russ57 15:52:16 06/08/16 (3)
- Yes, but... - Chip647 16:44:23 06/08/16 (2)
- No, you're wrong - Triode_Kingdom 17:12:57 06/08/16 (0)
- RE: Yes, but... - FenderLover 17:04:45 06/08/16 (0)