Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Now this is ineresting ........

I have been so involved with the hum pots on the deuce 26/45 that I forgot that the 26 preamp has the 10 turn pots in it and they are working just fine for hum cancelation. I am beginning to think I won't be able to really nail this down until I build the final version with no clips leads laying around and proper lead dress for everything. I will have parts for both the single turn and the 10 turn on hand by that time so I will try each and report back at that time.
I also took a good look at the back of the 10 turn pots I got from china and they say quite clearly "bourns" and "Mexico", so apparently they were not made in china afterall. See attached liink for more info on these. More study is required methinks, as these can be had at various places around the net for good prices. I really need to figure out why they are working on the preamp but not the amp.


This post is made possible by the generous support of people like you and our sponsors:
  VH Audio  


Follow Ups Full Thread
Follow Ups
  • Now this is ineresting ........ - vinnie2 14:28:51 01/27/16 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.