In Reply to: Back to the 26/26/45 amp...... posted by vinnie2 on January 19, 2016 at 12:12:34:
I'm building a 4P1L SE amp for a friend - almost the same bias point, 36mA at 250v but in this case it's filament bias. He's giving me a 125FSE to try out. Input section is 4P1L with Hammond 126B as plate choke and Teflon 0.1 FT-3 coupling cap. Very similar to my home amp which has a Lundahl LL1682 as OPT. 5K into 5 ohms. You might consider that as an upgrade - perfect for a 45. Or the LL1663, 5K into 8 ohms.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Hammond 125ESE - andy evans 12:50:10 01/19/16 (5)
- RE: Hammond 125ESE - vinnie2 13:24:59 01/19/16 (4)
- RE: Hammond 125ESE - Eli Duttman 13:36:20 01/19/16 (3)
- RE: Hammond 125ESE - vinnie2 13:46:12 01/19/16 (2)
- RE: Hammond 125ESE - Eli Duttman 05:42:42 01/20/16 (1)
- RE: Hammond 125ESE - vinnie2 09:26:10 01/20/16 (0)