|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: What to do with 490V??? posted by hifipaul on November 22, 2015 at 08:28:16:
Hello,
Are those interstage transformers in the back (2 square white items)? If so, you might want to look at Shishido SET options. Yields a straight through signal path (no caps) leveraging the interstage transformers. Lots of schematics here -
http://www.single-ended.com/Lagarto/shishido/shishido-skema.htm
No expert on these things, but if your transformer is yielding 490 v straight out, then the voltage doubler stages shown in the schematics might put you in the range of driving a transmitter triode. That would yield you a well powered SET amp - well worth having.
Regards -- Roger
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: What to do with 490V??? - rogerh113 10:33:35 11/22/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]