|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Started my winter project posted by Palustris on November 14, 2015 at 12:35:09:
I sent them the Cadd file and every hole and vent was cut by a machine. They will even do engraving, I chose to go the laser engraving route though. Did I mention the chassis is rock solid and holds 100+ lbs of iron very well.
The chassis came out better than expected and the guys at Landfall know a little about tube amps so the feedback was very helpful. They also have the countersink tool for the CNC which really cleans things up. Autocadd is very easy to use for making lines, circles, arc's, etc. Well worth the effort not fighting with drifting holes trying to hand drill everything.
I many templates for the transformers so if anyone is interested I'll send you the cadd template.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: They have a CNC now!! - deafbykhorns 13:11:37 11/14/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
