In Reply to: 27 preamp posted by vinnie2 on August 2, 2015 at 13:47:46:
Did you charge the NiMH cells before installation? Expect 1.2 V. per cell.
The net load presented to the #27 is the parallel combination of the 22 Kohm part, the 470 Kohm part, and the I/P impedance of the power amp. The RP of a #27 is around 10 Kohms. The net load should be at least 3X RP and, obviously, you don't get that "tall".
To put things in perspective, the RP of a 12B4 is around 1000 Ω. That tube has no problem driving downstream stuff even as difficult as the IHF "standard" 10 Kohms.
Eli D.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: 27 preamp - Eli Duttman 14:45:36 08/02/15 (3)
- RE: Plots and distortion - deafbykhorns 18:05:01 08/02/15 (0)
- RE: 27 preamp - Paul Joppa 15:16:55 08/02/15 (1)
- RE: 27 preamp - Eli Duttman 15:28:50 08/02/15 (0)