|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: 211 optimum bias point... posted by Triode_Kingdom on July 30, 2015 at 12:22:46:
But he asked several questions -
....lowest distortion bias
SO .06V for max class A operation
10 Watts (36 Watts Peak into A2)
....probable best with low distortion and good power
HERE .07V for Class A2 operation and "68% sweet spot"
30 Watts
....ok distortion but higher power
THEN .1V for max power and low 211 life
40 Watts
DanL
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: 211 optimum bias point... - danlaudionut 13:01:02 07/30/15 (1)
- I made measurements - Triode_Kingdom 07:25:17 07/31/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
