I built this but am having an oscillation problem. Here is a link to the schematic. http://www.southampton.ac.uk/~apm3/diyaudio/Croft5_circuit.jpg
I am not sure if this schematic is from the factory or a copy so I am wondering if there are any errors. I am pretty sure my build is correct as I have gone over it many times and have not found anything obvious. Thanx for the help. best regards, Dak
This post is made possible by the generous support of people like you and our sponsors:
Topic - Anything wrong with this schematic? - DAK 23:31:59 07/06/15 (25)
- RE: The schematic is correct! Amp working now. - DAK 17:23:12 07/08/15 (1)
- I'm very glad you got that straightened out. (nt) - Tre' 17:33:29 07/08/15 (0)
- RE: Did some further testing - DAK 16:09:50 07/07/15 (12)
- RE: Did some further testing - SETguy 04:10:22 07/08/15 (3)
- RE: Why? - Russ57 16:28:07 07/08/15 (2)
- Try again - Tre' 16:41:53 07/07/15 (7)
- RE: I might suggest - Russ57 16:32:33 07/08/15 (0)
- RE: Try again - DAK 17:08:25 07/07/15 (4)
- RE: Try again - Tre' 18:35:13 07/07/15 (3)
- RE: Try again - DAK 19:57:45 07/07/15 (2)
- RE: Try again - Tre' 21:29:44 07/07/15 (1)
- RE: I will retest. and let you know, nt. - DAK 01:53:33 07/08/15 (0)
- RE: Try again - DAK 16:51:23 07/07/15 (0)
- RE: Anything wrong with this schematic? - twystd 12:41:04 07/07/15 (0)
- RE: Anything wrong with this schematic? - SETguy 04:45:15 07/07/15 (4)
- RE: Anything wrong with this schematic? - Triode_Kingdom 08:10:37 07/07/15 (3)
- RE: Anything wrong with this schematic? - DAK 09:31:48 07/07/15 (2)
- RE: Anything wrong with this schematic? - SETguy 13:57:09 07/07/15 (1)
- RE: Anything wrong with this schematic? - DAK 15:55:47 07/07/15 (0)
- RE: Anything wrong with this schematic? - Chip647 04:32:14 07/07/15 (3)
- RE: Anything wrong with this schematic? - DAK 09:36:25 07/07/15 (1)
- Yes (nt) - Chip647 12:36:55 07/07/15 (0)
- RE: thank you, i will try that. nt. - DAK 09:33:38 07/07/15 (0)