In Reply to: Low ESR Electrolytics posted by Triode_Kingdom on June 21, 2015 at 14:55:35:
The data sheet gives tan delta, which is ESR divided by capacitive reactance.
For the 250v/220uF cap, tan delta is 0.15, and reactance at 120Hz is 6 ohms, so ESR must be 0.9 ohms.
You're welcome :^)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Low ESR Electrolytics - Paul Joppa 13:42:28 06/22/15 (2)
- Thanks Paul! - Triode_Kingdom 16:08:43 06/22/15 (1)
- Discontinuation "Blues" - Eli Duttman 17:27:03 06/22/15 (0)