|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Making Circuit Boards posted by adam@denderapartners.com on June 21, 2015 at 18:21:42:
This YouTube video is what got me thinking about the brad point bit. He uses a bit with a single cutter. Have you tried it this way? Incidentally, regarding the amount of work, I have a small CNC mill that could be programmed for the location and depth of each cut. It would be a pretty easy operation. Maybe there are other issues I'm not aware of.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Here's a Guy Doing Something Similar - Triode_Kingdom 08:03:03 06/22/15 (5)
- RE: Here's a Guy Doing Something Similar - LinuxGuru 08:59:13 06/22/15 (4)
- RE: Here's a Guy Doing Something Similar - Triode_Kingdom 09:21:27 06/22/15 (2)
- RE: Here's a Guy Doing Something Similar - dave slagle 12:52:14 06/22/15 (0)
- RE: Here's a Guy Doing Something Similar - LinuxGuru 10:01:44 06/22/15 (0)
- RE: Here's a Guy Doing Something Similar - LinuxGuru 09:03:41 06/22/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
