RE: It was designed

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Follow Ups Full Thread

Topic - New PAS 2 Phono board low volume - Dingojazz 14:25:49 06/06/15 (19)

Culprit named - Dingojazz 21:10:06 06/07/15 (0)

What tubes was that board designed for? Use those tubes. - Chip647 13:55:34 06/07/15 (6)

It was designed - Dingojazz 13:01:04 06/08/15 (5)

"PAS using 12AY7s" - Tre' 08:45:09 06/11/15 (3)

Example of "PAS using 12AY7s" - johnmil 06:15:13 06/12/15 (2)

RE: Example of "PAS using 12AY7s" - Paul Joppa 23:53:27 06/12/15 (0)

OK, I see. It's not a PC6...Thanks - Tre' 07:37:17 06/12/15 (0)

RE: It was designed - tubular.well 05:57:58 06/11/15 (0)

12AY7 =gain of 40, 12AX7=gain of 100 - mobiasloop 10:16:43 06/07/15 (4)

RE: 12AY7 =gain of 40, 12AX7=gain of 100 - Dingojazz 10:25:29 06/07/15 (3)

RE: 12AY7 =gain of 40, 12AX7=gain of 100 - Tre' 14:38:09 06/07/15 (0)

RE: 12AY7 =gain of 40, 12AX7=gain of 100 - mobiasloop 10:38:30 06/07/15 (1)

RE: 12AY7 =gain of 40, 12AX7=gain of 100 - Lew 10:05:20 06/08/15 (0)

It appears that - Dingojazz 09:54:54 06/07/15 (0)

Allright - Dingojazz 06:59:54 06/07/15 (0)

RE: New PAS 2 Phono board low volume - drlowmu 06:45:51 06/07/15 (0)

RE: New PAS 2 Phono board low volume - DAK 21:47:53 06/06/15 (0)

RE: New PAS 2 Phono board low volume - xaudiomanx 16:22:48 06/06/15 (1)

RE: New PAS 2 Phono board low volume - FenderLover 19:27:15 06/06/15 (0)

Follow Ups

RE: It was designed - tubular.well 05:57:58 06/11/15 (0)

Post a Message!