|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: PING to Audio Note Kit One owners posted by hennfarm on May 7, 2015 at 14:33:21:
Hello Hennfarm,
the motorboating noise only was perceptible when I played music with very low frequencies. I put some rubber stripes bellow the transformers, between them and the chassis, but yes, maybe the problem still is there....and what I'm done was only absorb that vibrations..But one thing to clarify, when I done this, the voltage was right. The higher voltage problem begins with the short circuit I made accidentally when I was moving a wire to reduce a hum, just before to conclude the repairing work. The whole story is that I was using a new pair of glasses , with a progressive dioptric correction (I had never used before that kind), so for a second I went "blind" when I was accommodating those wires, then I touched "something" on the filament board with a screw driver ( What can I say, I'm getting older).
I will take a look to this oscillation probability as soon I can reduce the short circuit.
Best regards,
Beto
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: PING to Audio Note Kit One owners - beto1 06:32:56 05/08/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
