I have a ground loop hum that I have isolated to an active crossover used for my tapped horn subs. The hum is just loud enough to be annoying. I can attentuate by connecting a clip lead from the chassis ground of the active crossover to the chassis ground of the monoblock amps. I'm looking for assistance for what else I could do that would not require this separate wire. All of my powered equipment uses 3 prong plugs and are plugged into the same circuit. The ground loop appears to be traveling back through the ICs from the active crossover to the TVC to the amps. I know the noise is not filament hum.
A simple schematic of my system is attached.
TIA,
Jim
This post is made possible by the generous support of people like you and our sponsors:
Topic - Help with ground loop hum - Jim D. 10:10:09 04/22/15 (3)
- RE: Help with ground loop hum - 6bq5 10:57:09 04/22/15 (2)
- RE: Help with ground loop hum - Jim D. 06:41:32 04/24/15 (1)
- RE: Help with ground loop hum - 6bq5 10:28:35 04/24/15 (0)