In Reply to: Ok, you prolly already check these. posted by FenderLover on December 9, 2014 at 23:16:42:
Secondary is grounded to a separate ground along with the input jack grounds.
The driver tube B+ is obtained from the mains B+ and dropped via 105k resistor with 50uf of capacitance.
Cathode resistors, 1w mf were checked before installation and are grounded to a 12awg bus bar which is grounded to a power transformer mounting bolt.
It seems like I may have wired the driver tube socket incorrectly but I have checked the arrangement 3 times and do not see anything wrong. regards, Dak
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Ok, you prolly already check these. - DAK 01:27:33 12/10/14 (0)