In Reply to: puzzled part deux posted by vinnie2 on November 24, 2014 at 05:41:57:
If your 6SL7 has 300v on the plate, and the B+ is 300v, it means the 6SL7 isn't drawing any current. Check for correct cathod voltate on the 6SL7 and trace to problem from there. I'm guessing plate should be at 200v (100k at 1ma aprox) drop from 300v B+.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: puzzled part deux - SteveBrown 08:21:36 11/24/14 (0)