Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]

---

[ Alert Moderator ]

---

RE: Regulation for dynaco st-35

Posted by altecboy (A) on November 18, 2014 at 13:12:34

In Reply to: RE: Regulation for dynaco st-35 posted by altecboy on November 10, 2014 at 00:49:58:

So I decided to go ahead and try it. I got one of Pete Millett's Maida style floating regulator pc boards. I inserted this before the B+ takeoff which powers the 12dw7 drivers. The input to the regulator was around 350 VDC. It's output is 330 VDC.

In my system this turned out to be a worthwhile improvement. More space between the voices. Better depth. I like it.

Used with Bill Gillespie's EFB mod, this is a nice sounding amplifier.

One more thing: I placed a Solen poly 40 uF cap directly after the rectifiers and in front of a choke. This too improved the performance.

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---