In Reply to: Is this regulated filament supply any good? posted by Nickel Core on October 25, 2014 at 01:28:16:
To function correctly, the regulator must not be referenced to ground. Float the entire regulator so that it presents a high Z path to ground at the highest frequencies of interest, and the problem being discussed here will not exist.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- No - Triode_Kingdom 06:58:52 10/26/14 (17)
- So... - Nickel Core 07:04:30 10/26/14 (16)
- RE: So... - Triode_Kingdom 10:42:26 10/26/14 (15)
- RE: So... - Nickel Core 11:28:36 10/26/14 (14)
- RE: So... - Alex Kitic 13:54:17 10/26/14 (13)
- Alex... - Triode_Kingdom 18:23:28 10/26/14 (12)
- RE: Alex... - Alex Kitic 22:31:13 10/26/14 (11)
- RE: Alex... - Lew 10:02:57 10/27/14 (0)
- RE: Alex... - Alex Kitic 03:46:46 10/27/14 (9)
- RE: Alex... - Triode_Kingdom 08:53:24 10/27/14 (8)
- RE: Alex... - Alex Kitic 11:42:41 10/27/14 (7)
- RE: Alex... - Al Noakes 12:50:27 10/27/14 (6)
- RE: Alex... - Alex Kitic 13:07:58 10/27/14 (5)
- RE: Alex... - Al Noakes 14:25:07 10/27/14 (4)
- RE: Alex... - Alex Kitic 22:23:27 10/27/14 (2)
- RE: Alex... - Triode_Kingdom 07:29:20 10/28/14 (1)
- RE: Alex... - Alex Kitic 14:18:43 10/28/14 (0)
- 10A Transformer - Triode_Kingdom 20:28:08 10/27/14 (0)