In Reply to: RE: IXYS 10M45 High Voltage CCS SPICE? posted by jorisdallaire on October 25, 2014 at 19:14:35:
I can make it to work this way:
Use the nmos symbol, go to advanced setting, set the "prefix" parameter to "X" and the "spicemodel" parameter to "10M45S" (without quotes). Of course the model goes into and .inc directive or in a included file.Results are different than for the 10M90S - The 10M45 model gives way too high current when Rset is lower than about 200 ohms, so I'd use the 10M90 model. FWIW my 10M90 sims corresponded to measurements made on an actual circuit that was using the 10M45S.
Edits: 10/25/14 10/25/14
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Got it to work. - jorisdallaire 19:35:07 10/25/14 (2)
- RE: Got it to work. - jazbo8 21:31:32 10/25/14 (1)
- Thanks Guys! - Triode_Kingdom 06:49:36 10/26/14 (0)