I was wondering what is the procedure to determine the value of the current setting resistor for the LM317. I have used it on a RH84 ver.2 amp and it seems to improve the Low frequency response. So, I would like to try it on some other tubes, specifically the 7591. TIA, DAK
This post is made possible by the generous support of people like you and our sponsors:
Topic - LM317 as a CCS , how to? - DAK 19:31:04 10/23/14 (22)
- RE: LM317 as a CCS , how to? - Chip647 19:51:05 10/23/14 (21)
- RE: LM317 as a CCS , how to? - DAK 23:34:07 10/23/14 (12)
- RE: LM317 as a CCS , how to? - Alex Kitic 07:00:36 10/24/14 (11)
- RE: LM317 as a CCS , how to? - DAK 09:41:09 10/24/14 (10)
- RE: LM317 as a CCS , how to? - Alex Kitic 12:48:48 10/24/14 (9)
- RE: LM317 as a CCS , how to? - DAK 13:25:55 10/24/14 (8)
- Zener Noise - Triode_Kingdom 15:56:24 10/25/14 (0)
- RE: LM317 as a CCS , how to? - Alex Kitic 23:20:40 10/24/14 (6)
- RE: LM317 as a CCS , how to? - Triode_Kingdom 16:01:40 10/25/14 (4)
- RE: LM317 as a CCS , how to? - Alex Kitic 00:04:20 10/26/14 (3)
- The Cap is not Superflous - Triode_Kingdom 11:48:18 10/27/14 (2)
- RE: The Cap is not Superflous - Alex Kitic 12:11:46 10/27/14 (1)
- RE: The Cap is not Superflous - Triode_Kingdom 13:25:22 10/27/14 (0)
- RE: LM317 as a CCS , how to? - DAK 13:53:10 10/25/14 (0)
- RE: LM317 as a CCS , how to? - DAK 20:31:18 10/23/14 (7)
- RE: LM317 as a CCS , how to? - Chip647 05:00:57 10/24/14 (6)
- RE: LM317 as a CCS , how to? - DAK 13:16:07 10/25/14 (5)
- RE: LM317 as a CCS , how to? - Alex Kitic 01:28:54 10/26/14 (4)
- Using a 6SL7 instead of 12AT7 in a RH amp - DAK 11:10:31 10/26/14 (3)
- RE: Using a 6SL7 instead of 12AT7 in a RH amp - Alex Kitic 13:34:36 10/26/14 (2)
- RE: Using a 6SL7 instead of 12AT7 in a RH amp - DAK 14:13:37 10/26/14 (1)
- RE: Using a 6SL7 instead of 12AT7 in a RH amp - Alex Kitic 04:26:40 10/27/14 (0)