|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Measurements posted by Triode_Kingdom on October 18, 2014 at 14:24:31:
6ah4
185 volts plate to cathode volts at idle.
30ma. idle current.
-15 volts grid bias.
5K load impedance.
A 30 volt peak to peak input signal yields .88 watts RMS power with a plate voltage change of -109 volts to +85 volts.
I know someone can tell me what % of harmonic distortion that is.
A 20 volt peak to peak input signal yields .42 watts RMS power with a plate voltage change of -70 volts to +60 volts.
I know someone can tell me what % of harmonic distortion that is.
A chain is only as strong as it's weakest link.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
Edits: 10/20/14 10/20/14
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Measurements - Tre' 21:20:28 10/20/14 (2)
- RE: Measurements - Triode_Kingdom 21:48:47 10/20/14 (1)
- RE: Measurements - Tre' 22:45:06 10/20/14 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
