Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]
[ Alert Moderator ]

RE: The Monster Amp




Here's the hole template for the ETI MW22B-10 precision 10 turn wirewounds. This template also has a key hole on the top that's for Litton 10-turn dial counter knobs, but may work with others. At any rate, you can delete the top-side keyhole if you want, it's only for the dial counter.

This arrangement works well in 4mm plate. Like the octal socket hole, this is a multi-diameter hole with a key. The pot countersinks from the back, goes in far enough to get the key in the hole, but allows the strain of the nut to be placed on the shoulder of the brass shaft collar, rather than on the plastic, which might break it. All in all, this hole came out perfect and needs no revisions at all for 4mm plate.

https://www.dropbox.com/s/mpgiiafr2ab1rgh/2014-10-14%2000.54.00.jpg?dl=0


This post is made possible by the generous support of people like you and our sponsors:
  Amplified Parts  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]