|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Are my ITs ok for this schematic? posted by DAK on August 21, 2014 at 10:35:44:
inductive load for 6SL7 is floored by design.so, you don't know if they're EP trannies, and you don't what plate current they're gapped for.. ?
hmm.
1:1 ratio with 1k5 (which doesn't mean much).. but with your measured <80H inductance.. 1k5 drive impedance seems about right. 5687 as the other guy said, or if you need more gain triode connected pentode, 7788, d3A etc.
But not 6SL7.
Edits: 08/22/14
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Are my ITs ok for this schematic? - shane. 00:56:53 08/22/14 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
