In Reply to: RE: Are big capacitors required after a B+ regulator? posted by Triode_Kingdom on August 20, 2014 at 17:02:17:
The application is for a SET electrostatic headphone amp. Current draw about 130mA, B+ somewhere around 350V. I started designing the circuit with a RIAA stage in mind but changed plans.
Here's the schematic.
Of course the final C is the case in point, simulating with .056uF did not show significant change.
Thanks for your comments! I'll let you know how it turns out.
Joris
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Are big capacitors required after a B+ regulator? - jorisdallaire 20:47:59 08/20/14 (0)