In Reply to: I take it the KT-88 is cathode biased posted by FenderLover on August 20, 2014 at 05:55:26:
Yes, cathode biased with a 450 ohm resistor bypassed with 100uF. There is 27 volts positive on the cathode for 60mA across the bias resistor. The KT88 is running just over 20 watts, and it is maxing out the output transformer to get a bit of OPT saturation. I have a 55v bias tap that I was going to play with, but maybe later.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: I take it the KT-88 is cathode biased - Chip647 06:55:38 08/20/14 (0)