How much capacitance should i use for pse kt88 mp

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Almost finished with the power supply for my PSE KT88 stereo amp and am wondering what amount of capacitance I should use for the CLCLC PS. The power supply will use a pair of 5AR4 which are then connected to an 80uf x 550v ASC film cap. Then to a 4H x 400ma x 28 DCR inductor, then I can go with 160uf or 100uf film cap to a 5H x 300ma x 29DCR inductor then to either 100uf or 200uf film caps. The power supply is on a separate chassis so I plan to use it with other amps in the future. I have OPT from a HK citation2 and also some DYNACO A430. So, I want this PS to cope with both SE and PP amp designs. thank you for your suggestions, Dak

This post is made possible by the generous support of people like you and our sponsors:

VH Audio

Topic - How much capacitance should i use for pse kt88 mp - DAK 21:14:23 08/12/14 (5)

RE: How much capacitance should i use for pse kt88 mp - hifipaul 04:22:35 08/17/14 (0)

RE: How much capacitance should i use for pse kt88 mp - rage 06:54:33 08/13/14 (1)

RE: How much capacitance should i use for pse kt88 mp - DAK 22:12:58 08/13/14 (0)

RE: How much capacitance should i use for pse kt88 mp - danlaudionut 23:59:59 08/12/14 (1)

RE: How much capacitance should i use for pse kt88 mp - DAK 01:38:03 08/13/14 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.