Watch out for voltage on the metal case

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Follow Ups Full Thread

Topic - running metal 6L6s in my Onix SP3? - gkargreen 16:12:49 07/27/14 (19)

if I measure the voltage drop across the cathode bias... - gkargreen 13:15:57 07/29/14 (9)

RE: if I measure the voltage drop across the cathode bias... - Jim McShane 14:18:49 07/29/14 (8)

RE: if I measure the voltage drop across the cathode bias... - gkargreen 18:09:06 07/29/14 (7)

RE: if I measure the voltage drop across the cathode bias... - Jim McShane 09:17:37 07/30/14 (5)

RE: if I measure the voltage drop across the cathode bias... - gkargreen 10:11:32 07/30/14 (4)

RE: Measure your voltage on pin 5 - Russ57 08:38:55 07/31/14 (3)

RE: Measure your voltage on pin 5 - gkargreen 08:50:17 07/31/14 (2)

RE: -33?????? - Russ57 14:46:28 08/01/14 (1)

RE: -33?????? - gkargreen 14:55:29 08/01/14 (0)

RE: bias is set rather differently - Russ57 20:58:30 07/29/14 (0)

thanks, all! ... - gkargreen 17:28:46 07/28/14 (4)

RE: thanks, all! ... - drlowmu 22:03:35 07/28/14 (3)

RE: thanks, Jeff! - gkargreen 07:56:23 07/29/14 (2)

Try this - Russ57 08:33:09 07/29/14 (1)

RE: Try this - gkargreen 13:26:16 07/29/14 (0)

Watch out for voltage on the metal case - Alpha Al 05:41:46 07/28/14 (1)

RE: Watch out for voltage on the metal case - BofService 19:38:02 07/28/14 (0)

RE: running metal 6L6s in my Onix SP3? - drlowmu 18:10:29 07/27/14 (0)

RE: running metal 6L6s in my Onix SP3? - Chip647 16:30:32 07/27/14 (0)

Follow Ups

Watch out for voltage on the metal case - Alpha Al 05:41:46 07/28/14 (1)

RE: Watch out for voltage on the metal case - BofService 19:38:02 07/28/14 (0)

Post a Message!