|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Not quite, let us step test it...... posted by drlowmu on July 10, 2012 at 18:58:13:
I will try this first and if I like it (and I probably will) I'll leave it at that. My whole point in beginning this thread was that after initially looking at the PS schematic, it simply looked too slow with the 220uf caps (and I didn't want to use electrolytics anyway).
If I'm going to bother building an amp it needs to be foundationally 'right' at the power supply. I can mess around with the amp section (breadboarded) after I get the PS built right.
Thanks for the schematic to build by. I appreciate the effort you put into it.
Larry D.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Thank you Jeff!! - lektrik 08:39:25 07/13/12 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
