Market - And How, Brother! n.t. - elektron

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Follow Ups Full Thread

Topic - What the buck? - 1973shovel 19:21:18 05/18/12 (27)

Here is a different approach to try..... - drlowmu 07:25:15 05/22/12 (5)

RE: Here is a different approach to try..... - Eli Duttman 19:06:40 05/23/12 (1)

RE: Here is a different approach to try..... - drlowmu 08:34:04 05/24/12 (0)

Thanks for the suggestions, Jeff - 1973shovel 06:30:01 05/23/12 (2)

RE: Thanks for the suggestions, Jeff - drlowmu 08:47:37 05/24/12 (1)

Market - And How, Brother! n.t. - elektron 12:00:02 05/24/12 (0)

RE: What the buck? - Jim McShane 12:55:46 05/19/12 (1)

RE: "you'll get significant voltage drop when it's loaded!!" - 1973shovel 17:09:38 05/19/12 (0)

RE: What the buck? - wheezer 20:41:50 05/18/12 (2)

6 or 7 volt drop was the goal - 1973shovel 17:12:53 05/19/12 (1)

RE: 6 or 7 volt drop was the goal - wheezer 16:06:06 05/20/12 (0)

RE: What the buck? - Eli Duttman 20:06:03 05/18/12 (9)

RE: both primaries in parallel and both secondaries in parallel - 1973shovel 17:15:05 05/19/12 (8)

RE: both primaries in parallel and both secondaries in parallel - Eli Duttman 18:00:46 05/19/12 (7)

RE: "you generate waste heat, but the tube heaters will not fail prematurely." - 1973shovel 07:38:46 05/20/12 (6)

RE: "you generate waste heat, but the tube heaters will not fail prematurely." - Eli Duttman 19:22:28 05/20/12 (5)

RE: "The 1st filter cap. can't exceed 20 mF" - 1973shovel 15:08:39 05/21/12 (4)

RE: "The 1st filter cap. can't exceed 20 mF" - Eli Duttman 17:29:50 05/21/12 (3)

Potato Masher - 1973shovel 05:18:05 05/22/12 (2)

RE: Potato Masher - Eli Duttman 18:49:35 05/22/12 (1)

RE: Potato Masher - 1973shovel 06:36:05 05/23/12 (0)

RE: What the buck? - Neff 19:30:33 05/18/12 (5)

RE: "Number 2 means use all windings for full current capacity." - 1973shovel 19:50:32 05/18/12 (4)

Late getting back, others covered your question....nt - Neff 05:59:47 05/19/12 (0)

RE: "Number 2 means use all windings for full current capacity." - wheezer 22:40:00 05/18/12 (2)

RE: "Number 2 means use all windings for full current capacity." - Wojciech 08:43:12 05/23/12 (1)

RE: "Number 2 means use all windings for full current capacity." - wheezer 12:40:35 05/23/12 (0)

Follow Ups

Market - And How, Brother! n.t. - elektron 12:00:02 05/24/12 (0)

Market - And How, Brother! n.t.

Post a Message!