Hello,
I am considering attempting to build a PAS3X clone. I am thinking of using one of the many ready made PCB sets, I would not be including any tone control options so I really do not want to use an old PAS chassis as the base. Has any done this and can share their experience? Are there any recommendations for an off the shelf case that would be practical for this project?
Thanks!
Alan
This post is made possible by the generous support of people like you and our sponsors:
Topic - DIY PAS 3X clone - alanj.martin@verizon.net 15:33:29 05/16/12 (14)
- If simply recorded acoustic music is a big part of your diet, a polarity switch is very valuable. - Timbo in Oz 15:40:56 05/17/12 (5)
- RE: If simply recorded acoustic music is a big part of your diet, a polarity switch is very valuable. - Eli Duttman 18:06:41 05/17/12 (4)
- Attached is a search result at RS Australia. - Timbo in Oz 00:32:35 05/22/12 (0)
- Yes Eli that's what I'm using but it's a biamped system so it's a 4PDT per channel. Now that I am going - Timbo in Oz 00:47:55 05/18/12 (2)
- RE: Yes Eli that's what I'm using but it's a biamped system so it's a 4PDT per channel. Now that I am going - Jim Womble 04:55:34 05/18/12 (1)
- It would still require switching after each of at least three stereo amps, at the same time. - Timbo in Oz 15:52:43 05/18/12 (0)
- RE: DIY PAS 3X clone - xaudiomanx 05:39:15 05/17/12 (0)
- If your mind's set on a PAS - 1973shovel 19:50:48 05/16/12 (0)
- RE: DIY PAS 3X clone - Neff 18:05:06 05/16/12 (1)
- RE: DIY PAS 3X clone - alanj.martin@verizon.net 19:03:40 05/16/12 (0)
- RE: DIY PAS 3X clone - Eli Duttman 17:43:26 05/16/12 (3)
- RE: DIY PAS 3X clone - alanj.martin@verizon.net 19:13:03 05/16/12 (2)
- RE: DIY PAS 3X clone - Triode_Kingdom 20:48:33 05/16/12 (0)
- RE: DIY PAS 3X clone - Eli Duttman 19:25:01 05/16/12 (0)