Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Re: Hash through chassis ground

63.246.182.161

> The real issue happens at the point where the SS diode is conducting the full load current then is asked to switch off. Their is a finite time it takes to sweep the minority cariers out the PN junction. What this means is when the diode is reverse biased at switch off, current starts flowing backwards through the SS diode.

Thanks for the explanation. I've always seen the spikes, but assumed they were just noise generated by the rapid on-off switching.

I still don't understand why the hybrid circuit won't create the same effect. The SS diodes in the schematic are performing the same task you've described. With or without the tube, the SS diodes deliver current, and are then suddenly asked to turn off. Why wouldn't the reverse current during that time be supplied by the power transformer? Are you certain the circuit eliminates the current spikes in the lead connected to ground?


This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  


Follow Ups Full Thread
Follow Ups
  • Re: Hash through chassis ground - Triode Kingdom 21:59:32 04/03/03 (0)


You can not post to an archived thread.