|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Another thing ... posted by DanK tubes on September 11, 2009 at 09:00:34:
At this inductance and cap value the resonant frequency will be too low to be useful (sub 10Hz). For a flat response you'll need 100K or so by my reckoning.
It's counterintuitive but it would take a MUCH lower cap value to provide boost at say 30 - 40Hz with your choke and you may not have much power headroom with a 45 anyway. A 300H choke with a 0.1uF cap (even undamped) would help if you want to attempt this.
Naz
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Another thing ... - Naz 16:08:37 09/11/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
