Home / FAQ / News
Classifieds / Events

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Sponsored Links

VH Audio - Cables, Tweaks, Accessories and DIY Parts

Free Classifieds

VISHAY S102K AUDIO RESISTORS - archaicaudio@webt...

some actual mercury numbers. - dave slagle 19:40:40 04/22/08 (7)
- RE: Couldn't agree more!! - benie 04:22:55 04/24/08 (0)
- Much ado about ... little - mikeyb 06:07:06 04/23/08 (3)
  - What exactly is your point here? - Michael V 10:05:35 04/23/08 (2)
    - No point if you're from California ;) (nt) - limono 19:57:08 04/23/08 (0)
    - Granted - mikeyb 10:53:15 04/23/08 (0)
- 8.3 milligrams - drlowmu 21:36:46 04/22/08 (1)
  - RE: 8.3 milligrams - PakProtector 03:20:50 04/23/08 (0)
BEST PREAMP - BlkNotes 16:26:03 04/22/08 (93)
- The "Dude". - Jack Seaton 18:45:47 04/28/08 (0)
- RE: BEST PREAMP - tomsyl1 16:10:29 04/27/08 (1)
  - RE: BEST PREAMP - GeneS 07:19:09 06/23/08 (0)
- I posted about the Hagerman Clarinet on Amp/Preamp - tubesforever 09:43:54 04/27/08 (0)
- RE: BEST PREAMP - Quest 10:47:44 04/24/08 (0)
- 3 types - Ed Sawyer 08:04:41 04/24/08 (0)
- Hello Rudy Van Gelder - Cleantimestream 19:50:03 04/23/08 (0)
- This is typical of what I have found in later preamps - Michael Samra 16:57:06 04/23/08 (3)
  - 99.99999% = 1:10,000,000 - Lew 18:52:47 04/23/08 (2)
    - RE: 99.99999% = 1:10,000,000 - Michael Samra 11:28:49 04/24/08 (1)
      - This is the preamp that I was talking about - Michael Samra 11:35:24 04/24/08 (0)
- Westrex - grhughes 16:49:46 04/23/08 (0)
- I consider most of these replies pointless... - Allen Wright 14:19:47 04/23/08 (3)
  - RE: I consider most of these replies pointless... - tomsyl1 16:14:45 04/27/08 (0)
  - RE: I consider most of these replies pointless... - Gingertube 21:02:49 04/23/08 (0)
  - RE: I consider most of these replies pointless... - PakProtector 15:17:27 04/23/08 (0)
- 10Y - transformer out - andy evans 14:12:58 04/23/08 (0)
- My preamp is the best, of course.... - thermionic addictions 13:40:37 04/23/08 (0)
- RE: BEST PREAMP - . 12:50:19 04/23/08 (25)
  - Passive inductive devices is not all angels. - cheap-Jack 12:58:00 04/23/08 (24)
    - But they sound better - . 13:28:59 04/23/08 (23)
      - Yes, "they sound better" to you, maybe. - cheap-Jack 13:42:29 04/23/08 (22)
        
        RE: Yes, "they sound better" to you, maybe. - dave slagle 20:06:14 04/23/08 (7)
        
        So the performance of a TVC is huge variable. - cheap-Jack 08:41:27 04/24/08 (6)
        
        RE: So the performance of a TVC is huge variable. - danlaudionut 11:33:00 04/25/08 (2)
        
        Why should we worry if we know the business. - cheap-Jack 11:38:40 04/28/08 (1)
        
        RE: Why should we worry if we know the business. - danlaudionut 11:56:17 04/28/08 (0)
        
        RE: So the performance of a TVC is huge variable. - Dave Cigna 16:01:40 04/24/08 (1)
        
        Yea, you mean iPod, don't you? - cheap-Jack 08:05:20 04/25/08 (0)
        
        Correction: last sentence of the first paragraph. - cheap-Jack 08:50:53 04/24/08 (0)
        
        RE: Yes, "they sound better" to you, maybe. - . 15:16:46 04/23/08 (0)
        
        Scary? - PakProtector 14:21:05 04/23/08 (12)
        
        Why variable O/P Z is a "benefit" to the receiving end? - cheap-Jack 07:01:42 04/24/08 (9)
        
        RE: Why variable O/P Z is a "benefit" to the receiving end? - Stephen R 10:15:21 04/24/08 (8)
        
        A rule of thumb is 1/10 of the I/P Z of the power amp. - cheap-Jack 12:31:09 04/24/08 (7)
        
        RE: A rule of thumb is 1/10 of the I/P Z of the power amp. - Stephen R 09:09:18 04/25/08 (3)
        
        Same 1/10 rule of thumb applies. - cheap-Jack 15:51:26 04/26/08 (2)
        
        RE: Same 1/10 rule of thumb applies. - Stephen R 04:55:41 04/27/08 (1)
        
        No such commercial attenuators exist, IMO. - cheap-Jack 11:26:56 04/28/08 (0)
        
        What would I lose by going to 60 or 6 ohms? (nt) - Dave Cigna 15:50:49 04/24/08 (2)
        
        Hope you read my humour! - cheap-Jack 08:52:34 04/25/08 (0)
        
        Don't worry, iPod is good enough for you! (nt) - cheap-Jack 08:06:54 04/25/08 (0)
        
        RE: Scary? - . 15:05:18 04/23/08 (1)
        
        absolutely...:) - PakProtector 15:15:03 04/23/08 (0)
- RE: Rozenblit's 12AU7 Line Preamp - jtkarma 08:16:06 04/23/08 (14)
  - Exploring the no preamp theory was one of the smartest things I’ve done. - saltyflies 09:55:27 04/24/08 (0)
  - Who is "proselytizing" whom? - cheap-Jack 11:06:44 04/23/08 (12)
    - your arguement about a piece of wire - PakProtector 11:36:10 04/23/08 (11)
      - Yes, "everything has some effect". - cheap-Jack 12:01:17 04/23/08 (10)
        
        it is never "a piece of wire" - PakProtector 15:33:30 04/23/08 (9)
        
        This is 'white wash' not "fixing"! - cheap-Jack 12:54:27 04/24/08 (8)
        
        Not quite... - PakProtector 17:35:52 04/24/08 (6)
        
        Don't talk cables with me, if I were you. - cheap-Jack 08:39:39 04/25/08 (5)
        
        RE: Don't talk cables with me, if I were you. - tube wrangler 08:58:18 04/26/08 (0)
        
        What about . . . - Thergit 18:21:32 04/25/08 (3)
        
        RE: What about . . . - tube wrangler 09:02:20 04/26/08 (2)
        
        RE: Oh, OH! There goes the Stereo.............! - Thergit 17:20:37 04/26/08 (1)
        
        RE: Oh, OH! There goes the Stereo.............! - tube wrangler 23:21:41 04/26/08 (0)
        
        so then... - PakProtector 17:31:04 04/24/08 (0)
- RE: BEST PREAMP - PakProtector 07:02:31 04/23/08 (0)
- so far - kstagger 05:10:36 04/23/08 (0)
- Optocoupler vol control is best... - 01A 19:54:05 04/22/08 (3)
  - Want to tell us more about it? - cheap-Jack 07:38:51 04/23/08 (2)
    - Optocouplers - Dave Garretson 17:30:18 04/23/08 (1)
      - Perkin Elmer Dual Vactrol - Mark Kelly 02:03:51 04/24/08 (0)
- RE: BEST PREAMP - Michael Samra 18:55:16 04/22/08 (0)
- RE: BEST PREAMP - gluca 17:04:16 04/22/08 (2)
  - Have a schematic you can share? (nt) - somejoe 02:09:27 04/23/08 (1)
    - schematic I can share - gluca 06:19:21 04/23/08 (0)
- RE: BEST PREAMP - Tre' 16:41:07 04/22/08 (23)
  - RE: BEST PREAMP - tomsyl1 16:40:38 04/27/08 (0)
  - RE: BEST PREAMP - BlkNotes 09:42:50 04/23/08 (3)
    - RE: BEST PREAMP - Tre' 11:49:57 04/23/08 (1)
      - Here comes from the mouth of a recording professional. - cheap-Jack 12:05:57 04/23/08 (0)
    - No, it is Not EvenThere. (nt) - cheap-Jack 11:10:35 04/23/08 (0)
  - RE: BEST PREAMP - Peter H-son 07:47:07 04/23/08 (2)
    - If I were you, I would have shut up! - cheap-Jack 09:33:27 04/23/08 (0)
    - Really? "Everything goes out of the window"? - cheap-Jack 08:41:35 04/23/08 (0)
  - YES, the best preamp is NO preamp.. - cheap-Jack 07:36:14 04/23/08 (3)
    - I beg to both agree and disagree.....the Hagerman Clarinet has me thinking.... - tubesforever 09:33:40 04/27/08 (0)
    - RE: YES, the best preamp is NO preamp.. - Peter H-son 08:30:33 04/23/08 (1)
      - Incorrect Sir - danlaudionut 15:35:39 04/26/08 (0)
  - Generalizations are hard to deal wtih - SteveBrown 18:19:21 04/22/08 (9)
    - RE: Generalizations are hard to deal wtih - Tre' 20:01:23 04/22/08 (7)
      - So let me get this right... - cjfrbw 01:14:39 04/24/08 (5)
        
        RE: So let me get this right... - Tre' 10:35:05 04/24/08 (4)
        
        RE: So let me get this right... - cjfrbw 10:45:13 04/24/08 (3)
        
        RE: So let me get this right... - Tre' 11:04:05 04/24/08 (2)
        
        RE: So let me get this right... - cjfrbw 11:29:20 04/24/08 (1)
        
        RE: So let me get this right... - Tre' 11:44:11 04/24/08 (0)
      - The N.E.T. Preamp - twystd 21:04:08 04/22/08 (0)
    - For me it's all about gain.... - Ivan303 19:50:15 04/22/08 (0)
  - RE: BEST PREAMP : - grinagog 17:07:19 04/22/08 (0)
Russian capacitor list - Michael Samra 16:02:57 04/22/08 (10)
- RE: Russian capacitor list - VlaUga 14:31:36 04/23/08 (6)
  - RE: Russian capacitor list (long) - twystd 18:19:06 04/23/08 (5)
    - At least with the caps I have evaluated.... - tubesforever 09:18:49 04/27/08 (1)
      - RE: At least with the caps I have evaluated.... - twystd 13:41:38 04/27/08 (0)
    - RE: Russian capacitor list (long) - VlaUga 16:17:14 04/24/08 (2)
      - RE: Russian capacitor list (long) - Michael Samra 12:32:03 04/25/08 (1)
        
        RE: Russian capacitor list (long) - VlaUga 17:20:03 04/25/08 (0)
- RE: Russian capacitor list - twystd 19:53:44 04/22/08 (2)
  - RE: Russian capacitor list - vumfsl@gmail.com 07:14:34 05/01/08 (1)
    - LOL (laughing out loud)! - twystd 17:01:01 05/01/08 (0)
Is vt4c still in business - sganti 08:58:38 04/22/08 (3)
- RE: Is vt4c still in business - sganti 20:08:12 04/22/08 (0)
- RE: Is vt4c still in business - DJL 17:03:56 04/22/08 (0)
- Not very recently. - cheap-Jack 09:17:04 04/22/08 (0)
Electrolytic storage life - Blooze 22:50:01 04/21/08 (1)
- RE: Electrolytic storage life - unclestu52 23:53:40 04/21/08 (0)
First driver design.. problems, comments? - Chris Snyder 19:56:59 04/21/08 (6)
- Nice schematic - somejoe 05:10:05 04/22/08 (1)
  - RE: Nice schematic - Chris Snyder 08:41:16 04/22/08 (0)
- But how are you sure you are cancelling the DC? - Allen Wright 02:02:26 04/22/08 (1)
  - RE: But how are you sure you are cancelling the DC? - Chris Snyder 08:24:31 04/22/08 (0)
- RE: First driver design.. problems, comments? - dave slagle 20:13:18 04/21/08 (1)
  - RE: First driver design.. problems, comments? - Chris Snyder 20:49:37 04/21/08 (0)
My first scratch build amp a mono block Darling variation (pics) - kellymon 19:16:44 04/21/08 (8)
- Very nice, schema please... NT - Lowrider 01:10:23 04/22/08 (6)
  - Schematic here, comments welcomed - kellymon 21:58:46 04/22/08 (5)
    - RE: Schematic here, comments welcomed - Lowrider 22:11:51 04/22/08 (4)
      - More iron - kellymon 09:07:55 04/23/08 (3)
        
        RE: More iron - Lowrider 22:13:34 04/23/08 (2)
        
        RE: More iron - kellymon 07:40:46 04/24/08 (1)
        
        RE: More iron - Lowrider 12:46:12 04/24/08 (0)
- RE: My first scratch build amp a mono block Darling variation (pics) - mqracing 19:41:17 04/21/08 (0)
what's inside the can of a 16309 - PakProtector 16:16:13 04/21/08 (7)
- RE: what's inside the can of a 16309 - Ed Fallon 16:37:29 04/21/08 (6)
  - RE: what's inside the can of a 16309 - PakProtector 15:56:17 04/22/08 (0)
  - RE: what's inside the can of a 16309 - mqracing 18:40:46 04/21/08 (4)
    - 16431 70 volt line tap on the secondary... - somejoe 15:54:55 04/22/08 (1)
      - 64 Ohms - PakProtector 17:13:45 04/22/08 (0)
    - What's this? A cap inside the potting? - throbbinnut 20:03:06 04/21/08 (1)
      - RE: What's this? A cap inside the potting? - mqracing 20:34:23 04/21/08 (0)
Pinging serenechaos about 6C45pi and EIMACs - gluca 16:02:48 04/21/08 (0)
How big K40 caps are available ? - pix 12:50:19 04/21/08 (16)
- I bought mine from Machmat - Lowrider 00:50:05 04/22/08 (0)
- What I know about Russian caps. - twystd 21:34:54 04/21/08 (13)
  - RE: What I know about Russian caps. - VlaUga 14:54:35 04/23/08 (7)
    - RE: What I know about Russian caps. - twystd 17:21:38 04/23/08 (6)
      - RE: What I know about Russian caps. - VlaUga 16:22:19 04/24/08 (5)
        
        RE: What I know about Russian caps. - twystd 20:57:43 04/24/08 (4)
        
        RE: What I know about Russian caps. - VlaUga 17:08:55 04/25/08 (3)
        
        Well each to their own. - twystd 17:48:39 04/25/08 (2)
        
        RE: Well each to their own. - VlaUga 15:35:08 04/26/08 (1)
        
        RE: Well each to their own. - Lowrider 04:10:48 04/27/08 (0)
  - RE: What I know about Russian caps. - Michael Samra 15:56:11 04/22/08 (0)
  - RE: What I know about Russian caps. - rdf 21:52:45 04/21/08 (3)
    - SSG-3 - Brian C. 00:23:03 04/22/08 (0)
    - RE: What I know about Russian caps. - twystd 22:09:36 04/21/08 (1)
      - RE: What I know about Russian caps. - rdf 23:26:17 04/21/08 (0)
- RE: How big K40 caps are available ? - diamondsouled 16:41:04 04/21/08 (0)
Great Capacitor Test - Nickel Core 11:55:50 04/21/08 (11)
- RE: Great Capacitor Test - Toto 07:50:49 05/16/08 (0)
- RE: Great Capacitor Test - electron2 13:34:47 04/27/08 (0)
- Nice Capacitor Comparison - TonyB 06:08:56 04/22/08 (1)
  - It would carry even more weight - sser2 10:47:12 04/22/08 (0)
- RE: Great Capacitor Test - Neff 23:39:29 04/21/08 (5)
  - The russians - Dave Garretson 06:25:36 04/22/08 (4)
    - Dave I can add the following..... - tubesforever 09:05:54 04/27/08 (1)
      - FT-3 - Dave Garretson 16:15:03 04/27/08 (0)
    - RE: The russians - Jon L 18:15:50 04/22/08 (1)
      - I agree Jon L... - JB 11:37:44 04/23/08 (0)
- Just Another Data point - Jon L 15:28:30 04/21/08 (0)
Tango NC20F for 437A? - Tube747 06:29:33 04/21/08 (3)
- Introducing Members to the Softone R-Core Interstage Transformers - drlowmu 12:05:14 04/21/08 (2)
  - Have you used one? NT - Michael V 09:43:59 04/22/08 (1)
    - RE: Have you used one? NT - drlowmu 13:27:51 04/22/08 (0)
What have I got here?? - Vinnie 15:19:15 04/20/08 (6)
- RE: What have I got here?? - Ed Fallon 21:44:37 04/20/08 (0)
- RE: What have I got here?? - lovetube 17:18:52 04/20/08 (2)
  - RE: What have I got here?? - Vinnie 18:41:27 04/20/08 (1)
    - RE: What have I got here?? - lovetube 19:33:13 04/20/08 (0)
- RE: Here's an end view - Vinnie 15:31:56 04/20/08 (1)
  - RE: Here's an end view - PakProtector 18:15:21 04/20/08 (0)
I am rejuvenated! I fixed my broken TV! - throbbinnut 15:11:06 04/20/08 (4)
- So Mick Jagger was wrong - dadbar 16:29:25 04/22/08 (0)
- Whatever you fix, beware CTR tvs are radioactive a& toxic. - cheap-Jack 12:12:46 04/21/08 (1)
  - It's cool, just bad vertical driver solder joint - throbbinnut 19:55:13 04/21/08 (0)
- Cool! Doubt if I'd get into my big CRT Panasonic... (nt) - Allen Wright 02:23:23 04/21/08 (0)
Help on CCS PP differential driver stage for SE 845 amp - swordsman 10:49:52 04/20/08 (5)
- RE: Help on CCS PP differential driver stage for SE 845 amp - Naz 05:54:01 04/21/08 (0)
- Diff driver? - Allen Wright 02:22:20 04/21/08 (1)
  - RE: Diff driver? - swordsman 10:32:13 04/21/08 (0)
- RE: Help on CCS PP differential driver stage for SE 845 amp - Eli Duttman 12:18:00 04/20/08 (1)
  - RE: Help on CCS PP differential driver stage for SE 845 amp - swordsman 23:27:08 04/20/08 (0)
Mercury Arc Rectifier - Frihed89 23:52:03 04/19/08 (32)
- Yes. Solid state diodes - gluca 14:51:06 04/21/08 (1)
  - The best reason yet. - Frihed89 00:03:30 04/22/08 (0)
- Mercury Vapor - no arcs please - elektron 11:56:47 04/20/08 (1)
  - RE: Mercury Vapor - yes and No - Frihed89 11:38:54 04/21/08 (0)
- RE: Mercury Arc Rectifier - Eli Duttman 08:18:54 04/20/08 (1)
  - Headphone amp. - Frihed89 11:00:26 04/20/08 (0)
- RE: Mercury Arc Rectifier - Neff 06:24:01 04/20/08 (0)
- RE: Mercury Arc Rectifier - . 02:55:24 04/20/08 (24)
  - yes, NT - Frihed89 07:14:10 04/20/08 (23)
    - RE: yes, NT - . 07:34:46 04/20/08 (22)
      - RE: yes, NT - Frihed89 11:04:36 04/20/08 (21)
        
        RE: yes, NT - . 11:14:14 04/20/08 (20)
        
        What about 5U4G ? - Frihed89 11:40:33 04/20/08 (19)
        
        RE: What about 5U4G ? - Eli Duttman 12:36:15 04/20/08 (5)
        
        RE: What about 5U4G ? - dave slagle 20:00:03 04/20/08 (2)
        
        RE: What about 5U4G ? - Eli Duttman 17:46:23 04/21/08 (1)
        
        RE: What about 5U4G ? - dave slagle 20:48:19 04/21/08 (0)
        
        RE: What about 5U4G ? - tube wrangler 14:47:32 04/20/08 (1)
        
        RE: What about 5U4G ? - benie 06:18:00 04/21/08 (0)
        
        RE: What about 5U4G ? - . 11:48:22 04/20/08 (0)
        
        RE: What about 5U4G ? Nope........ - Neff 11:47:32 04/20/08 (11)
        
        RE: What about 5U4G ? Nope........ - audiowiz73@alltel.net 15:00:56 04/20/08 (10)
        
        The original SinglePower SDS-T. - Frihed89 11:45:41 04/21/08 (0)
        
        The original item - Frihed89 00:49:21 04/21/08 (6)
        
        RE: The original item - benie 06:14:25 04/21/08 (2)
        
        Singlepower, but the website is not uptodate - Frihed89 09:12:55 04/21/08 (1)
        
        RE: Thanks for the info... (nt) - benie 12:46:03 04/21/08 (0)
        
        RE: The original item - somejoe 03:52:10 04/21/08 (1)
        
        Didn't I just say that? - Frihed89 09:16:09 04/21/08 (0)
        
        RE: The original item - tube wrangler 00:56:22 04/21/08 (0)
        
        No picture - Please post again... (nt) - somejoe 16:40:10 04/20/08 (1)
        
        I see it fine. - Frihed89 09:14:18 04/21/08 (0)
Does anyone have a source for .047@630v or 1000v - Michael Samra 23:40:39 04/19/08 (2)
- RE: Does anyone have a source for .047@630v or 1000v - vetmedrobert@gmail.com 17:26:07 04/20/08 (0)
- PM me Mikey - diamondsouled 12:45:40 04/20/08 (0)
You guys seem less like fanatics to me now. - LowRedMoon 22:22:57 04/19/08 (3)
- Yet...I am so, so curious . . . - Poindexter 20:32:50 04/20/08 (2)
  - Is that sound advice? (nt) - LowRedMoon 18:53:07 04/21/08 (1)
    - Didn't hurt me none. - Poindexter 20:08:25 04/21/08 (0)
K40 PIOs leaking? - Steve Jones 18:49:54 04/19/08 (2)
- RE: K40 PIOs leaking? - Michael Samra 20:23:23 04/19/08 (1)
  - Thanks. -nt - Steve Jones 09:13:08 04/20/08 (0)
How does one measure / debug 6bq5 amp frequency response - zobsky 14:39:27 04/19/08 (6)
- RE: How does one measure / debug 6bq5 amp frequency response - dspear99ca 11:24:54 04/21/08 (0)
- RE: How does one measure / debug 6bq5 amp frequency response - zobsky 07:06:58 04/20/08 (0)
- You don't need to put the 'scope anywhere near high voltage! - Allen Wright 03:26:44 04/20/08 (0)
- RE: How does one measure / debug 6bq5 amp frequency response - Caucasian Blackplate 21:42:26 04/19/08 (1)
  - RE: How does one measure / debug 6bq5 amp frequency response - zobsky 06:54:03 04/20/08 (0)
- RE: How does one measure / debug 6bq5 amp frequency response - Michael Samra 17:47:17 04/19/08 (0)
I need some advice and opinions about H+ and sound quality. - tubesforever 13:27:51 04/19/08 (10)
- RE: I need some advice and opinions about H+ and sound quality. - Neff 16:59:27 04/19/08 (0)
- RE: I need some advice and opinions about H+ and sound quality. - Ray Moth 16:28:51 04/19/08 (5)
  - RE: I need some advice and opinions about H+ and sound quality. - Michael Samra 18:53:38 04/19/08 (4)
    - Are the 6cg7 tubes readily available new? - tubesforever 19:33:34 04/19/08 (3)
      - RE: Are the 6cg7 tubes readily available new? - Michael Samra 23:37:28 04/19/08 (0)
      - RE: Are the 6cg7 tubes readily available new? - Michael Samra 20:39:06 04/19/08 (1)
        
        It would be interesting to see if I could use what I have learned - tubesforever 22:46:21 04/20/08 (0)
- Filament Voltages, DC cases - drlowmu 14:07:05 04/19/08 (2)
  - I think I will try a trim pot..... - tubesforever 22:41:44 04/20/08 (1)
    - RE: I think I will try a trim pot..... - drlowmu 21:17:33 04/25/08 (0)
Scratch build versus New Dynaco - Paully 11:11:49 04/19/08 (26)
- I bought a ST70 from Bob - Chris Snyder 18:45:17 04/21/08 (2)
  - Oh, and I should add... - Chris Snyder 19:04:01 04/21/08 (1)
    - RE: Oh, and I should add... - Paully 19:13:22 04/22/08 (0)
- You got to decide: to rebuild it with alien parts or upgrade it - cheap-Jack 13:07:27 04/21/08 (0)
- RE: Scratch build versus New Dynaco - Michael Samra 04:07:10 04/20/08 (8)
  - RE: Scratch build versus New Dynaco - PakProtector 10:03:03 04/20/08 (7)
    - RE: Scratch build versus New Dynaco - Paully 10:28:06 04/20/08 (6)
      - RE: Scratch build versus New Dynaco - PakProtector 10:49:26 04/20/08 (5)
        
        RE: Scratch build versus New Dynaco - Eli Duttman 12:52:20 04/20/08 (1)
        
        well... - PakProtector 12:58:45 04/20/08 (0)
        
        RE: Scratch build versus New Dynaco - Paully 11:43:28 04/20/08 (2)
        
        RE: Scratch build versus New Dynaco - PakProtector 11:54:47 04/20/08 (1)
        
        RE: Scratch build versus New Dynaco - Paully 12:20:42 04/20/08 (0)
- RE: Scratch build versus New Dynaco - Eli Duttman 13:31:45 04/19/08 (8)
  - RE: Scratch build versus New Dynaco - Neff 16:44:39 04/19/08 (0)
  - RE: Scratch build versus New Dynaco - Paully 15:29:22 04/19/08 (6)
    - RE: Scratch build versus New Dynaco - Eli Duttman 16:42:56 04/19/08 (5)
      - Ball park, what do you think I could build that for? (nt) - Paully 17:38:32 04/19/08 (4)
        
        RE: Ball park, what do you think I could build that for? (nt) - Eli Duttman 19:00:19 04/19/08 (3)
        
        Eli, - Neff 05:55:09 04/20/08 (1)
        
        RE: Eli, - Eli Duttman 07:44:14 04/20/08 (0)
        
        Are you getting a feel for cost, now? - Paully 19:31:02 04/19/08 (0)
- RE: Scratch build versus New Dynaco - caffeinator 11:49:10 04/19/08 (3)
  - RE: Scratch build versus New Dynaco - Paully 12:45:49 04/19/08 (2)
    - RE: Scratch build versus New Dynaco - caffeinator 16:20:06 04/19/08 (1)
      - RE: Scratch build versus New Dynaco - Paully 16:39:02 04/19/08 (0)
V-caps vs Black Gates - Audiogabby 06:28:16 04/19/08 (22)
- Black Gates in general - KIS 06:41:09 04/27/08 (0)
- Here is my two cents.... - tubesforever 13:19:06 04/19/08 (5)
  - Electrolytics needs to be charged up to the right V to work properly - KIS 06:35:37 04/27/08 (2)
    - The Voltage rating of a cap has absolutely nothing to do with its performance. - tubesforever 08:51:08 04/27/08 (1)
      - Totally disagree with your assesment of sound performance. I have done the hard yards. (nt) - KIS 10:37:02 04/27/08 (0)
  - Question for tubesforever - mbhcid 14:39:14 04/19/08 (1)
    - Hope others offer assistance too.... - tubesforever 23:04:31 04/20/08 (0)
- RE: V-caps vs Black Gates - Peter H-son 07:42:02 04/19/08 (14)
  - What !!!! - drlowmu 09:39:48 04/19/08 (11)
    - RE: What !!!! - Response34 12:23:29 04/20/08 (0)
    - Completely agree.... Resistors do have sound altering qualities - tubesforever 13:08:50 04/19/08 (4)
      - RE: Completely agree.... Resistors do have sound altering qualities - Neff 17:02:36 04/19/08 (0)
      - RE: Completely agree.... Resistors do have sound altering qualities - HoosierAudio 15:05:37 04/19/08 (2)
        
        I get my Vishay S102 nudes from Percy Audio..... - tubesforever 23:09:24 04/20/08 (1)
        
        RE: Texas Components - Dave Garretson 14:39:44 04/21/08 (0)
    - RE: What !!!! - Peter H-son 11:16:45 04/19/08 (4)
      - "Face reality" you say ? - drlowmu 14:23:47 04/19/08 (0)
      - RE: What !!!! - twystd 11:49:52 04/19/08 (2)
        
        Totally Agree part two - tubesforever 13:12:47 04/19/08 (1)
        
        RE: Totally Agree part two - Neff 00:19:47 04/22/08 (0)
  - RE: V-caps vs Black Gates - Audiogabby 08:17:59 04/19/08 (1)
    - RE: V-caps vs Black Gates - Peter H-son 08:56:00 04/19/08 (0)
PARTS QUALITY - xaudiomanx@aol.com 18:33:33 04/18/08 (4)
- RE: PARTS QUALITY & Ground - Ron Oehlert 07:24:51 04/21/08 (0)
- RE: PARTS QUALITY - scrooie looie 18:39:06 04/19/08 (0)
- RE: PARTS QUALITY - nerdorama 19:20:53 04/18/08 (1)
  - In support of the above - tubejack 06:21:36 04/19/08 (0)
is this a good opt choice for 300b - horny 15:03:53 04/18/08 (11)
- RE: is this a good opt choice for 300b - horny 13:03:07 04/19/08 (0)
- you cannot go wrong with hashimoto**eom** - Vril Disc 19:28:31 04/18/08 (0)
- RE: is this a good opt choice for 300b - Ciscokid 17:01:15 04/18/08 (2)
  - What are your impressions of that circuit? - LowRedMoon 21:58:26 04/18/08 (1)
    - RE: What are your impressions of that circuit? - Ciscokid 08:26:47 04/19/08 (0)
- RE: is this a good opt choice for 300b - danlaudionut 16:36:58 04/18/08 (4)
  - RE: is this a good opt choice for 300b - Peter H-son 17:00:06 04/18/08 (0)
  - RE: is this a good opt choice for 300b - Ciscokid 16:56:49 04/18/08 (2)
    - RE: is this a good opt choice for 300b - Peter H-son 18:36:47 04/18/08 (0)
    - Got cha (nt) - danlaudionut 16:59:02 04/18/08 (0)
- RE: is this a good opt choice for 300b - Peter H-son 16:13:10 04/18/08 (0)
Central NY/PA inmates - are there any good summer hamfests in the area? - LowRedMoon 12:53:29 04/18/08 (2)
- BETTER !! Vintage Radio/HiFi Show at Kutztown, PA May, 9-10, 2008 - Interstage Tranny 12:22:32 04/19/08 (1)
  - Righteous! I'll be there! Thanks IST! - LowRedMoon 18:38:19 04/19/08 (0)
Capacitor break-in time - Neff 02:29:37 04/18/08 (6)
- In my experience.... - tubesforever 13:36:07 04/19/08 (0)
- RE: Capacitor break-in time - tube wrangler 11:05:44 04/18/08 (2)
  - RE: Solder break-in time - Ray Moth 16:42:40 04/19/08 (1)
    - RE: Solder break-in time - tube wrangler 19:30:29 04/19/08 (0)
- RE: Capacitor break-in time - iamthanik@hotmail.com 08:03:44 04/18/08 (0)
- RE: Capacitor break-in time - Michael Samra 04:17:01 04/18/08 (0)
Paging drlowmu!!!!!!!!!!!!! - Vatron 12:00:51 04/17/08 (3)
- RE: Paging drlowmu!!!!!!!!!!!!! - Michael Samra 12:40:32 04/17/08 (2)
  - RE: Paging drlowmu!!!!!!!!!!!!! - drlowmu 15:23:48 04/17/08 (1)
    - RE: Paging drlowmu!!!!!!!!!!!!! - Michael Samra 17:37:51 04/17/08 (0)
Bypass cap in Cathode feedback loop - Jeff Davison 10:08:14 04/17/08 (2)
- RE: Bypass cap in Cathode feedback loop - twystd 13:52:48 04/17/08 (0)
- RE: Bypass cap in Cathode feedback loop - tubewade 11:58:59 04/17/08 (0)
Update on Pyramid pio caps - Michael Samra 18:02:13 04/16/08 (4)
- Mike on the tube socket cleaning.... - tubesforever 13:38:59 04/19/08 (1)
  - RE: Mike on the tube socket cleaning.... - Michael Samra 14:09:48 04/19/08 (0)
- RE: Update on Pyramid pio caps - gearhunter 05:24:24 04/17/08 (1)
  - RE: Update on Pyramid pio caps - Michael Samra 12:26:34 04/17/08 (0)
Cary SLP-88 preamp.....right channel out....??? - lektrik 17:56:15 04/16/08 (3)
- RE: Cary SLP-88 preamp.....right channel out....??? - Michael Samra 15:20:46 04/17/08 (0)
- RE: Cary SLP-88 preamp.....right channel out....??? - wpod 07:02:04 04/17/08 (1)
  - RE: Cary SLP-88 preamp.....right channel out....??? - reb 10:06:26 04/17/08 (0)
U-L Experiments? - PakProtector 16:34:37 04/16/08 (12)
- RE: U-L Experiments? - Pär 13:46:50 04/19/08 (0)
- RE: U-L Experiments? - Gingertube 20:55:21 04/17/08 (1)
  - Link to the thread on DIY Audio - Ray Moth 00:26:35 04/18/08 (0)
- If RDH(4) was " dogma".. - cheap-Jack 08:20:33 04/17/08 (7)
  - RE: If RDH(4) was " dogma".. - TimFox 13:22:58 04/17/08 (4)
    - Why want 1KV Vp so high? (nt) - cheap-Jack 08:30:29 04/18/08 (3)
      - RE: Why want 1KV Vp so high? (nt) - TimFox 03:23:50 04/19/08 (2)
        
        Interesting. Want to post us yr schematic? (nt) - cheap-Jack 10:46:30 04/21/08 (1)
        
        RE: Interesting. Want to post us yr schematic? (nt) - TimFox 14:43:18 04/21/08 (0)
  - RE: triode-straped the proper way? - eyes 09:59:21 04/17/08 (1)
    - The way I think most "proper" is.. - cheap-Jack 08:26:08 04/18/08 (0)
- RE: U-L Experiments? - Michael Samra 00:56:02 04/17/08 (0)
These caps .... any good ? - Stewen 13:10:06 04/16/08 (1)
- RE: These caps .... any good ? - Michael Samra 16:06:06 04/16/08 (0)
Transformer Potting cases - Jeff Davison 12:09:12 04/16/08 (3)
- RE: Transformer Potting cases - Henry Pasternack 18:39:49 04/16/08 (0)
- RE: Transformer Potting cases - Caucasian Blackplate 15:06:50 04/16/08 (0)
- RE: Transformer Potting cases - PakProtector 14:42:03 04/16/08 (0)
Pyramid Pio caps - Michael Samra 23:33:48 04/15/08 (4)
- RE: Pyramid Pio caps - iamthanik@hotmail.com 08:20:26 04/16/08 (3)
  - RE: Pyramid Pio caps - Michael Samra 15:59:17 04/16/08 (0)
  - RE: Pyramid Pio caps - gearhunter 13:02:36 04/16/08 (1)
    - RE: Pyramid Pio caps - Michael Samra 16:02:46 04/16/08 (0)
Magic Eye Circuit Quest - Steve Robertson 13:21:40 04/15/08 (15)
- RE: Magic Eye Circuit Quest - Steve Robertson 06:58:52 04/17/08 (0)
- RE: Magic Eye Circuit Quest - Ed Sawyer 18:53:24 04/16/08 (5)
  - I had a VoM R2R - kstagger 07:21:55 04/17/08 (0)
  - Nope, it depends on design. - cheap-Jack 06:59:48 04/17/08 (3)
    - RE: Nope, it depends on design. - Swanson 06:10:52 04/19/08 (1)
      - Nobody suggested audio signal driving a magic eye direct. - cheap-Jack 08:59:37 04/21/08 (0)
    - RE: Nope, it depends on design. - Alpha Al 21:33:29 04/17/08 (0)
- Audio Express link - kstagger 09:42:40 04/16/08 (0)
- RE: Magic Eye Circuit Quest - PeterP 16:37:37 04/15/08 (0)
- Try here for one circuit .... - tubejack 16:02:49 04/15/08 (1)
  - RE: Try here for one circuit .... - tubejack 16:06:08 04/15/08 (0)
- RE: Magic Eye Circuit Quest - Topper 15:56:21 04/15/08 (0)
- Welcome to the world of "magic eyes". - cheap-Jack 13:38:38 04/15/08 (2)
  - Thanks for that link - interesting website [NT] - Ray Moth 14:56:11 04/15/08 (1)
    - You're welcome! - cheap-Jack 08:04:13 04/16/08 (0)
Dyna(co, kit) PAS-2 0.22 uF caps -- I am confused - mhardy6647 06:31:06 04/15/08 (13)
- RE: Dyna(co, kit) PAS-2 0.22 uF caps -- I am confused - fred_troy@hotmail.com 07:53:22 04/20/08 (0)
- RE: Dyna(co, kit) PAS-2 0.22 uF caps -- I am confused - grhughes 15:03:43 04/15/08 (0)
- RE: Dyna(co, kit) PAS-2 0.22 uF caps -- I am confused - LikeWhatG? 12:27:21 04/15/08 (2)
  - naw, I forgot there was one, thanks (nt) - mhardy6647 17:46:41 04/15/08 (1)
    - Yea, beware yr wallet! - cheap-Jack 08:26:38 04/16/08 (0)
- If you follow the old school way like everybody else, - cheap-Jack 08:51:35 04/15/08 (6)
  - Ditto - Neff 18:49:08 04/16/08 (0)
  - It's not mine; the goal is to restore it, not recreate it (nt) - mhardy6647 11:21:06 04/15/08 (4)
    - If it is still working, why need to "restore" it? - cheap-Jack 12:29:27 04/15/08 (3)
      - replacing bad caps and the selenium rectifier - mhardy6647 17:46:00 04/15/08 (2)
        
        Such "restore" won't do much sonically to the preamp. - cheap-Jack 07:59:11 04/16/08 (0)
        
        oh, and adding a fuse (nt) - mhardy6647 17:47:32 04/15/08 (0)
- RE: Dyna(co, kit) PAS-2 0.22 uF caps -- I am confused - kstagger 06:45:10 04/15/08 (0)
German (220) radio on US (110) power? - dlmoss16@gmail.com 20:28:58 04/14/08 (3)
- RE: German (220) radio on US (110) power? - Alpha Al 07:12:59 04/15/08 (2)
  - RE: German (220) radio on US (110) power? - Gingertube 18:35:37 04/16/08 (0)
  - RE: German (220) radio on US (110) power? - Tom Bavis 16:49:53 04/15/08 (0)
Calling 304TL expert - gluca 15:05:46 04/14/08 (8)
- RE: Calling 304TL expert - dave slagle 16:31:18 04/14/08 (7)
  - RE: Calling 304TL expert - gluca 00:16:39 04/15/08 (3)
    - RE: Calling 304TL expert - dave slagle 05:57:20 04/15/08 (1)
      - RE: Calling 304TL expert - gluca 08:08:10 04/15/08 (0)
    - RE: Calling 304TL expert - SLM 00:46:43 04/15/08 (0)
  - damn radial tubes...:) - PakProtector 16:58:16 04/14/08 (2)
    - RE: damn radial tubes...:) - Ed Sawyer 19:01:27 04/16/08 (1)
      - RE: damn radial tubes...:) - PakProtector 13:45:43 04/17/08 (0)
cap question - Vinnie 14:27:27 04/14/08 (2)
- RE: cap question - Alpha Al 15:20:58 04/14/08 (1)
  - RE: cap question - Vinnie 14:13:57 04/15/08 (0)
Inverted Interstage transformers and Class A2 - . 13:55:30 04/14/08 (31)
- RE: Inverted Interstage transformers and Class A2 - Pär 04:32:02 04/15/08 (12)
  - Constant Grid Current in Class A2 - somejoe 13:53:22 04/15/08 (0)
  - RE: Inverted Interstage transformers and Class A2 - . 07:02:21 04/15/08 (10)
    - RE: Inverted Interstage transformers and Class A2 - mjk 00:32:26 04/17/08 (3)
      - RE: Inverted Interstage transformers and Class A2 - . 11:26:07 04/17/08 (2)
        
        Valab 200H Chokes - somejoe 11:46:08 04/17/08 (1)
        
        RE: Valab 200H Chokes - . 13:41:49 04/17/08 (0)
    - Neato Burrito! Got a schematic? (nt) - somejoe 13:51:38 04/15/08 (5)
      - RE: Neato Burrito! Got a schematic? (nt) - . 14:38:19 04/15/08 (4)
        
        RE: Neato Burrito! - somejoe 15:37:51 04/15/08 (2)
        
        RE: Neato Burrito! - . 15:55:59 04/15/08 (1)
        
        http://www.wind.sannet.ne.jp/yamayama/3C24AMP.htm - somejoe 17:08:55 04/15/08 (0)
        
        RE: Neato Burrito! - somejoe 15:37:11 04/15/08 (0)
- RE: Inverted Interstage transformers and Class A2 - somejoe 15:53:54 04/14/08 (17)
  - RE: Inverted Interstage transformers and Class A2 - Peter H-son 04:45:51 04/15/08 (11)
    - RE: Inverted Interstage transformers and Class A2 - dave slagle 05:46:53 04/15/08 (10)
      - RE: Inverted Interstage transformers and Class A2 - jub_jugs 06:21:12 04/15/08 (9)
        
        RE: Inverted Interstage transformers and Class A2 - dave slagle 07:02:58 04/15/08 (8)
        
        A2 and IITs - Jim Dowdy 07:19:41 04/15/08 (6)
        
        RE: A2 and IITs - . 09:47:59 04/15/08 (5)
        
        RE: A2 and IITs - mqracing 10:05:06 04/15/08 (4)
        
        more re: A2 and IITs - Jim Dowdy 10:17:01 04/15/08 (3)
        
        RE: more re: A2 and IITs - . 10:47:44 04/15/08 (2)
        
        RE: more re: A2 and IITs - dave slagle 11:55:22 04/15/08 (1)
        
        RE: more re: A2 and IITs - . 12:25:24 04/15/08 (0)
        
        RE: Inverted Interstage transformers and Class A2 - jub_jugs 07:18:43 04/15/08 (0)
  - RE: Inverted Interstage transformers and Class A2 - . 16:23:36 04/14/08 (4)
    - RE: Inverted Interstage transformers and Class A2 - jub_jugs 03:05:17 04/15/08 (3)
      - RE: Inverted Interstage transformers and Class A2 - . 06:54:06 04/15/08 (2)
        
        RE: Inverted Interstage transformers and Class A2 - jub_jugs 07:12:56 04/15/08 (1)
        
        RE: Inverted Interstage transformers and Class A2 - . 09:49:30 04/15/08 (0)
voltage question - horny 13:43:21 04/14/08 (10)
- RE: voltage question - horny 08:51:59 04/15/08 (1)
  - RE: voltage question - Ray Moth 15:12:53 04/15/08 (0)
- RE: voltage question - Ray Moth 19:01:07 04/14/08 (3)
  - RE: voltage question - horny 10:33:44 04/16/08 (0)
  - RE: voltage question - horny 22:47:35 04/14/08 (1)
    - 1.2K (nt) - danlaudionut 23:53:42 04/14/08 (0)
- RE: voltage question - Ray Moth 14:00:05 04/14/08 (3)
  - RE: voltage question - horny 14:33:25 04/14/08 (2)
    - RE: voltage question - danlaudionut 15:17:47 04/14/08 (1)
      - RE: voltage question - horny 15:29:16 04/14/08 (0)
How to fire up a LED from 6.3V AC filament power? - bequerel 08:23:25 04/14/08 (48)
- Think I will go the 120V AC route - bequerel 08:14:31 04/15/08 (4)
  - No, it is not a "trivial" post at all .. - cheap-Jack 09:03:21 04/15/08 (3)
    - OK. Enough suspense. Give up the circuit. (nt) - somejoe 21:05:33 04/15/08 (2)
      - Now, you should know the circuit. (nt) - cheap-Jack 13:50:08 04/16/08 (0)
      - Follow my post below to Chris. (nt) - cheap-Jack 08:15:15 04/16/08 (0)
- Like this... - Jim Hagerman 22:12:04 04/14/08 (0)
- RE: How to fire up a LED from 6.3V AC filament power? - slownlo 09:49:38 04/14/08 (0)
- A little thinking can have a LED working on 120VAC .. - cheap-Jack 09:34:29 04/14/08 (29)
  - here's my guess - throbbinnut 12:07:48 04/15/08 (22)
    - No "wizardry"! - cheap-Jack 12:25:28 04/15/08 (21)
      - RE: No "wizardry"! - throbbinnut 16:08:52 04/15/08 (20)
        
        Yes, you finally get the series shunt idea. - cheap-Jack 08:13:57 04/16/08 (19)
        
        RE: Yes, you finally get the series shunt idea. - throbbinnut 08:28:01 04/16/08 (18)
        
        No, it won't work! - cheap-Jack 08:44:17 04/16/08 (17)
        
        you misunderstood me - no series connections - throbbinnut 10:08:01 04/16/08 (16)
        
        MMmmm.. - cheap-Jack 11:09:51 04/16/08 (15)
        
        I thought you knew the answer? - throbbinnut 12:23:22 04/16/08 (14)
        
        Here you go... (long) - cheap-Jack 13:21:39 04/16/08 (13)
        
        like this? - Dave Cigna 16:59:34 04/16/08 (12)
        
        NO! - cheap-Jack 07:12:27 04/17/08 (11)
        
        RE: NO! - Dave Cigna 13:41:16 04/17/08 (4)
        
        Yes, you got it right. - cheap-Jack 09:09:01 04/18/08 (2)
        
        RE: Yes, you got it right. - Dave Cigna 09:51:51 04/18/08 (1)
        
        .....which is why I would not use this circuit - throbbinnut 10:43:28 04/18/08 (0)
        
        If that's the right circuit - Dave Cigna 07:42:55 04/18/08 (0)
        
        RE: NO! - . 07:49:51 04/17/08 (5)
        
        My "excuse" is I am an old schooler. - cheap-Jack 08:05:21 04/17/08 (4)
        
        RE: My "excuse" is I am an old schooler. - . 08:33:02 04/17/08 (3)
        
        What is your problem !!!!!! - cheap-Jack 08:55:22 04/17/08 (2)
        
        I have no problem , maybe it's all down to..... - . 08:58:00 04/17/08 (1)
        
        Yr first "problem" is to change yr original moniker! (nt) - cheap-Jack 09:02:40 04/17/08 (0)
  - RE: A little thinking can have a LED working on 120VAC .. - somejoe 18:18:31 04/14/08 (4)
    - Way too complicated even if it works! - cheap-Jack 07:53:14 04/15/08 (3)
      - RE: Way too complicated even if it works! - Carl Michaels 10:36:14 04/15/08 (2)
        
        What is yr "related question"? - cheap-Jack 10:40:49 04/15/08 (1)