Home / FAQ / News
Classifieds / Events

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Sponsored Links

VH Audio - Cables, Tweaks, Accessories and DIY Parts

Free Classifieds

FS: Bella Extreme 3205 Platinum Amplifi... - yo2tup

Unidentified Hammond organ amp - LowRedMoon 09:57:10 04/05/08 (2)
- RE: Unidentified Hammond organ amp - corerosin 16:07:17 04/05/08 (0)
- RE: iron= great! - Matts_ 15:31:04 04/05/08 (0)
Ping M.Samra-check these out - dee eye why 09:52:10 04/05/08 (9)
- RE: Ping M.Samra-check these out - Michael Samra 12:16:58 04/05/08 (0)
- RE: Ping M.Samra-check these out - Michael Samra 12:15:17 04/05/08 (7)
  - RE: Ping M.Samra-check these out - dee eye why 12:48:13 04/05/08 (6)
    - RE: Ping M.Samra-check these out - Michael Samra 15:05:00 04/05/08 (5)
      - RE: Ping M.Samra-check these out - dee eye why 21:17:17 04/05/08 (4)
        
        RE: Ping M.Samra-check these out - Michael Samra 00:49:18 04/06/08 (3)
        
        RE: Ping M.Samra-check these out - dee eye why 06:12:10 04/06/08 (2)
        
        RE: Ping M.Samra-check these out - Michael Samra 13:56:33 04/06/08 (0)
        
        RE: Ping M.Samra-check these out - Michael Samra 13:53:02 04/06/08 (0)
Woodward Schumacher PT - dwmclemore@knology.net 19:17:58 04/04/08 (5)
- RE: Woodward Schumacher PT - dwmclemore@knology.net 08:39:46 04/05/08 (0)
- RE: Woodward Schumacher PT - Ron Oehlert 22:07:57 04/04/08 (0)
- RE: Woodward Schumacher PT - dwmclemore@knology.net 19:39:27 04/04/08 (2)
  - RE: Woodward Schumacher PT - Ron Oehlert 22:31:13 04/04/08 (1)
    - RE: Woodward Schumacher PT - dwmclemore@knology.net 08:42:21 04/05/08 (0)
Has anyone suffered from " building burnout"? - Iczerman 14:10:43 04/04/08 (20)
- Suffering from debugging burnout - dadbar 20:58:02 04/06/08 (0)
- RE: Has anyone suffered from " building burnout"? - zacster 16:39:26 04/05/08 (0)
- RE: Has anyone suffered from " building burnout"? - kstagger 12:44:27 04/05/08 (0)
- RE: Has anyone suffered from " building burnout"? - JANDG 11:57:36 04/05/08 (0)
- RE: Has anyone suffered from " building burnout"? - Dman 11:38:06 04/05/08 (0)
- RE: Has anyone suffered from " building burnout"? - Neff 08:35:17 04/05/08 (4)
  - I have severe building burn-out right now - Nickel Core 10:41:42 04/05/08 (3)
    - RE: I have severe building burn-out right now - tube wrangler 23:12:10 04/06/08 (1)
      - RE: I have severe building burn-out right now - Nickel Core 01:56:09 04/08/08 (0)
    - RE: I have severe building burn-out right now - . 14:59:59 04/05/08 (0)
- RE: Has anyone suffered from " building burnout"? - SteveBrown 06:01:21 04/05/08 (0)
- RE: Has anyone suffered from " building burnout"? - jtkarma 17:30:56 04/04/08 (0)
- RE: Has anyone suffered from " building burnout"? - PakProtector 16:43:49 04/04/08 (2)
  - RE: Has anyone suffered from " building burnout"? - Michael Samra 17:28:05 04/06/08 (0)
  - or... - PakProtector 14:17:36 04/05/08 (0)
- RE: Has anyone suffered from " building burnout"? - mg16 16:42:14 04/04/08 (1)
  - link to article I'm referring to.. - mg16 16:45:43 04/04/08 (0)
- RE: Has anyone suffered from " building burnout"? - Chris O 14:49:53 04/04/08 (2)
  - Rotate your hobbies! - andy evans 18:08:27 04/04/08 (0)
  - I suffered "Brewing Burnout" until I discovered Belgian wild Lambic ales. Weird and delicious! (nt) - LowRedMoon 18:08:13 04/04/08 (0)
Can you reverse a power transformer? - Saul P 12:29:46 04/04/08 (14)
- incomplete info. What size fuse are you blowing? Which side is the fuse on? What load is on the HV side? /nt - hermanesque 08:52:15 04/05/08 (1)
  - RE: incomplete info. What size fuse are you blowing? Which side is the fuse on? What load is on the HV side? - Saul P 07:51:10 04/07/08 (0)
- RE: Can you reverse a power transformer? Yes - Neff 08:32:04 04/05/08 (0)
- RE: Can you reverse a power transformer? - dave slagle 13:33:15 04/04/08 (1)
  - RE: Can you reverse a power transformer? - Saul P 14:19:12 04/04/08 (0)
- No - throbbinnut 13:14:24 04/04/08 (8)
  - RE: No - dave slagle 13:28:10 04/04/08 (5)
    - alright smartaleck - throbbinnut 07:55:44 04/05/08 (4)
      - RE: alright smartaleck - dave slagle 08:19:44 04/05/08 (3)
        
        RE: alright smartaleck - TimFox 05:53:12 04/08/08 (0)
        
        I stand corrected - throbbinnut 09:46:16 04/06/08 (0)
        
        RE: alright smartaleck - Henry Pasternack 08:37:05 04/05/08 (0)
  - actually, let me rephrase that - in your example, No. - throbbinnut 13:17:18 04/04/08 (1)
    - Another Example: - gusser 15:23:16 04/04/08 (0)
Choke Input voltage sag? - Saul P 11:50:48 04/04/08 (5)
- Try a hybrid bridge rectifier? (nt) - Mike Spence 18:00:49 04/04/08 (0)
- RE: Choke Input voltage sag? - mikeyb 12:52:31 04/04/08 (0)
- RE: Choke Input voltage sag? - drlowmu 12:37:34 04/04/08 (0)
- RE: Choke Input voltage sag? - danlaudionut 12:12:27 04/04/08 (1)
  - Thanks! Oh well. -nt- - Saul P 12:32:30 04/04/08 (0)
In appreciation of drlowmu - dhsettim 04:46:09 04/04/08 (2)
- Have you tried some of his ideas Tim? NT - 01A 13:34:18 04/05/08 (0)
- Don't start. - Poindexter 09:28:08 04/04/08 (0)
Input resistance and pot substitute - please set me straight with this situation - LowRedMoon 00:28:52 04/04/08 (8)
- RE: Input resistance and pot substitute - please set me straight with this situation - dave slagle 05:09:55 04/04/08 (0)
- RE: Input resistance and pot substitute - please set me straight with this situation - drlowmu 04:30:12 04/04/08 (0)
- RE: Input resistance and pot substitute - please set me straight with this situation - danlaudionut 03:21:14 04/04/08 (5)
  - RE: Input resistance and pot substitute - please set me straight with this situation - Ray Moth 12:41:51 04/04/08 (0)
  - Of the three, this is the correct answer. - Allen Wright 06:00:56 04/04/08 (3)
    - RE: Of the three, this is the correct answer. - Tre' 08:24:44 04/04/08 (2)
      - RE: Of the three, this is the correct answer. - JimL 09:00:22 04/04/08 (1)
        
        yep. (nt) - Tre' 22:40:43 04/04/08 (0)
Pondering this: Using a gapped SE OPT in parafeed mode - zobsky 14:36:50 04/03/08 (3)
- RE: Pondering this: Using a gapped SE OPT in parafeed mode - mqracing 19:22:36 04/03/08 (1)
  - Thank You both - enlightening - zobsky 21:02:41 04/03/08 (0)
- RE: Pondering this: Using a gapped SE OPT in parafeed mode - danlaudionut 15:01:01 04/03/08 (0)
Is Michael Percy well? - Andy Nehan 14:27:44 04/03/08 (19)
- RE: Is Michael Percy well? - drlowmu 15:26:44 04/03/08 (16)
  - RE: Is Michael Percy well? - Michael Samra 15:36:28 04/03/08 (15)
    - RE: Is Michael Percy well? - drlowmu 16:05:39 04/03/08 (14)
      - A second big thank you to Michael! - tubesforever 23:42:06 04/04/08 (8)
        
        RE: A second big thank you to Michael! - tube wrangler 01:12:34 04/05/08 (7)
        
        Improving film caps, Don't miss this post !! (long) - drlowmu 10:22:10 04/05/08 (6)
        
        RE: Improving film caps, Don't miss this post !! (long) - dave slagle 06:15:22 04/06/08 (5)
        
        RE: Improving film caps, Don't miss this post !! (long) - drlowmu 08:03:46 04/06/08 (4)
        
        RE: Improving film caps, Don't miss this post !! (long) - Lew 12:37:55 04/06/08 (2)
        
        RE: Improving film caps, Don't miss this post !! (long) - tube wrangler 13:02:55 04/06/08 (1)
        
        Dennis, Where do you buy Siltech chassis wire? - Lew 07:09:43 04/07/08 (0)
        
        RE: Improving film caps, Don't miss this post !! (long) - dave slagle 09:15:24 04/06/08 (0)
      - RE: Is Michael Percy well? - Michael Samra 16:57:58 04/03/08 (4)
        
        RE: Is Michael Percy well? - drlowmu 17:03:58 04/03/08 (3)
        
        RE: Is Michael Percy well? - Michael Samra 19:50:27 04/03/08 (2)
        
        RE: Is Michael Percy well? - LikeWhatG? 19:55:06 04/03/08 (1)
        
        RE: Is Michael Percy well? - Michael Samra 21:14:50 04/03/08 (0)
- RE: Is Michael Percy well? - Lew 14:37:55 04/03/08 (1)
  - RE: Is Michael Percy well? - Andy Nehan 14:41:18 04/03/08 (0)
UL Parafeed - brianhagood@hotmail.com 12:26:55 04/03/08 (7)
- RE: UL Parafeed - PakProtector 14:35:11 04/03/08 (0)
- RE: UL Parafeed - Caucasian Blackplate 14:14:56 04/03/08 (5)
  - RE: UL Parafeed - mqracing 19:08:31 04/03/08 (3)
    - RE: UL Parafeed - Caucasian Blackplate 20:29:14 04/03/08 (2)
      - RE: UL Parafeed - mqracing 21:00:13 04/03/08 (1)
        
        RE: UL Parafeed - Caucasian Blackplate 21:03:23 04/03/08 (0)
  - RE: UL Parafeed - mqracing 18:58:07 04/03/08 (0)
Diode Rp post - mikeyb 11:53:34 04/03/08 (112)
- Child-Langmuir equation - Mark Kelly 04:51:51 04/04/08 (1)
  - RE: Child-Langmuir equation - TimFox 10:31:28 04/05/08 (0)
- RE: Diode Rp post - danlaudionut 14:46:29 04/03/08 (0)
- RE: Diode Rp post - Caucasian Blackplate 14:35:06 04/03/08 (0)
- RE: Diode Rp post - Stephen R 12:25:58 04/03/08 (107)
  - RE: Diode Rp post - Henry Pasternack 20:26:43 04/03/08 (4)
    - RE: Diode Rp post - Stephen R 07:42:37 04/04/08 (2)
      - RE: Diode Rp post - Henry Pasternack 17:13:23 04/04/08 (1)
        
        RE: Diode Rp post - Stephen R 01:26:29 04/05/08 (0)
    - A question of balance - Cleantimestream 03:40:27 04/04/08 (0)
  - RE: Diode Rp post - danlaudionut 14:56:08 04/03/08 (99)
    - RE: Diode Rp post - gusser 01:07:19 04/07/08 (0)
    - RE: Diode Rp post - Stephen R 00:41:38 04/04/08 (95)
      - RE: Diode Rp post - danlaudionut 03:09:15 04/04/08 (94)
        
        RE: Diode Rp post - Stephen R 07:20:30 04/04/08 (91)
        
        RE: Diode Rp post - danlaudionut 12:10:29 04/04/08 (90)
        
        As I said ... - Stephen R 02:16:33 04/05/08 (83)
        
        A picture is worth a thousand words - danlaudionut 04:21:52 04/05/08 (82)
        
        WAAACK !! - drlowmu 23:29:37 04/05/08 (3)
        
        you're missing the point - PakProtector 05:55:20 04/06/08 (1)
        
        point totally resolved herein, once and for all... - drlowmu 07:45:49 04/06/08 (0)
        
        RE: WAAACK !! - danlaudionut 05:36:03 04/06/08 (0)
        
        RE: A picture is worth a thousand words - tube wrangler 08:34:34 04/05/08 (1)
        
        RE: A picture is worth a thousand words - danlaudionut 08:39:58 04/05/08 (0)
        
        A picture is worth a thousand words IF ... - Stephen R 06:58:42 04/05/08 (75)
        
        RE: A picture is worth a thousand words IF ... - danlaudionut 07:14:56 04/05/08 (74)
        
        RE: A picture is worth a thousand words IF ... - Stephen R 09:36:08 04/05/08 (70)
        
        RE: A picture is worth a thousand words IF ... - danlaudionut 09:52:03 04/05/08 (69)
        
        RE: A picture is worth a thousand words IF ... - tube wrangler 10:29:20 04/05/08 (0)
        
        RE: A picture is worth a thousand words IF ... - Stephen R 10:22:01 04/05/08 (67)
        
        How do you explain different rectifiers sounding different? - mikeyb 12:38:49 04/06/08 (1)
        
        RE: How do you explain different rectifiers sounding different? - Stephen R 12:47:17 04/06/08 (0)
        
        RE: A picture is worth a thousand words IF ... - tube wrangler 10:58:50 04/05/08 (0)
        
        RE: A picture is worth a thousand words IF ... - danlaudionut 10:42:39 04/05/08 (61)
        
        For starters ... - Stephen R 11:56:45 04/05/08 (60)
        
        RE: For starters ... - danlaudionut 12:10:35 04/05/08 (59)
        
        so moving along ... - Stephen R 01:52:49 04/06/08 (39)
        
        RE: so moving along ... - danlaudionut 05:49:36 04/06/08 (38)
        
        RE: so moving along ... - Stephen R 10:06:42 04/06/08 (32)
        
        RE: so moving along ... - danlaudionut 12:00:28 04/06/08 (31)
        
        a string of small caps separated by small inductors - PakProtector 12:46:41 04/06/08 (2)
        
        RE: a string of small caps separated by small inductors - danlaudionut 13:55:20 04/06/08 (1)
        
        RE: a string of small caps separated by small inductors - drlowmu 16:26:12 04/06/08 (0)
        
        RE: so moving along ... - Stephen R 12:44:55 04/06/08 (27)
        
        RE: so moving along ... - danlaudionut 13:48:50 04/06/08 (26)
        
        RE: so not going anywhere now ... - Stephen R 10:34:37 04/07/08 (5)
        
        RE: so not going anywhere now ... - danlaudionut 15:02:38 04/07/08 (4)
        
        RE: so not going anywhere now ... - Stephen R 01:08:31 04/08/08 (1)
        
        None so blind as as those who will not see (nt) - danlaudionut 04:10:15 04/08/08 (0)
        
        PSUDii - PakProtector 17:13:57 04/07/08 (1)
        
        A lot of common sense and ... - Stephen R 05:18:25 04/08/08 (0)
        
        RE: so moving along ... - tube wrangler 14:18:57 04/06/08 (3)
        
        RE: so moving along ... - danlaudionut 14:27:24 04/06/08 (2)
        
        RE: so moving along ... - tube wrangler 14:47:49 04/06/08 (1)
        
        ASSUMING you mean what you say (nt) - danlaudionut 15:00:01 04/06/08 (0)
        
        this is my favourite...:) - PakProtector 14:08:51 04/06/08 (15)
        
        RE: this is my favourite...:) - tube wrangler 14:31:25 04/06/08 (14)
        
        RE: this is my favourite...:) - PakProtector 15:28:09 04/06/08 (6)
        
        RE: this is my favourite...:) - nc 15:31:24 04/06/08 (4)
        
        where? - PakProtector 15:38:04 04/06/08 (3)
        
        RE: where? - tube wrangler 16:06:28 04/06/08 (0)
        
        RE: where? - nc 15:47:02 04/06/08 (1)
        
        sounds about right to me - PakProtector 16:59:04 04/06/08 (0)
        
        RE: this is my favourite...:) - tube wrangler 15:31:08 04/06/08 (0)
        
        RE: AHA!! ASSUMPTIONS again! - danlaudionut 15:06:47 04/06/08 (6)
        
        RE: AHA!! ASSUMPTIONS again! - tube wrangler 15:34:08 04/06/08 (5)
        
        RE: AHA!! ASSUMPTIONS again! - danlaudionut 15:36:08 04/06/08 (4)
        
        Whoah, - drlowmu 22:28:01 04/06/08 (3)
        
        RE: Whoah, - danlaudionut 00:23:40 04/07/08 (2)
        
        RE: Whoah, - drlowmu 04:44:20 04/07/08 (1)
        
        RE: Whoah, - Thergit 14:51:25 04/07/08 (0)
        
        RE: so moving along ... - tube wrangler 09:04:17 04/06/08 (4)
        
        RE: so moving along ... - danlaudionut 12:22:08 04/06/08 (3)
        
        RE: so moving along ... - Rob F 16:46:00 04/07/08 (1)
        
        RE: so moving along ... - danlaudionut 16:51:48 04/07/08 (0)
        
        RE: so moving along ... - tube wrangler 13:10:35 04/06/08 (0)
        
        RE: For starters ... - tube wrangler 13:05:02 04/05/08 (0)
        
        RE: For starters ... - tube wrangler 13:02:34 04/05/08 (17)
        
        RE: For starters ... - Ray Moth 01:35:56 04/07/08 (0)
        
        RE: For starters ... - danlaudionut 13:14:16 04/05/08 (15)
        
        RE: For starters ... - tube wrangler 19:29:47 04/05/08 (0)
        
        Whats wrong up here?................. - drlowmu 16:58:48 04/05/08 (13)
        
        RE: Whats wrong up here?................. - mikeyb 12:48:54 04/06/08 (1)
        
        RE: Whats wrong up here?................. - tube wrangler 13:23:05 04/06/08 (0)
        
        you've missed the boat...again - PakProtector 04:56:01 04/06/08 (1)
        
        The boat has arrived, its in port..... - drlowmu 18:49:35 04/06/08 (0)
        
        RE: Whats wrong up here?................. - Thergit 21:44:34 04/05/08 (1)
        
        RE: Whats wrong up here?................. - drlowmu 23:17:25 04/05/08 (0)
        
        Once again you bring up the sound.. - castironandtubes 17:14:54 04/05/08 (6)
        
        RE: Once again you bring up the sound.. - danlaudionut 18:36:06 04/05/08 (0)
        
        Right you are................. In audio - drlowmu 18:04:58 04/05/08 (4)
        
        Except when - castironandtubes 00:25:05 04/06/08 (3)
        
        RE: Except when - tube wrangler 09:37:03 04/06/08 (1)
        
        Well explained Dennis.. - drlowmu 10:41:25 04/06/08 (0)
        
        RE: Except when - drlowmu 07:55:40 04/06/08 (0)
        
        that particular example - PakProtector 10:39:26 04/05/08 (1)
        
        RE: that particular example - drlowmu 17:05:35 04/05/08 (0)
        
        RE: A picture is worth a thousand words IF ... - tube wrangler 08:47:46 04/05/08 (2)
        
        RE: A picture is worth a thousand words IF ... - danlaudionut 08:53:17 04/05/08 (1)
        
        RE: A picture is worth a thousand words IF ... - tube wrangler 09:39:01 04/05/08 (0)
        
        RE: Diode Rp post - tube wrangler 14:58:24 04/04/08 (2)
        
        RE: Diode Rp post - danlaudionut 15:52:15 04/04/08 (0)
        
        so then... - PakProtector 15:35:22 04/04/08 (0)
        
        also... - PakProtector 13:03:57 04/04/08 (2)
        
        RE: also... - danlaudionut 13:08:56 04/04/08 (1)
        
        RE: also... - PakProtector 14:33:59 04/04/08 (0)
        
        RE: Diode Rp post - drlowmu 04:54:12 04/04/08 (1)
        
        RE: Diode Rp post - danlaudionut 06:08:34 04/04/08 (0)
    - RE: Diode Rp post - Tre' 17:44:02 04/03/08 (1)
      - I agree.(n/t) - vanofmonks 18:31:55 04/03/08 (0)
  - what point was that? - PakProtector 14:44:31 04/03/08 (0)
  - RE: Diode Rp post - drlowmu 14:09:42 04/03/08 (0)
Well, here's what I've learned... - Pete Millett 08:55:34 04/03/08 (38)
- Then they go and do the same elsewhere... - Lowrider 23:54:42 04/04/08 (0)
- My take (long) - twystd 16:40:28 04/04/08 (1)
  - RE: My take (long) - Salectric 05:02:15 04/05/08 (0)
- What hole pattern do your blinders have??? - grhughes 11:40:36 04/04/08 (2)
  - RE: What hole pattern do your blinders have??? - RC Daniel 17:10:28 04/04/08 (0)
  - RE: What hole pattern do your blinders have??? - Lew 13:24:30 04/04/08 (0)
- RE: Well, here's what I've learned... - arend-jan 02:21:06 04/04/08 (0)
- Me, too (nt) - Henry Pasternack 20:35:16 04/03/08 (0)
- RE: Well, here's what I've learned... - JANDG 19:46:43 04/03/08 (0)
- You're right... - Solder n Listen 17:20:38 04/03/08 (0)
- I'm with you - kstagger 15:37:20 04/03/08 (0)
- RE: Well, here's what I've learned... - MikeT 14:49:01 04/03/08 (12)
  - Well said! - Ray Moth 13:22:30 04/04/08 (0)
  - What you said - Carl Michaels 05:10:42 04/04/08 (9)
    - Who IS Ignorant ?????????????? - drlowmu 12:28:11 04/04/08 (8)
      - You see - castironandtubes 21:41:53 04/04/08 (7)
        
        RE: You see - tube wrangler 02:05:15 04/05/08 (6)
        
        RE: You see - castironandtubes 07:11:30 04/05/08 (5)
        
        RE: You see - tube wrangler 09:15:08 04/05/08 (4)
        
        RE: You see - castironandtubes 09:50:55 04/05/08 (3)
        
        RE: You see - tube wrangler 10:36:43 04/05/08 (2)
        
        RE: You see - mach1 21:03:52 04/05/08 (1)
        
        RE: You see - tube wrangler 23:03:16 04/05/08 (0)
  - Amen Brother (nt) - danlaudionut 15:33:12 04/03/08 (0)
- RE: Well, here's what I've learned... - Caucasian Blackplate 14:11:11 04/03/08 (0)
- Right behind you, Pete - KurtP 13:20:22 04/03/08 (4)
  - where do you go for good advice ... - Balle Clorin 12:35:55 04/04/08 (1)
    - RE: where do you go for good advice ... - danlaudionut 07:33:43 04/05/08 (0)
  - For real advice ... where? - Balle Clorin 12:32:50 04/04/08 (1)
    - RE: For real advice ... where? - Jim in Blacksburg 21:21:48 04/05/08 (0)
- That would be a big loss for the Asylum. - sser2 12:18:38 04/03/08 (1)
  - RE: That would be a big loss for the Asylum. - PakProtector 13:48:11 04/03/08 (0)
- RE: Well, here's what I've learned... - Larpy 11:33:09 04/03/08 (0)
- RE: Well, here's what I've learned... - Stephen R 11:09:32 04/03/08 (0)
- RE: Not just on this forum - reb 11:08:47 04/03/08 (0)
- You are right - Chris O 09:59:40 04/03/08 (0)
- RE: Well, here's what I've learned... - mg16 09:17:29 04/03/08 (1)
  - Yeah, what he said! Thanks.(nt.) - dee eye why 09:42:43 04/03/08 (0)
What is the correct length-to-diameter ratio for internal wiring ? - mach1 21:44:32 04/02/08 (23)
- RE: What is the correct length-to-diameter ratio for internal wiring ? - . 14:14:40 04/06/08 (0)
- RE: What is the correct length-to-diameter ratio for internal wiring ? - DonnG 19:05:16 04/03/08 (3)
  - RE: What is the correct length-to-diameter ratio for internal wiring ? - danlaudionut 21:59:14 04/03/08 (2)
    - RE: What is the correct length-to-diameter ratio for internal wiring ? - mach1 22:50:34 04/03/08 (1)
      - RE: What is the correct length-to-diameter ratio for internal wiring ? - danlaudionut 03:13:01 04/04/08 (0)
- RE: What is the correct length-to-diameter ratio for internal wiring ? - Peter H-son 14:38:42 04/03/08 (0)
- How & why "performance will suffer considerably"? (nt) - cheap-Jack 08:26:34 04/03/08 (2)
  - RE: How & why "performance will suffer considerably"? (nt) - mach1 16:23:38 04/03/08 (1)
    - Uh-oh, Dennis again? (nt) - cheap-Jack 08:53:11 04/04/08 (0)
- RE: What is the correct length-to-diameter ratio for internal wiring ? - mikeyb 07:05:19 04/03/08 (3)
  - What "golden ratio"? (nt) - cheap-Jack 08:43:56 04/03/08 (2)
    - RE: What "golden ratio"? (nt) - Solder n Listen 16:41:11 04/03/08 (0)
    - RE: What "golden ratio"? (nt) - mikeyb 08:59:41 04/03/08 (0)
- If you want to be neurotic about something.... - JimL 06:36:15 04/03/08 (1)
  - What he said - Thergit 13:58:13 04/04/08 (0)
- )1:1 nt - REL54 05:39:40 04/03/08 (0)
- RE: What is the correct length-to-diameter ratio for internal wiring ? - horny 21:55:58 04/02/08 (6)
  - RE: What is the correct length-to-diameter ratio for internal wiring ? - mach1 22:27:06 04/02/08 (5)
    - RE: What is the correct length-to-diameter ratio for internal wiring ? - Tre' 09:00:02 04/03/08 (1)
      - Now way Tre, you're so wrong ; ) - Caucasian Blackplate 14:26:07 04/03/08 (0)
    - RE: What is the correct length-to-diameter ratio for internal wiring ? - Thergit 05:17:07 04/03/08 (1)
      - RE: What is the correct length-to-diameter ratio for internal wiring ? - mach1 18:40:57 04/03/08 (0)
    - This is something you'll have to ask Dennis directly... - Allen Wright 23:52:28 04/02/08 (0)
Things I have learned recently - Henry Pasternack 19:39:34 04/02/08 (22)
- RE: Things I have learned recently - DonnG 13:51:46 04/03/08 (1)
  - RE: Things I have learned recently - Henry Pasternack 20:34:35 04/03/08 (0)
- Intelligence is, apparently, subjective. - Chris O 09:52:27 04/03/08 (0)
- Dear oh dear ..... - Stephen R 00:14:36 04/03/08 (11)
  - What "position" you said he got? (nt) - cheap-Jack 08:55:25 04/03/08 (3)
    - Sorry cj, don't understand your question (nt) - Stephen R 10:48:00 04/03/08 (2)
      - RE: Sorry cj, don't understand your question (nt) - Tre' 12:49:06 04/03/08 (1)
        
        thanks (nt) - Stephen R 14:57:23 04/03/08 (0)
  - RE: Dear oh dear ..... - Thergit 05:07:14 04/03/08 (4)
    - RE: Dear oh dear ..... - mjk 19:27:48 04/05/08 (0)
    - RE: Dear oh dear ..... - kyle 19:45:36 04/03/08 (1)
      - Works both ways.... - Ivan303 20:19:29 04/03/08 (0)
    - RE: Dear oh dear ..... - Tre' 12:55:20 04/03/08 (0)
  - You forgot point #13... - Henry Pasternack 04:50:34 04/03/08 (1)
    - RE: You forgot point #13... - Thergit 05:12:11 04/03/08 (0)
- #12 - danlaudionut 23:58:56 04/02/08 (0)
- Alternative #11 - Pär 22:22:33 04/02/08 (0)
- If I might at a #11... - Ivan303 20:17:01 04/02/08 (4)
  - RE: If I might at a #11... - becketma@yahoo.com 02:32:01 04/03/08 (0)
  - RE: If I might at a #11... - andy evans 02:30:57 04/03/08 (2)
    - and 12 ? - coresta 05:55:22 04/03/08 (1)
      - RE: "time you lost in front of your PC instead of music listening !" - Ivan303 06:46:20 04/03/08 (0)
testing outputs - PakProtector 17:30:01 04/02/08 (5)
- nevermind...:) - PakProtector 13:41:28 04/03/08 (2)
  - RE: nevermind...:) - boris_the_blade 07:09:23 04/04/08 (1)
    - RE: nevermind...:) - PakProtector 13:07:21 04/04/08 (0)
- RE: testing outputs - limono 18:14:19 04/02/08 (1)
  - the more the merrier...:) - PakProtector 18:21:01 04/02/08 (0)
what are these called? - dave slagle 07:38:43 04/02/08 (16)
- Dave try - Russ57 10:03:49 04/03/08 (0)
- Jubilee clips in the UK - andy evans 02:36:04 04/03/08 (0)
- RE: what are these called? - sitting duck 20:35:55 04/02/08 (0)
- I believe that's a chastity belt! NT - EZ_Angus 13:31:19 04/02/08 (0)
- T-Bolt Hose and Tube Clamps - Mr. Lowther 13:29:40 04/02/08 (1)
  - RE: T-Bolt Hose and Tube Clamps - dave slagle 14:21:44 04/02/08 (0)
- RE: what are these called? - sheldone 13:01:25 04/02/08 (0)
- RE: what are these called? - awsjr 09:41:44 04/02/08 (0)
- RE: what are these called? - Pete Millett 09:11:51 04/02/08 (0)
- RE: what are these called? - tube wrangler 08:39:50 04/02/08 (5)
  - RE: what are these called? - Lew 12:55:57 04/02/08 (3)
    - RE: what are these called? - drlowmu 08:44:54 04/03/08 (2)
      - Porsches - Lew 08:59:28 04/03/08 (1)
        
        RE: Porsches - drlowmu 10:35:06 04/03/08 (0)
  - RE: what are these called? - dave slagle 09:00:30 04/02/08 (0)
- RE: what are these called? - kal1971@juno.com 08:12:35 04/02/08 (0)
Added cap to mm section. What did I do wrong? - tmw57 20:45:56 04/01/08 (2)
- RE: Added cap to mm section. What did I do wrong? - casouza 21:19:29 04/01/08 (1)
  - Exactly, most cap meters just want to see capacitance... - Allen Wright 03:11:02 04/02/08 (0)
What Transformer for this Tube? - Solder n Listen 16:20:05 04/01/08 (6)
- Close-up of Umac 606... - Ivan303 07:38:26 04/02/08 (1)
  - Those with the dual - REL54 16:06:01 04/02/08 (0)
- RE: What Transformer for this Tube? - Caucasian Blackplate 22:16:20 04/01/08 (0)
- RE: What Transformer for this Tube? - Pete Millett 18:35:31 04/01/08 (2)
  - oh yeah! - zarniwoop 07:15:50 04/02/08 (1)
    - modulator, amplifier ...and oscillator ! - coresta 07:33:24 04/03/08 (0)
voltagedoubler for bias ? - Stewen 14:28:39 04/01/08 (6)
- Optimum would be more like this .... - drlowmu 17:25:57 04/02/08 (0)
- RE: voltagedoubler for bias ? - Eli Duttman 16:59:37 04/01/08 (3)
  - RE: voltagedoubler for bias ? - Stewen 08:08:51 04/02/08 (2)
    - RE: voltagedoubler for bias ? - Eli Duttman 17:25:24 04/02/08 (1)
      - RE: voltagedoubler for bias ? - Stewen 12:23:50 04/03/08 (0)
- RE: voltagedoubler for bias ? - Chris O 15:08:02 04/01/08 (0)
Anyone have recommendations for catode bypass caps )100uf, )200V? - LowRedMoon 14:27:23 04/01/08 (10)
- RE: Anyone have recommendations for catode bypass caps )100uf, )200V? - Retsel 12:49:20 04/02/08 (0)
- The Panasonic TSHB work for me...try them and find out if they are for you - Bas Horneman 15:09:08 04/01/08 (0)
- Do you really need a 200V rating? - Lew 14:51:50 04/01/08 (7)
  - RE: Do you really need a 200V rating? - drlowmu 15:49:14 04/01/08 (6)
    - Low-power SET's, mainly... - LowRedMoon 15:57:07 04/01/08 (5)
      - RE: Low-power SET's, mainly... - Lew 20:36:22 04/01/08 (1)
        
        RE: Low-power SET's, mainly... - Ray Moth 14:21:59 04/04/08 (0)
      - RE: Low-power SET's, mainly... - drlowmu 17:07:49 04/01/08 (0)
      - RE: Low-power SET's, mainly... - mach1 16:48:25 04/01/08 (0)
      - RE: Low-power SET's, mainly... - Neff 16:05:04 04/01/08 (0)
Ping: Tube Wrangler - mqracing 13:03:41 04/01/08 (1)
- RE: Ping: Tube Wrangler - tube wrangler 22:43:01 04/01/08 (0)
I have some NOS Russian k40y-9 caps to trade - reb 11:09:59 04/01/08 (0)
Need help with designing pcb board layout - marchewd 10:50:12 04/01/08 (11)
- My 2 cents - grhughes 16:50:09 04/01/08 (2)
  - more.... - grhughes 17:01:45 04/01/08 (1)
    - RE: more.... - marchewd 17:44:02 04/01/08 (0)
- RE: Need help with designing pcb board layout - Caucasian Blackplate 16:07:08 04/01/08 (1)
  - RE: Need help with designing pcb board layout - marchewd 17:38:59 04/01/08 (0)
- RE: Need help with designing pcb board layout - gusser 12:51:32 04/01/08 (0)
- RE: Need help with designing pcb board layout - marchewd 12:49:15 04/01/08 (2)
  - In that case...just start drawing..on paper.. - Bas Horneman 13:40:05 04/01/08 (0)
  - RE: Need help with designing pcb board layout - gusser 12:54:23 04/01/08 (0)
- PCBs?, you don't need no stinkin' PCBs - Chris O 12:33:41 04/01/08 (1)
  - RE: It will sound better? - gusser 12:44:29 04/01/08 (0)
20khz sq on the si50 leak. - Michael Samra 20:34:10 03/31/08 (2)
- RE: 20khz sq on the si50 leak. - boris_the_blade 21:59:02 04/02/08 (1)
  - RE: 20khz sq on the si50 leak. - Michael Samra 23:57:35 04/02/08 (0)
This would be a good deal for someone - Michael Samra 21:02:07 03/30/08 (6)
- RE: This would be a good deal for someone - JimL 09:41:53 03/31/08 (1)
  - RE: This would be a good deal for someone - Michael Samra 13:20:08 03/31/08 (0)
- Hi Mike - lovetube 00:40:52 03/31/08 (3)
  - RE: Hi Mike - Michael Samra 02:47:14 03/31/08 (2)
    - RE: Hi Mike - lovetube 04:08:40 03/31/08 (1)
      - RE: Hi Mike - Michael Samra 13:21:14 03/31/08 (0)
6V6 single ended amp VS darling 1626 amp - tubtub 20:55:26 03/30/08 (8)
- RE: 6V6 single ended amp VS darling 1626 amp - tubtub 17:07:44 03/31/08 (0)
- RE: 6V6 single ended amp VS darling 1626 amp - Larry D. Moore 10:48:42 03/31/08 (0)
- RE: 6V6 single ended amp VS darling 1626 amp - Eli Duttman 21:11:52 03/30/08 (5)
  - RE: 6V6 single ended amp VS darling 1626 amp - Michael Samra 23:40:37 03/31/08 (0)
  - Options - PakProtector 17:41:55 03/31/08 (3)
    - RE: Options - zobsky 09:03:03 04/01/08 (1)
      - Si' - PakProtector 16:30:33 04/01/08 (0)
    - RE: Options - Michael Samra 23:44:11 03/31/08 (0)
What power supply upgrades has anyone done to the altec 1569s? - Michael Samra 19:52:47 03/30/08 (14)
- RE: What power supply upgrades has anyone done to the altec 1569s? - rstrickler 16:07:30 03/31/08 (5)
  - RE: What power supply upgrades has anyone done to the altec 1569s? - Michael Samra 03:43:39 04/01/08 (1)
    - RE: What power supply upgrades has anyone done to the altec 1569s? - rstrickler 08:47:25 04/01/08 (0)
  - RE: What power supply upgrades has anyone done to the altec 1569s? - Michael Samra 18:54:52 03/31/08 (2)
    - RE: What power supply upgrades has anyone done to the altec 1569s? - drlowmu 20:25:49 03/31/08 (1)
      - RE: What power supply upgrades has anyone done to the altec 1569s? - Michael Samra 22:44:00 03/31/08 (0)
- Been there, Done that... - drlowmu 15:36:54 03/31/08 (7)
  - Nice post (nt) - Mike Spence 18:06:12 04/04/08 (0)
  - TThanks Jeffie. You be the man when it comes to chokes. - Michael Samra 18:56:50 03/31/08 (5)
    - RE: Thanks Jeffie. You be the man when it comes to chokes. - drlowmu 20:13:40 03/31/08 (4)
      - RE: Thanks Jeffie. You be the man when it comes to chokes. - Michael Samra 03:50:22 04/01/08 (0)
      - RE: Thanks Jeffie. You be the man when it comes to chokes. - Michael Samra 22:36:38 03/31/08 (2)
        
        RE: Thanks Jeffie. You be the man when it comes to chokes. - drlowmu 04:57:37 04/01/08 (1)
        
        RE: Thanks Jeffie. You be the man when it comes to chokes. - Michael Samra 12:10:01 04/01/08 (0)
they sure look cool when they die. - dave slagle 19:09:39 03/30/08 (13)
- RE: they sure look cool when they die. - arend-jan 04:33:47 04/01/08 (3)
  - RE: they sure look cool when they die. - . 06:59:18 04/01/08 (2)
    - RE: they sure look cool when they die. - dave slagle 08:09:49 04/01/08 (1)
      - RE: they sure look cool when they die. - . 08:43:34 04/01/08 (0)
- RE: they sure look cool when they die. - . 06:24:48 03/31/08 (2)
  - RE: they sure look cool when they die. - dave slagle 07:04:33 03/31/08 (1)
    - RE: they sure look cool when they die. - . 07:44:43 03/31/08 (0)
- I had some 3C24 tubes that looked like that. - JLH 03:18:55 03/31/08 (2)
  - RE: I had some 3C24 tubes that looked like that. - dave slagle 06:21:42 03/31/08 (1)
    - RE: I had some 3C24 tubes that looked like that. - Gary P 11:29:29 04/03/08 (0)
- What is it? - Poindexter 21:17:57 03/30/08 (1)
  - RE: What is it? - dave slagle 06:04:54 03/31/08 (0)
- RE: they sure look cool when they die. - tubewade 19:18:03 03/30/08 (0)
Stacked PS supply or custom PT ? - limono 18:37:32 03/30/08 (3)
- RE: Stacked PS supply or custom PT ? - Eli Duttman 20:38:27 03/30/08 (1)
  - Link for this nt - Caucasian Blackplate 17:48:41 03/31/08 (0)
- RE: Stacked PS supply or custom PT ? - Michael Samra 20:20:36 03/30/08 (0)
West Cap vs Silver Mica - Neff 17:14:06 03/30/08 (10)
- RE: West Cap vs Silver Mica - Michael Samra 18:27:53 03/30/08 (4)
  - Michael - - LowRedMoon 23:56:10 03/30/08 (3)
    - RE: Michael - - Michael Samra 02:49:18 03/31/08 (2)
      - RE: Michael - - rdf 08:41:22 03/31/08 (1)
        
        RE: Michael - - Michael Samra 14:42:11 03/31/08 (0)
- Coupling? - Caucasian Blackplate 17:34:28 03/30/08 (4)
  - RE: Coupling? - GTCharlie 18:00:55 03/30/08 (0)
  - Some phono stages use low values.....nt - Neff 17:47:42 03/30/08 (1)
    - Post the schemo nt - Caucasian Blackplate 18:14:58 03/30/08 (0)
  - RE: Coupling? - Neff 17:45:51 03/30/08 (0)
Cathode bias methods - Neff 11:56:50 03/30/08 (6)
- RE: Cathode bias methods - Gingertube 16:54:25 03/30/08 (2)
  - RE: Cathode bias methods - Neff 17:10:32 03/30/08 (1)
    - RE: Cathode bias methods - Gingertube 17:16:25 03/30/08 (0)
- RE: Cathode bias methods - Ray Moth 13:51:07 03/30/08 (2)
  - RE: Cathode bias methods - Eli Duttman 17:05:45 03/30/08 (1)
    - RE: Cathode bias methods - Ray Moth 02:54:49 03/31/08 (0)
Any good sources for guitar amp building theory? - LowRedMoon 10:38:22 03/30/08 (19)
- RE: Any good sources for guitar amp building theory? - dadbar 09:09:12 03/31/08 (1)
  - Yes, that is an excellent use for old 80's sold-state amps! (nt) - LowRedMoon 20:10:30 03/31/08 (0)
- RE: Any good sources for guitar amp building theory? - 2wo 19:52:53 03/30/08 (1)
  - Very nice page. Thanks! (nt) - LowRedMoon 22:55:28 03/30/08 (0)
- RE: Any good sources for guitar amp building theory? - LikeWhatG? 17:31:51 03/30/08 (1)
  - I'll check that book out. Thanks! (nt) - LowRedMoon 22:57:12 03/30/08 (0)
- guitar amp theory - Jim Dowdy 16:35:43 03/30/08 (1)
  - RE: guitar amp theory - LowRedMoon 22:54:37 03/30/08 (0)
- RE: Any good sources for guitar amp building theory? - drsx 12:31:39 03/30/08 (4)
  - RE: Any good sources for guitar amp building theory? - LowRedMoon 23:11:42 03/30/08 (3)
    - RE: Any good sources for guitar amp building theory? - mjk 12:00:33 03/31/08 (1)
      - RE: Any good sources for guitar amp building theory? - LikeWhatG? 12:39:47 03/31/08 (0)
    - RE: Any good sources for guitar amp building theory? - drsx 23:46:25 03/30/08 (0)
- none yet - PakProtector 12:13:04 03/30/08 (1)
  - RE: none yet - LowRedMoon 23:38:18 03/30/08 (0)
- RE: Any good sources for guitar amp building theory? - diamondsouled 10:48:53 03/30/08 (3)
  - O'Connor, Jones - - LowRedMoon 23:43:29 03/30/08 (0)
  - RE: Any good sources for guitar amp building theory? - Stewen 13:12:12 03/30/08 (1)
    - RE: Any good sources for guitar amp building theory? - mjk 12:38:22 03/31/08 (0)
IPC AM1026 capacitor values and purpose (pic/schematic) - wpod 09:50:06 03/30/08 (2)
- RE: IPC AM1026 capacitor values and purpose (pic/schematic) - PakProtector 14:51:29 03/30/08 (1)
  - Thank you , Douglas! - wpod 12:36:19 03/31/08 (0)
Kenwood KW-55 circuit rant - Neff 08:12:33 03/30/08 (4)
- RE: Kenwood KW-55 circuit rant - Tom Bavis 10:29:28 03/30/08 (2)
  - RE: Kenwood KW-55 circuit rant - Neff 11:48:19 03/30/08 (1)
    - RE: Kenwood KW-55 circuit rant - Tom Bavis 18:40:09 03/31/08 (0)
- RE: Kenwood KW-55 circuit rant - Eli Duttman 10:00:56 03/30/08 (0)
Can a standard Hammond choke be used for choke input? - bequerel 07:46:11 03/30/08 (7)
- RE: Can a standard Hammond choke be used for choke input? - Pete Millett 08:32:27 03/30/08 (0)
- RE: Can a standard Hammond choke be used for choke input? - sorenj07 08:29:29 03/30/08 (5)
  - So if I'd like to draw a little more than 200mA - limono 16:20:18 03/30/08 (3)
    - RE: So if I'd like to draw a little more than 200mA - Eli Duttman 17:20:44 03/30/08 (2)
      - Thanks Eli -seems like Heyboer custom unit is - limono 18:29:13 03/30/08 (0)
      - Yes - Caucasian Blackplate 17:30:17 03/30/08 (0)
  - Thanks a lot boys :-) - bequerel 08:35:23 03/30/08 (0)
Bias Sweet Spot - How Did I Miss This Tweak? - sayntjack 23:22:29 03/29/08 (0)
Coupling capacitor lead length - LowRedMoon 16:32:59 03/29/08 (5)
- RE: Coupling capacitor lead length - Michael Samra 17:36:39 03/29/08 (4)
  - RE: Coupling capacitor lead length - LowRedMoon 19:31:41 03/29/08 (3)
    - RE: Coupling capacitor lead length - Michael Samra 20:09:31 03/29/08 (2)
      - RE: Coupling capacitor lead length - LowRedMoon 10:26:11 03/30/08 (1)
        
        RE: Coupling capacitor lead length - Michael Samra 14:11:47 03/30/08 (0)
How to measure phono cable capacitance? - tmw57 08:45:06 03/29/08 (3)
- RE: How to measure phono cable capacitance? - JimL 15:15:16 03/29/08 (0)
- RE: How to measure phono cable capacitance? - Steve Eddy 09:24:35 03/29/08 (1)
  - Much thanks! (nt) - tmw57 15:56:56 03/29/08 (0)
Resistor wattage values (please see attached schem) - amos 03:16:00 03/29/08 (6)
- RE: Resistor wattage values (please see attached schem) - Caucasian Blackplate 10:46:31 03/29/08 (0)
- RE: Resistor wattage values (please see attached schem) - Lew 08:39:31 03/29/08 (0)
- RE: Resistor wattage values (please see attached schem) - drlowmu 05:12:18 03/29/08 (3)
  - Ohms Law Chart - diamondsouled 11:43:39 03/29/08 (1)
    - RE: Ohms Law Chart - drlowmu 12:40:53 03/29/08 (0)
  - RE: Resistor wattage values (please see attached schem) - Eli Duttman 08:06:45 03/29/08 (0)