Home / FAQ / News
Classifieds / Events

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Sponsored Links

VH Audio - Cables, Tweaks, Accessories and DIY Parts

Free Classifieds

Marsh P2000t - stltrains

help with power supply - Jim D. 21:04:34 03/28/08 (8)
- RE: help with power supply - Tre' 22:16:00 03/28/08 (3)
  - RE: help with power supply - mikeyb 15:10:02 03/29/08 (0)
  - RE: help with power supply - Eli Duttman 08:24:46 03/29/08 (0)
  - Thanks! (nt) - Jim D. 06:12:25 03/29/08 (0)
- RE: help with power supply - sorenj07 21:31:06 03/28/08 (3)
  - RE: help with power supply - Jim D. 06:11:48 03/29/08 (2)
    - RE: help with power supply - drlowmu 06:35:15 03/29/08 (1)
      - RE: help with power supply - Jim D. 16:36:59 03/29/08 (0)
Rp of rectifier tubes - mikeyb 18:47:55 03/28/08 (114)
- RE: Rp of rectifier tubes - dave slagle 18:11:49 03/29/08 (1)
  - RE: Rp of rectifier tubes - mikeyb 22:01:25 03/29/08 (0)
- RE: Rp of rectifier tubes - tube wrangler 15:19:06 03/29/08 (110)
  - There's nothing like consistency, is there? - Thergit 03:26:55 04/01/08 (3)
    - RE: There's nothing like consistency, is there? - tube wrangler 09:50:22 04/01/08 (2)
      - Thanks, that's clear - Thergit 13:58:37 04/01/08 (1)
        
        RE: Thanks, that's clear - tube wrangler 14:41:36 04/01/08 (0)
  - RE: Rp of rectifier tubes - mikeyb 21:52:07 03/29/08 (104)
    - RE: Rp of rectifier tubes - tube wrangler 23:32:44 03/29/08 (103)
      - so then.... - PakProtector 13:28:32 03/30/08 (0)
      - RE: Rp of rectifier tubes - mikeyb 13:06:22 03/30/08 (2)
        
        RE: Rp of rectifier tubes - drlowmu 17:06:59 03/30/08 (1)
        
        if you don't know... - PakProtector 14:05:38 03/31/08 (0)
      - RE: Rp of rectifier tubes - Tre' 10:49:49 03/30/08 (4)
        
        RE: Rp of rectifier tubes - tube wrangler 14:23:31 03/30/08 (2)
        
        RE: Rp of rectifier tubes - Tre' 16:57:21 03/30/08 (0)
        
        that's a good one... - PakProtector 15:30:59 03/30/08 (0)
        
        RE: Rp of rectifier tubes - sorenj07 13:50:28 03/30/08 (0)
      - RE: Rp of rectifier tubes - mjk 09:47:23 03/30/08 (58)
        
        RE: Rp of rectifier tubes - wrangler 10:45:43 03/30/08 (57)
        
        More unsubstantiated, meaningless fluff (nt) - Henry Pasternack 11:22:08 03/30/08 (56)
        
        So say you ... - Stephen R 11:50:52 03/30/08 (55)
        
        RE: So say you ... - Henry Pasternack 19:49:11 03/30/08 (7)
        
        Searing satirical slash meets - Cleantimestream 19:53:52 03/31/08 (0)
        
        RE: So say you ... - Stephen R 01:09:42 03/31/08 (5)
        
        I'd call it a reality check ... - mikeyb 10:44:33 03/31/08 (2)
        
        RE: I'd call it a reality check ... - tube wrangler 03:03:47 04/02/08 (0)
        
        and 5 is .... - Stephen R 03:55:34 04/01/08 (0)
        
        in an actual discussion - Tre' 09:24:15 03/31/08 (0)
        
        Power Supply Police - Henry Pasternack 09:24:07 03/31/08 (0)
        
        RE: Dennis makes a lot of sense - danlaudionut 18:57:34 03/30/08 (14)
        
        RE: Dennis makes a lot of sense - drlowmu 19:45:15 03/30/08 (13)
        
        RE: Dennis makes a lot of sense - danlaudionut 20:00:54 03/30/08 (12)
        
        Harrassing Posters - drlowmu 22:50:17 03/30/08 (11)
        
        Funny that you should mention Stradivari - mikeyb 08:30:48 03/31/08 (1)
        
        RE: Funny that you should mention Stradivari - drlowmu 15:41:58 03/31/08 (0)
        
        RE: Harrassing Posters - Ray Moth 04:10:19 03/31/08 (0)
        
        RE: Harrassing Posters - danlaudionut 03:15:17 03/31/08 (7)
        
        RE: Harrassing Posters - tube wrangler 10:40:53 03/31/08 (6)
        
        RE: Harrassing Posters - Lew 10:51:16 03/31/08 (5)
        
        RE: Harrassing Posters - tube wrangler 13:25:11 03/31/08 (4)
        
        Thanks - Lew 13:46:24 03/31/08 (3)
        
        RE: Thanks - tube wrangler 15:02:37 03/31/08 (2)
        
        RE: Thanks - Lew 16:35:34 03/31/08 (1)
        
        RE: Thanks - tube wrangler 23:07:32 03/31/08 (0)
        
        RE: So say you ... - tube wrangler 16:32:34 03/30/08 (29)
        
        RE: So say you ...Are you suggesting that unconventional claims go unchallenged in this forum? (nt) - Steve O 17:01:26 03/30/08 (28)
        
        RE: So say you ...Are you suggesting that unconventional claims go unchallenged in this forum? (nt) - tube wrangler 17:41:00 03/30/08 (27)
        
        RE: So say you ...Are you suggesting that unconventional claims go unchallenged in this forum? (nt) - Steve O 17:32:59 03/31/08 (13)
        
        Yes, indeed. - Ray Moth 00:21:22 04/02/08 (0)
        
        RE: So say you ...Are you suggesting that unconventional claims go unchallenged in this forum? (nt) - tube wrangler 23:34:09 03/31/08 (11)
        
        RE: I feel like I've just been slimed with 10,000gal of grandiose technobable... - Steve O 16:43:08 04/01/08 (4)
        
        Steve O - drlowmu 06:55:41 04/02/08 (3)
        
        you have to understand... - PakProtector 12:37:04 04/02/08 (2)
        
        RE: you have to understand... - drlowmu 15:57:04 04/02/08 (1)
        
        RE: you have to understand... - PakProtector 17:43:03 04/02/08 (0)
        
        you forgot, 'invented the Hemi' - PakProtector 13:32:47 04/01/08 (4)
        
        Actually.... - drlowmu 19:48:49 04/01/08 (0)
        
        RE: you forgot, 'invented the Hemi' - tube wrangler 14:50:41 04/01/08 (0)
        
        RE: you forgot, 'invented the Hemi' - Henry Pasternack 14:34:29 04/01/08 (1)
        
        heh-heh-heh... - PakProtector 16:21:46 04/01/08 (0)
        
        I wish this forum had a "sticky" post section... - Henry Pasternack 05:55:15 04/01/08 (0)
        
        go right ahead...:) - PakProtector 14:40:24 03/31/08 (12)
        
        Done Deal............ - drlowmu 14:29:50 04/01/08 (11)
        
        you already said it wouldn't work - PakProtector 14:38:37 04/01/08 (10)
        
        Re-visit time !! - tube wrangler 15:41:14 04/01/08 (9)
        
        Are drlowmu and tubewrangler one and the same? - mikeyb 18:52:06 04/01/08 (5)
        
        RE: Are drlowmu and tubewrangler one and the same? - drlowmu 20:23:15 04/01/08 (0)
        
        Isn't that interesting. - Tre' 18:57:27 04/01/08 (3)
        
        CSI on the asylum - mikeyb 06:42:33 04/02/08 (2)
        
        RE: CSI on the asylum - Tre' 09:44:47 04/02/08 (1)
        
        Fooled you! - mikeyb 10:11:18 04/02/08 (0)
        
        RE: Re-visit time !! - PakProtector 16:26:05 04/01/08 (2)
        
        RE: Re-visit time !! - drlowmu 20:05:57 04/01/08 (1)
        
        I'll wait for Dennis - PakProtector 12:38:39 04/02/08 (0)
        
        the difference being - PakProtector 14:26:57 03/30/08 (1)
        
        Great point. Thanks (nt) - Tre' 17:05:20 03/30/08 (0)
      - RE: Rp of rectifier tubes - Pär 06:07:55 03/30/08 (34)
        
        RE: Rp of rectifier tubes - Henry Pasternack 06:57:27 03/30/08 (33)
        
        RE: Rp of rectifier tubes - tube wrangler 09:31:00 03/30/08 (32)
        
        Sounds like a Used Car Salesman (nt) - danlaudionut 12:10:07 03/30/08 (2)
        
        nah...expensive tube amp salesman - PakProtector 13:31:42 03/30/08 (1)
        
        RE: nah...expensive tube amp salesman - drlowmu 14:37:20 04/01/08 (0)
        
        RE: Rp of rectifier tubes - Henry Pasternack 11:18:42 03/30/08 (28)
        
        RE: Rp of rectifier tubes - tube wrangler 14:50:25 03/30/08 (27)
        
        NOW LOOK HERE DENNIS - Tre' 17:22:50 03/30/08 (26)
        
        RE: NOW LOOK HERE DENNIS - drlowmu 18:23:10 03/30/08 (1)
        
        Jeff, you changed the subject. - Tre' 21:33:10 03/30/08 (0)
        
        RE: NOW LOOK HERE DENNIS - tube wrangler 17:34:44 03/30/08 (23)
        
        "I already answered this" When? - Tre' 17:44:43 03/30/08 (22)
        
        RE: "I already answered this" When? - drlowmu 18:36:44 03/30/08 (21)
        
        RE: "I already answered this" When? - Tre' 21:22:53 03/30/08 (20)
        
        RE: "I already answered this" When? - tube wrangler 00:39:55 03/31/08 (19)
        
        RE: "I already answered this" When? - Tre' 09:18:13 03/31/08 (18)
        
        One more question - Tre' 22:19:05 03/31/08 (17)
        
        RE: One more question - dave slagle 08:49:55 04/01/08 (11)
        
        RE: One more question - Stephen R 10:20:13 04/01/08 (8)
        
        RE: One more question - Ray Moth 00:45:54 04/02/08 (0)
        
        RE: One more question - Henry Pasternack 13:24:36 04/01/08 (0)
        
        RE: One more question - tube wrangler 13:19:16 04/01/08 (2)
        
        Some questions - Caucasian Blackplate 13:54:43 04/03/08 (1)
        
        RE: Some questions - tube wrangler 23:06:23 04/03/08 (0)
        
        RE: One more question - Tre' 13:18:53 04/01/08 (2)
        
        RE: One more question - tube wrangler 13:33:07 04/01/08 (1)
        
        Yes, it does. - Tre' 14:42:28 04/01/08 (0)
        
        RE: One more question - Henry Pasternack 08:54:53 04/01/08 (1)
        
        touché - mikeyb 10:28:08 04/01/08 (0)
        
        I believe Dennis would tell you... - Henry Pasternack 05:51:25 04/01/08 (4)
        
        RE: I believe Dennis would tell you... - tube wrangler 10:05:08 04/01/08 (3)
        
        RE: I believe Dennis would tell you... - Henry Pasternack 14:32:46 04/01/08 (0)
        
        RE: I believe Dennis would tell you... - Tre' 10:19:51 04/01/08 (1)
        
        RE: I believe Dennis would tell you... - tube wrangler 13:47:06 04/01/08 (0)
  - RE: Rp of rectifier tubes - slownlo 16:54:41 03/29/08 (0)
- RE: Rp of rectifier tubes - TimFox 11:17:37 03/29/08 (0)
Will this work? - G 13:30:06 03/28/08 (11)
- RE: Will this work? - gluca 15:07:42 03/28/08 (10)
  - RE: Will this work? - kyle 19:17:14 03/31/08 (0)
  - RE: Will this work? - G 16:03:02 03/28/08 (8)
    - RE: Will this work? - gluca 16:21:24 03/28/08 (7)
      - RE: Will this work? - G 16:44:14 03/28/08 (6)
        
        parafeed calculator - gluca 17:03:24 03/28/08 (5)
        
        RE: parafeed calculator - G 17:45:32 03/28/08 (4)
        
        RE: parafeed calculator - gluca 00:41:29 03/29/08 (3)
        
        RE: parafeed calculator - G 09:18:17 03/29/08 (2)
        
        RE: parafeed calculator - gluca 09:41:12 03/29/08 (1)
        
        RE: parafeed calculator - G 10:07:47 03/29/08 (0)
seperate supply: driver or driver screen? - guest 07:56:04 03/28/08 (1)
- RE: seperate supply: driver or driver screen? - Michael Samra 11:23:22 03/28/08 (0)
leaky vintage couplers - shane_c 00:50:14 03/28/08 (5)
- RE: leaky vintage couplers - Michael Samra 02:26:27 03/28/08 (4)
  - RE: leaky vintage couplers - . 11:12:31 03/28/08 (3)
    - RE: leaky vintage couplers - Michael Samra 13:49:37 03/28/08 (2)
      - RE: leaky vintage couplers - shane_c 17:25:08 03/28/08 (1)
        
        RE: leaky vintage couplers - Michael Samra 19:56:41 03/28/08 (0)
Choke input works best on ESLs - Michael Samra 00:22:36 03/28/08 (4)
- Choke input works best on everything! (nt) - Allen Wright 08:21:31 03/28/08 (3)
  - RE: Choke input works best on everything! (nt) - Michael Samra 10:57:11 03/28/08 (0)
  - RE: Choke input works best on everything! (nt) - sorenj07 09:01:11 03/28/08 (1)
    - RE: Choke input works best on everything! (nt) - Michael Samra 11:00:26 03/28/08 (0)
Anyone an expert on Lionel trains ? Questions on modifing electric motor... - AdamC 09:51:55 03/27/08 (5)
- RE: this should work... - lionelexpert 13:30:14 03/27/08 (0)
- RE: Anyone an expert on Lionel trains ? Questions on modifing electric motor... - danlaudionut 10:38:13 03/27/08 (3)
  - RE: Anyone an expert on Lionel trains ? Questions on modifing electric motor... - tubewade 12:12:39 03/27/08 (2)
    - RE: Anyone an expert on Lionel trains ? Questions on modifing electric motor... - Door Nail 14:58:02 03/27/08 (0)
    - RE: Anyone an expert on Lionel trains ? Questions on modifing electric motor... - danlaudionut 14:25:34 03/27/08 (0)
Recommended repairer for Jadis amp in Sydney - JohnL 05:24:09 03/27/08 (1)
- Yes. Joe Rasmusen - Allen Wright 08:22:03 03/27/08 (0)
Is anyone else having trouble with the asylum running very slow? - Vinnie 03:26:01 03/27/08 (5)
- RE: Is anyone else having trouble with the asylum running very slow? - cpbajan 08:03:30 03/27/08 (2)
  - RE: Is anyone else having trouble with the asylum running very slow? - Vinnie 18:29:29 03/27/08 (1)
    - RE: Is anyone else having trouble with the asylum running very slow? - cpbajan 08:06:20 03/28/08 (0)
- RE: Is anyone else having trouble with the asylum running very slow? - . 06:04:07 03/27/08 (0)
- RE: Is anyone else having trouble with the asylum running very slow? - reb 05:07:56 03/27/08 (0)
?? about REFERENCE VOLTAGE - grhughes 12:12:15 03/26/08 (7)
- Temperature stability of reference voltage - Mark Kelly 06:01:45 03/27/08 (1)
  - Thanks Mark! - grhughes 09:00:16 03/27/08 (0)
- RE: ?? about REFERENCE VOLTAGE - Ray Moth 13:28:06 03/26/08 (4)
  - RE: ?? about REFERENCE VOLTAGE - TimFox 11:23:58 03/29/08 (0)
  - RE: ?? about REFERENCE VOLTAGE - grhughes 13:39:56 03/26/08 (2)
    - RE: ?? about REFERENCE VOLTAGE - Eli Duttman 14:02:22 03/26/08 (1)
      - Thanks Eli! - grhughes 14:17:43 03/26/08 (0)
my k-40 experiment has begun. - reb 11:33:35 03/26/08 (0)
My messy area wth the ESLS thats now cleaned up - Michael Samra 01:08:07 03/26/08 (17)
- Speakers - Neff 15:33:04 03/28/08 (2)
  - I almost forgot. - Michael Samra 17:49:59 03/29/08 (0)
  - RE: Speakers - Michael Samra 17:45:08 03/29/08 (0)
- I hope nobody got hurt; probably never be found (nt) - wheezer 11:12:18 03/27/08 (1)
  - RE: I hope nobody got hurt; probably never be found (nt) - Michael Samra 12:08:19 03/27/08 (0)
- You need to have a yardsale dude....nt - slownlo 08:47:06 03/26/08 (0)
- "Cleaned up" what? Still a messy hardware junkyard! - cheap-Jack 07:38:23 03/26/08 (9)
  - RE: "Cleaned up" what? Still a messy hardware junkyard! - Michael Samra 11:15:45 03/26/08 (7)
    - So you're a sonic 'purist' to love ELS panels so much. (nt) - cheap-Jack 13:06:07 03/26/08 (6)
      - RE: So you're a sonic 'purist' to love ELS panels so much. (nt) - Michael Samra 13:48:30 03/26/08 (5)
        
        RE: So you're a sonic 'purist' to love ELS panels so much. (nt) - Tre' 14:34:36 03/26/08 (4)
        
        yes, sorta like a musical instrument )smile( NT - Cleantimestream 07:11:23 03/27/08 (2)
        
        Yes, you reminded me Audio Note loudspeakers. - cheap-Jack 08:43:09 03/27/08 (1)
        
        RE: Yes, you reminded me Audio Note loudspeakers. - Michael Samra 12:09:48 03/27/08 (0)
        
        RE: So you're a sonic 'purist' to love ELS panels so much. (nt) - Michael Samra 19:01:06 03/26/08 (0)
  - Nothing a few Russian PIO can not handle (nt) - KIS 09:47:15 03/26/08 (0)
- Is this the "after" shot? (nt) - Chris O 07:19:53 03/26/08 (0)
Heyboer and audionote and hammond and magnequest - Michael Samra 23:21:22 03/25/08 (3)
- looks identical - unclestu52 23:50:38 03/25/08 (2)
  - RE: looks identical - Michael Samra 00:55:42 03/26/08 (1)
    - RE: looks identical - unclestu52 02:41:22 03/26/08 (0)
These are excellent amps to McShane - Michael Samra 21:50:39 03/25/08 (20)
- I judge the performance quality of many tube amps - Michael Samra 21:18:49 03/26/08 (0)
- RE: These are excellent amps - Neff 16:25:21 03/26/08 (1)
  - RE: These are excellent amps - Michael Samra 19:04:30 03/26/08 (0)
- I assume that 'McShane' is a verb in the post title, then? :-) (nt) - mhardy6647 03:30:40 03/26/08 (3)
  - RE: I assume that 'McShane' is a verb in the post title, then? :-) (nt) - Michael Samra 11:32:51 03/26/08 (2)
    - as long as they're not "too McShane" :-) (nt) - mhardy6647 12:19:53 03/26/08 (1)
      - RE: as long as they're not "too McShane" :-) (nt) - Jim McShane 12:32:42 03/26/08 (0)
- Allen - unclestu52 02:47:42 03/26/08 (4)
  - RE: Allen - Michael Samra 11:19:05 03/26/08 (3)
    - Legend Has It Allen Used Acro Trannies... - Interstage Tranny 18:27:33 03/26/08 (2)
      - RE: Legend Has It Allen Used Acro Trannies... - Michael Samra 21:10:24 03/26/08 (0)
      - RE: Legend Has It Allen Used Acro Trannies... - unclestu52 20:47:40 03/26/08 (0)
- RE: These are excellent amps to McShane - lovetube 22:31:56 03/25/08 (7)
  - RE: These are excellent amps to McShane - corerosin 23:09:39 03/25/08 (6)
    - RE: These are excellent amps to McShane - Michael Samra 23:18:40 03/25/08 (5)
      - RE: These are excellent amps to McShane - LineArrayNut 14:18:29 03/26/08 (4)
        
        RE: These are excellent amps to McShane - Michael Samra 21:11:16 03/26/08 (3)
        
        Webster Type 23626-1 - LineArrayNut 06:29:30 03/27/08 (2)
        
        RE: Webster Type 23626-1 - Michael Samra 12:16:18 03/27/08 (1)
        
        RE: Webster Type 23626-1 - LineArrayNut 14:19:38 03/27/08 (0)
Tweaking those vintage Receivers from Japan - Neff 18:59:01 03/25/08 (7)
- RE: Tweaking those vintage Receivers from Japan - Michael Samra 21:33:56 03/25/08 (6)
  - Michael: Sansui 1000A vs Sherwood 8000 series - Neff 19:23:53 03/26/08 (2)
    - RE: Michael: Sansui 1000A vs Sherwood 8000 series - Michael Samra 20:55:11 03/26/08 (1)
      - Much appreciated..........nt - Neff 16:39:11 03/27/08 (0)
  - RE: Tweaking those vintage Receivers from Japan - Eli Duttman 08:25:25 03/26/08 (2)
    - RE: Tweaking those vintage Receivers from Japan - Michael Samra 13:56:21 03/26/08 (1)
      - RE: Tweaking those vintage Receivers from Japan - Eli Duttman 19:10:30 03/26/08 (0)
300b Billington Gold - J.Jazz 15:22:03 03/25/08 (3)
- For the same money you should be able to get... - Allen Wright 03:42:01 03/26/08 (1)
  - RE: For the same money you should be able to get... - Michael Samra 02:20:11 03/27/08 (0)
- Here's a post ... - danlaudionut 15:44:08 03/25/08 (0)
What's the difference between choke loading a tube's plate and the primary of an output transformer? - Iczerman 15:11:46 03/25/08 (4)
- RE: What's the difference between choke loading a tube's plate and the primary of an output transformer? - danlaudionut 15:38:15 03/25/08 (3)
  - RE: What's the difference between choke loading a tube's plate and the primary of an output transformer? - Iczerman 08:55:14 03/26/08 (2)
    - RE: What's the difference between choke loading a tube's plate and the primary of an output transformer? - danlaudionut 09:06:50 03/26/08 (1)
      - RE: What's the difference between choke loading a tube's plate and the primary of an output transformer? - Iczerman 12:12:20 03/26/08 (0)
Pentode as a simple CCS - Tre' 14:09:59 03/25/08 (12)
- RE: Pentode as a simple CCS - Pär 13:53:05 03/26/08 (1)
  - RE: Pentode as a simple CCS - Tre' 14:18:34 03/26/08 (0)
- Thanks all - Tre' 13:05:45 03/26/08 (2)
  - RE: Thanks all - Eli Duttman 13:47:29 03/26/08 (1)
    - RE: Thanks all - Tre' 14:21:51 03/26/08 (0)
- RE: Pentode as a simple CCS - twystd 20:51:10 03/25/08 (0)
- RE: Pentode as a simple CCS - Eli Duttman 17:20:23 03/25/08 (3)
  - Almost ... - danlaudionut 18:50:20 03/25/08 (2)
    - RE: Almost ... - Eli Duttman 08:12:42 03/26/08 (1)
      - Yes, as a current sink - Tre' 14:24:01 03/26/08 (0)
- RE: Pentode as a simple CCS - PakProtector 15:57:02 03/25/08 (0)
- RE: Pentode as a simple CCS - danlaudionut 14:53:20 03/25/08 (0)
Magnetic Resistors Update - Steve O 14:04:47 03/25/08 (1)
- RE: Magnetic Resistors Update - Eli Duttman 20:28:05 03/25/08 (0)
Building the RCA RIAA pre-amp circuit with 12AX7 - Brian C. 10:54:07 03/25/08 (8)
- Thanks chaps but.... - Brian C. 03:53:31 03/26/08 (2)
  - RE: Thanks chaps but.... - Eli Duttman 08:00:59 03/26/08 (1)
    - Thank you Eli - Brian C. 08:13:56 03/26/08 (0)
- Why don't you research the literature on the web.... - grhughes 14:28:38 03/25/08 (0)
- RE: Building the RCA RIAA pre-amp circuit with 12AX7 - shermanr@prw.net 13:01:44 03/25/08 (1)
  - RE: Building the RCA RIAA pre-amp circuit with 12AX7 - Brian C. 03:56:07 03/26/08 (0)
- RE: Building the RCA RIAA pre-amp circuit with 12AX7 - Caucasian Blackplate 12:59:16 03/25/08 (0)
- You could, but there are better designs out there - richardl 12:44:19 03/25/08 (0)
The ESLs and Horns are two speaker systems - Michael Samra 21:45:49 03/24/08 (21)
- You can try my Iron Chef speaker set up protocol - tubesforever 00:01:43 03/28/08 (1)
  - RE: You can try my Iron Chef speaker set up protocol - Michael Samra 17:46:56 03/29/08 (0)
- RE: The ESLs and Horns are two speaker systems - Naz 23:13:55 03/24/08 (18)
  - Naz...My mistake.. - Michael Samra 01:58:18 03/25/08 (17)
    - What do you mean by "acoustical ceiling"? - cheap-Jack 07:48:40 03/25/08 (1)
      - RE: What do you mean by "acoustical ceiling"? - Michael Samra 11:25:36 03/25/08 (0)
    - Cool, that should work well ... - Naz 03:13:32 03/25/08 (14)
      - RE: Cool, that should work well ... - Lew 06:53:58 03/25/08 (13)
        
        Ah, room equalizers ... - Naz 15:44:01 03/25/08 (1)
        
        My one experience - Lew 10:46:33 03/26/08 (0)
        
        Lew,Naz,and Jack. - Michael Samra 11:33:20 03/25/08 (10)
        
        Indeed, matching is key word for hybriding ELS. - cheap-Jack 12:56:43 03/25/08 (9)
        
        RE: Indeed, matching is key word for hybriding ELS. - Michael Samra 13:22:35 03/25/08 (8)
        
        Waaayyy off topic for this site, but... - Lew 14:45:19 03/25/08 (7)
        
        RE: Waaayyy off topic for this site, but... - Michael Samra 15:36:02 03/25/08 (6)
        
        RE: Waaayyy off topic for this site, but... - Naz 15:53:40 03/25/08 (5)
        
        RE: Waaayyy off topic for this site, but... - Michael Samra 17:31:29 03/25/08 (4)
        
        Big room? - Lew 08:46:04 03/26/08 (1)
        
        RE: Big room? - Michael Samra 22:36:13 03/26/08 (0)
        
        Xover from ESL to Mid Bass is 180Hz and to Subs at 50Hz (nt) - Naz 18:07:00 03/25/08 (1)
        
        RE: Xover from ESL to Mid Bass is 180Hz and to Subs at 50Hz (nt) - Michael Samra 18:46:00 03/25/08 (0)
Got the Octal Cornet Assembled - danlaudionut 15:29:14 03/24/08 (2)
- RE: Got the Octal Cornet Assembled - lovetube 02:56:43 03/25/08 (0)
- There be music - danlaudionut 16:02:45 03/24/08 (0)
Compactron Question - Caucasian Blackplate 14:22:08 03/24/08 (6)
- RE: Compactron Question - tubewade 15:33:02 03/25/08 (0)
- RE: Compactron Question - Ian L 12:51:00 03/25/08 (2)
  - Ahhh nuts ! - Ian L 18:50:57 03/25/08 (1)
    - Thanks! - Caucasian Blackplate 14:16:33 03/26/08 (0)
- GE Essential Characteristics book - elektron 15:06:19 03/24/08 (0)
- RE: Compactron Question - Big Harry 14:48:16 03/24/08 (0)
What components..... - Awe-d-o-file 11:34:26 03/24/08 (4)
- RE: What components..... - Francois G 13:04:43 03/24/08 (3)
  - RE: What components..... - Awe-d-o-file 15:47:08 03/24/08 (2)
    - RE: What components..... - Ron Oehlert 08:25:58 03/25/08 (1)
      - RE: What components..... - Awe-d-o-file 12:26:21 03/25/08 (0)
distinguishing unlabeled rosin core from acid core solder - johnny 11:08:48 03/24/08 (5)
- RE: distinguishing unlabeled rosin core from acid core solder - Poindexter 21:19:02 03/24/08 (0)
- RE: distinguishing unlabeled rosin core from acid core solder - Chris O 11:58:42 03/24/08 (3)
  - RE: distinguishing unlabeled rosin core from acid core solder - mjk 15:10:46 03/24/08 (2)
    - RE: distinguishing unlabeled rosin core from acid core solder - corerosin 07:59:12 03/25/08 (1)
      - RE: distinguishing unlabeled rosin core from acid core solder - mjk 10:38:25 03/25/08 (0)
Tube Rectifier....this new one should do the job well.....see pix - drlowmu 09:33:26 03/24/08 (26)
- RE: Tube Rectifier....this new one should do the job well.....see pix - Story 12:52:01 03/24/08 (23)
  - RE: Tube Rectifier....this new one should do the job well.....see pix - ducati-guy 11:11:32 03/30/08 (2)
    - RE: Tube Rectifier....this new one should do the job well.....see pix - tube wrangler 01:06:20 03/31/08 (1)
      - RE: Tube Rectifier....this new one should do the job well.....see pix - ducati-guy 05:41:31 03/31/08 (0)
  - Similar to a U4GB - Caucasian Blackplate 14:02:39 03/24/08 (18)
    - Costs - drlowmu 18:26:38 03/24/08 (15)
      - RE: Costs - dave slagle 18:42:24 03/24/08 (13)
        
        RE: Costs - tube wrangler 23:31:25 03/24/08 (12)
        
        RE: Costs - dave slagle 05:28:32 03/25/08 (11)
        
        RE: Costs - tube wrangler 23:12:50 03/25/08 (8)
        
        bypass cap - ecir38 10:27:39 04/03/08 (0)
        
        RE: Costs - ducati_guy 11:11:26 03/26/08 (6)
        
        CL-80 or CL-90 - drlowmu 15:40:04 03/26/08 (2)
        
        RE: CL-80 or CL-90 - ecir38 18:41:37 03/26/08 (1)
        
        RE: CL-80 or CL-90 - drlowmu 20:14:43 03/26/08 (0)
        
        RE: Costs - dave slagle 15:04:22 03/26/08 (1)
        
        RE: Costs - PakProtector 14:15:49 03/29/08 (0)
        
        RE: Costs - tube wrangler 12:15:23 03/26/08 (0)
        
        RE: Costs - mach1 16:31:13 03/25/08 (1)
        
        RE: Costs - drlowmu 19:04:58 03/25/08 (0)
      - dual 5U4's - Caucasian Blackplate 18:28:02 03/24/08 (0)
    - site says NOT equal to a 5U4GA or GB, only 5U4G... - LineArrayNut 17:48:57 03/24/08 (1)
      - drastic overstatement - Caucasian Blackplate 17:58:59 03/24/08 (0)
  - RE: Tube Rectifier....this new one should do the job well.....see pix - drlowmu 13:03:47 03/24/08 (0)
- RE: Tube Rectifier....this new one should do the job well.....see pix - somejoe 10:22:19 03/24/08 (1)
  - RE: Tube Rectifier....this new one should do the job well.....see pix - Vatron 13:59:25 03/24/08 (0)
K40Y-9 Wooooooooooooowww......... - iamthanik@hotmail.com 03:59:13 03/24/08 (9)
- RE: K40Y-9 Wooooooooooooowww......... - becketma@yahoo.com 13:59:51 03/24/08 (0)
- Why thanks imathink. - Michael Samra 04:30:48 03/24/08 (7)
  - RE: I think its time to put the capacitor flavors into perspective......... - reb 04:56:11 03/24/08 (6)
    - RE: I think its time to put the capacitor flavors into perspective......... - iamthanik@hotmail.com 06:13:34 03/24/08 (4)
      - This thought always brings me back to my favorite publication on subjective reasoning and here it is. - Michael Samra 12:25:06 03/24/08 (3)
        
        Flavors in perspective - Dave Garretson 17:42:43 03/24/08 (0)
        
        You should ALWAYS give the source. nt. - Story 12:49:33 03/24/08 (1)
        
        RE: You should ALWAYS give the source. nt. - Michael Samra 15:48:31 03/24/08 (0)
    - RE: I think its time to put the capacitor flavors into perspective......... - danlaudionut 05:48:14 03/24/08 (0)
Which bolts...what does 4-40x1/4 mean?? - Balle Clorin 03:12:21 03/24/08 (7)
- RE: Which bolts...what does 4-40x1/4 mean?? - 2wo 14:11:09 03/24/08 (0)
- RE: Which bolts...what does 4-40x1/4 mean?? - Door Nail 08:41:08 03/24/08 (0)
- RE: Which bolts...what does 4-40x1/4 mean?? - nicolas 05:02:32 03/24/08 (3)
  - Picture of what I try to acheive.. - Balle Clorin 07:56:35 03/24/08 (2)
    - RE: Picture of what I try to acheive.. - Caucasian Blackplate 10:56:56 03/24/08 (0)
    - RE: Picture of what I try to acheive.. - nicolas 08:12:51 03/24/08 (0)
- RE: Which bolts...what does 4-40x1/4 mean?? - danlaudionut 04:33:09 03/24/08 (0)
MK III Layout As It Should Have Been - sayntjack 16:06:19 03/23/08 (32)
- RE: MK III Layout As It Should Have Been - HandyAndy 21:14:23 03/25/08 (0)
- Brown is beautiful - kstagger 06:56:49 03/24/08 (1)
  - RE: Brown is beautiful - sayntjack 18:19:40 03/24/08 (0)
- RE: MK III Layout As It Should Have Been - drlowmu 22:47:18 03/23/08 (0)
- RE: MK III Layout As It Should Have Been - Michael Samra 17:05:14 03/23/08 (2)
  - RE: MK III Layout As It Should Have Been - sayntjack 23:02:41 03/23/08 (1)
    - RE: MK III Layout As It Should Have Been - Michael Samra 23:52:55 03/23/08 (0)
- Nice, here are mine with Solens - Caucasian Blackplate 16:46:57 03/23/08 (2)
  - RE: Nice, here are mine with Solens - caffeinator 09:05:35 03/24/08 (1)
    - Yeah - Caucasian Blackplate 10:54:48 03/24/08 (0)
- RE: MK III Layout As It Should Have Been - Chris O 16:19:57 03/23/08 (19)
  - RE: MK III Layout As It Should Have Been - drlowmu 22:51:41 03/23/08 (18)
    - RE: MK III Layout As It Should Have Been - Ray Moth 13:44:32 03/26/08 (17)
      - RE: MK III Layout As It Should Have Been - tube wrangler 16:51:15 03/26/08 (16)
        
        RE: MK III Layout As It Should Have Been - gusser 17:45:08 03/26/08 (15)
        
        RE: MK III Layout As It Should Have Been - tube wrangler 22:50:49 03/26/08 (14)
        
        RE: MK III Layout As It Should Have Been - Ray Moth 19:27:13 03/27/08 (3)
        
        RE: MK III Layout As It Should Have Been ...(long) - drlowmu 22:09:43 03/27/08 (2)
        
        RE: MK III Layout As It Should Have Been ...(long) - Ray Moth 02:50:48 03/28/08 (1)
        
        RE: MK III Layout As It Should Have Been ...(long) - drlowmu 17:35:15 03/28/08 (0)
        
        RE: MK III Layout As It Should Have Been - gusser 11:55:24 03/27/08 (9)
        
        RE: MK III Layout As It Should Have Been - tube wrangler 23:28:31 03/27/08 (8)
        
        Just one question? - gusser 11:15:58 03/28/08 (7)
        
        Question Your Hypothesis............ - drlowmu 11:38:26 03/28/08 (6)
        
        RE: Question Your Hypothesis............ - gusser 12:05:39 03/28/08 (5)
        
        Weekend Tinkering ??........... - drlowmu 14:12:53 03/28/08 (4)
        
        Yet another mentor? - gusser 14:54:35 03/28/08 (3)
        
        RE: Yet another mentor? - drlowmu 15:42:20 03/28/08 (2)
        
        RE: Yet another mentor? - gusser 15:55:32 03/28/08 (1)
        
        RE: Yet another mentor? - Ray Moth 17:31:40 03/28/08 (0)
- Beautiful... - Bas Horneman 16:15:09 03/23/08 (1)
  - Solen - Neff 19:21:53 03/24/08 (0)
Audible Illusion M3a owners... who has done mods to theirs? - rich121 16:02:53 03/23/08 (0)
Plate Choke calculation - swordsman 14:03:19 03/23/08 (9)
- RE: Plate Choke calculation - swordsman 12:16:45 03/24/08 (0)
- RE: Plate Choke calculation - Ian L 16:38:06 03/23/08 (0)
- RE: Plate Choke calculation - sser2 15:27:11 03/23/08 (6)
  - RE: Plate Choke calculation - dave slagle 17:48:26 03/23/08 (5)
    - If we are talking about contribution of AC and DC to core saturation, - sser2 21:57:32 03/23/08 (4)
      - RE: If we are talking about contribution of AC and DC to core saturation, - dave slagle 05:20:15 03/24/08 (3)
        
        RE: If we are talking about contribution of AC and DC to core saturation, - sser2 09:05:47 03/24/08 (2)
        
        RE: If we are talking about contribution of AC and DC to core saturation, - mjk 11:41:10 03/25/08 (0)
        
        RE: If we are talking about contribution of AC and DC to core saturation, - dave slagle 09:48:56 03/24/08 (0)
Quicksilver SET Mono Amplifier - Jeff Davison 13:24:30 03/23/08 (7)
- There is NO SUCH THING AS A SCHEMATIC from Quicksilver!! - Michael Samra 23:11:06 03/24/08 (0)
- RE: Quicksilver SET Mono Amplifier (NT) - Pär 01:01:06 03/24/08 (3)
  - RE: Quicksilver SET Mono Amplifier (NT) - Jeff Davison 11:41:07 03/24/08 (2)
    - RE: Quicksilver schematics - unclesatu52 21:27:15 03/24/08 (1)
      - RE: Quicksilver schematics - Jeff Davison 21:36:51 03/24/08 (0)
- Michael Sanders from Quicksilver? )NT( - Cleantimestream 18:52:22 03/23/08 (1)
  - RE: Michael Sanders from Quicksilver? )NT( - Jeff Davison 19:51:13 03/23/08 (0)
Octal Cornet Build - danlaudionut 09:59:52 03/23/08 (4)
- RE: Octal Cornet Build - SteveBrown 06:22:33 03/24/08 (1)
  - RE: Octal Cornet Build - danlaudionut 09:00:35 03/24/08 (0)
- RE: Octal Cornet Build - tubewade 13:52:04 03/23/08 (0)
- RE: Octal Cornet Build - DonnG 13:01:20 03/23/08 (0)
where to find high quality small value caps - tmw57 08:56:59 03/23/08 (8)
- RE: where to find high quality small value caps - Andy Nehan 10:18:31 03/24/08 (0)
- RE: where to find high quality small value caps - TimFox 09:34:41 03/23/08 (0)
- RE: where to find high quality small value caps - Slick 09:28:06 03/23/08 (2)
  - RE: check the leads on the recent production RTE caps for ferous content - reb 16:18:51 03/23/08 (1)
    - Please: Which Vendor Stocks Non-Ferrous? - Slick 16:36:55 03/23/08 (0)
- Polystyrene are theroretically great, but... - Allen Wright 09:08:24 03/23/08 (2)
  - Mouser... - nerdorama 10:15:26 03/23/08 (1)
    - RE: Mouser... - tmw57 15:09:15 03/23/08 (0)
Are all Vitamin Q the same? - Neff 05:50:31 03/23/08 (8)
- RE: Are all Vitamin Q the same? - diamondsouled 11:45:20 03/23/08 (2)
  - History of Sprague-Dearborn - diamondsouled 11:52:24 03/23/08 (1)
    - CSC = Commonwealth Sprague Capacitor Inc. - diamondsouled 12:26:12 03/23/08 (0)
- RE: Are all Vitamin Q the same? - iamthanik@hotmail.com 08:02:20 03/23/08 (4)
  - RE: Are all Vitamin Q the same? - Michael Samra 08:31:54 03/23/08 (0)
  - RE: Are all Vitamin Q the same? - Michael Samra 08:24:53 03/23/08 (2)
    - Thanks Michael - Neff 08:38:37 03/23/08 (1)
      - RE: Thanks Michael - Michael Samra 10:26:04 03/23/08 (0)
The 'Visconol' caps throughout all the OEM Leak St. amps I've owned - Timbo in Oz 19:46:04 03/22/08 (2)
- RE: The 'Visconol' caps throughout all the OEM Leak St. amps I've owned - Michael Samra 23:20:42 03/22/08 (1)
  - I run 600V MKP and MKStyrene, the PSU is a bridge of soft recovery big diodes into three 470uf 400V Nichis. - Timbo in Oz 21:37:06 03/23/08 (0)
Question for Welborne DRD 300B owners.. Capacitor Voltage rating - Balle Clorin 13:13:34 03/22/08 (8)
- RE: Question for Welborne DRD 300B owners.. Capacitor Voltage rating - kirbyt 16:57:30 03/22/08 (0)
- What are the other resistor values in the circuit? - somejoe 13:29:59 03/22/08 (3)
  - RE: What are the other resistor values in the circuit? - Balle Clorin 15:11:14 03/22/08 (2)
    - Voltage across cap... - somejoe 17:09:05 03/22/08 (1)
      - RE: Voltage across cap... - danlaudionut 18:28:41 03/22/08 (0)
- RE: Question for Welborne DRD 300B owners.. Capacitor Voltage rating - Caucasian Blackplate 13:17:12 03/22/08 (1)
  - Talk about instant responce!! many thanks, Yes it is 330VAC(nt) - Balle Clorin 13:20:31 03/22/08 (0)
- RE: Question for Welborne DRD 300B owners.. Capacitor Voltage rating - sorenj07 13:15:39 03/22/08 (0)
As I dove deeper into the K40 here is what I found. - Michael Samra 01:03:34 03/22/08 (29)
- eBay - ecir38 19:52:51 03/26/08 (1)
  - RE: eBay - Jeff V. 08:23:22 03/27/08 (0)
- is that paper shown in the photo? - Plinko 08:58:11 03/23/08 (4)
  - RE: is that paper shown in the photo? - Michael Samra 11:17:42 03/23/08 (3)
    - Duly noted....thanks. nfm - Plinko 15:39:36 03/25/08 (0)
    - RE: is that paper shown in the photo? - reb 16:15:35 03/23/08 (1)
      - RE: is that paper shown in the photo? - Michael Samra 19:31:35 03/24/08 (0)
- RE: As I dove deeper into the K40 here is what I found. - Lowrider 01:51:06 03/23/08 (7)
  - RE: As I dove deeper into the K40 here is what I found. - Michael Samra 08:28:58 03/23/08 (6)
    - Ordered a bunch of FT-3 from ebay, couldnt resist... - Lowrider 00:57:12 03/24/08 (2)
      - RE: Ordered a bunch of FT-3 from ebay, couldnt resist... - Michael Samra 04:34:03 03/24/08 (1)
        
        RE: Ordered a bunch of FT-3 from ebay, couldnt resist... - Lowrider 04:43:07 03/24/08 (0)
    - K75 are the best for power supply use. - sser2 12:41:32 03/23/08 (1)
      - RE: K75 are the best for power supply use. - Lowrider 01:04:43 03/24/08 (0)
    - RE: As I dove deeper into the K40 here is what I found. - Lowrider 08:37:59 03/23/08 (0)
- It only looks like copper. - sser2 13:33:01 03/22/08 (1)
  - RE: It only looks like copper. - Michael Samra 18:59:29 03/22/08 (0)
- In spite of that the Sprague Vitamin Q's sound a lot better to me.... - tubesforever 10:04:30 03/22/08 (11)
  - FT-3 bypass - Dave Garretson 09:11:14 03/23/08 (1)
    - RE: FT-3 bypass - sser2 12:58:34 03/23/08 (0)
  - RE: In spite of that the Sprague Vitamin Q's sound a lot better to me.... - reb 13:18:07 03/22/08 (2)
    - Thanks Reb....do you think the K-43 are the same sonically? - tubesforever 14:48:18 03/22/08 (1)
      - RE: Thanks Reb....do you think the K-43 are the same sonically? - Michael Samra 19:34:23 03/22/08 (0)
  - RE: In spite of that the Sprague Vitamin Q's sound a lot better to me.... - Michael Samra 10:38:07 03/22/08 (5)
    - RE: In spite of that the Sprague Vitamin Q's sound a lot better to me.... - Retsel 14:33:26 03/25/08 (0)
    - I am so glad personally that the K40Y9's are so close.... - tubesforever 14:50:36 03/22/08 (3)
      - RE: I am so glad personally that the K40Y9's are so close.... - Michael Samra 19:36:53 03/22/08 (2)
        
        RE: I am so glad personally that the K40Y9's are so close.... - reb 06:05:17 03/23/08 (1)
        
        RE: I am so glad personally that the K40Y9's are so close.... - Michael Samra 08:34:50 03/23/08 (0)
Ping Iron Butt!! Look at these servo static - Michael Samra 22:01:53 03/21/08 (6)
- It is not the issue of amps so much.. - cheap-Jack 07:54:22 03/24/08 (1)
  - RE: It is not the issue of amps so much.. - Michael Samra 23:07:37 03/24/08 (0)
- RE: Ping Iron Butt!! Look at these servo static - ironbut 10:57:15 03/22/08 (3)
  - RE: Ping Iron Butt!! Look at these servo static - Michael Samra 19:02:04 03/22/08 (2)
    - RE: Ping Iron Butt!! Look at these servo static - ironbut 09:14:43 03/23/08 (1)
      - RE: Ping Iron Butt!! Look at these servo static - Michael Samra 22:52:18 03/26/08 (0)
These Russian NOS 5U4Gs are - Michael Samra 18:24:13 03/21/08 (28)
- Russian octal full-wave rectifiers. - sser2 14:07:42 03/22/08 (2)
  - RE: Russian octal full-wave rectifiers. - Carl Michaels 10:04:17 03/25/08 (0)
  - RE: Russian octal full-wave rectifiers. - Michael Samra 20:07:15 03/22/08 (0)
- RE: These Russian NOS 5U4Gs are - REL54 05:00:29 03/22/08 (16)
  - RE: These Russian NOS 5U4Gs are - Michael Samra 11:02:29 03/22/08 (0)
  - trying to post pics - REL54 05:40:40 03/22/08 (14)
    - Notice.................. - drlowmu 10:14:10 03/22/08 (11)
      - Posting pix for drlowmu - zobsky 07:50:48 03/24/08 (3)
        
        RE: Posting pix for drlowmu (part 2) - zobsky 07:52:08 03/24/08 (2)
        
        RE: Posting pix for drlowmu (part 2) - somejoe 10:25:17 03/24/08 (0)
        
        Thanks............. - drlowmu 08:20:45 03/24/08 (0)
      - RE: Notice.................. - dave slagle 06:58:36 03/23/08 (1)
        
        RE: Notice.................. - drlowmu 07:58:12 03/23/08 (0)
      - RE: Notice.................. - Michael Samra 20:11:39 03/22/08 (1)
        
        RE: Notice.................. - becketma@yahoo.com 17:31:26 03/30/08 (0)
      - RE: Notice.................. - REL54 14:01:15 03/22/08 (2)
        
        RE: Notice.................. - Michael Samra 23:28:33 03/22/08 (1)
        
        RE: Notice.................. - REL54 05:40:09 03/23/08 (0)
    - lastly, pic three - REL54 05:55:01 03/22/08 (0)
    - pic two - REL54 05:48:26 03/22/08 (0)