In Reply to: Factory fabricated board solder? posted by mashley on June 10, 2012 at 13:25:04:
It is very possible that if the main PCB was 'wave-soldered' that it used a higher temp solder - and if there are lots of surface mount devices on the PCB then that is almost certainly the case.
a hotter iron - or if you have one of the Weller units with different temp. tips - changing to a higher temp should do the trick.
Happy Listening,
Happy Listening
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Factory fabricated board solder? - 6bq5 12:15:08 06/11/12 (0)