Cliff, my man, you were so helpful regarding my shorts, I've got another one for you. In the same channel, when I try to set the DC offset, the reading won't stabilize at 0 volts, but fluctuates +/- 2 volts or so. In addition, instead of 8mV for the idle current, I get 0 mV. I've checked the output transistors and the resistors and all seems to be well. The capacitors are all new. The left channel reads fine on both counts. Any ideas?
This post is made possible by the generous support of people like you and our sponsors:
Topic - ping: Cliff - The Real Dick Hertz 16:48:38 04/15/09 (4)