Tech Square

Technical and speculative discussion of amps, cables and other topics.

Specialty Groups: Tube DIY Asylum Propeller Head Plaza

Welcome! You must be a registered Inmate to post in this Asylum.
Please see this message for more information on this venue.

Free Classifieds

NEW --- CHORD CARNIVAL SLIVER SCREEN ---... - Gnars

Speaker cutout question.......... - colorsarepretty 13:52:56 09/30/06 (0)
Audio Technica ATH-7 Electret headphone troubles and questions. - SquinkyEye 11:09:44 09/17/06 (3)
- Any Stax SR-003 users out there? - SquinkyEye 18:23:24 09/18/06 (0)
- OEM electrets - nightdoggy 17:47:48 09/17/06 (0)
- Re: Audio Technica ATH-7 Electret headphone troubles and questions. - rkeman 15:03:01 09/17/06 (0)
noise in CAT-5 - melvynk 08:54:11 09/16/06 (2)
- Re: noise in CAT-5 - chris_w 15:12:00 10/17/06 (0)
- Re: noise in CAT-5 - sandromeda 15:11:16 10/04/06 (0)
Help with BK ST 140 amp - Rootbeerbudget 08:37:33 09/15/06 (3)
- With almost 100% certainty - nightdoggy 19:58:34 09/16/06 (2)
  - Re: With almost 100% certainty - Rootbeerbudget 20:49:36 09/16/06 (1)
    - How are the cosmetics? - nightdoggy 07:12:39 09/17/06 (0)
Can dimmer switches cause ground loop hum even when the lights are turned off?? - hartwerger 17:17:44 09/08/06 (2)
- It may not be a dimmer issue. - cheap-Jack 11:58:07 09/11/06 (0)
- Read this answer of mine... - Jacques 03:26:24 09/10/06 (0)
LM3875 Power Supply Decoupling? - gusser 09:51:18 09/06/06 (18)
- Let me explain deeper: - gusser 10:43:28 09/14/06 (0)
- Re: LM3875 Power Supply Decoupling? - fatbottle 08:17:14 09/13/06 (11)
  - Wrong. And advice for gusser - Jacques 01:51:12 09/14/06 (2)
    - Re: Wrong. And advice for gusser - fatbottle 06:49:56 09/14/06 (1)
      - No: no compression with given values. Analysis below - Jacques 08:21:55 10/02/06 (0)
  - Really ? How.. - cheap-Jack 09:07:01 09/13/06 (7)
    - Re: Really ? How.. - Ugly 10:15:35 11/30/06 (0)
    - Re: Really ? How.. - fatbottle 09:31:59 09/13/06 (5)
      - It's your call, pal. - cheap-Jack 11:50:14 09/13/06 (4)
        
        We are discussing chip amps not tubes - fatbottle 13:00:11 09/13/06 (3)
        
        What's the function of the "local bypass cap"? - cheap-Jack 14:03:34 09/13/06 (2)
        
        Save your moot argument, please. - cheap-Jack 07:46:06 09/14/06 (0)
        
        Re: What's the function of the "local bypass cap"? - fatbottle 14:17:52 09/13/06 (0)
- Go for it. - cheap-Jack 11:34:34 09/12/06 (4)
  - Re: Go for it. - chi7 19:15:12 10/10/06 (0)
  - Re: Go for it. - fatbottle 09:34:02 09/13/06 (2)
    - I know. - cheap-Jack 11:55:18 09/13/06 (1)
      - Re: I know. - fatbottle 12:47:05 09/13/06 (0)
Motorola vs Mospec - billwjr 16:00:14 09/05/06 (10)
- Re: Motorola vs Mospec - mbonham@charter.net 19:53:51 12/05/06 (0)
- Re: Motorola vs Mospec - Lou S 15:48:43 09/06/06 (5)
  - Re: Motorola vs Mospec - billwjr 16:08:26 09/06/06 (4)
    - BTW - Lou S 16:27:22 09/06/06 (0)
    - Re: Motorola vs Mospec - Lou S 16:25:52 09/06/06 (2)
      - Re: Motorola vs Mospec - billwjr 14:15:06 09/07/06 (1)
        
        Re: Motorola vs Mospec - Lou S 22:36:50 09/07/06 (0)
- Re: Motorola vs Mospec - Lou S 23:16:09 09/05/06 (2)
  - Re: Motorola vs Mospec - billwjr 15:14:22 09/06/06 (1)
    - Re: Motorola vs Mospec - unclejed613 17:05:47 10/26/06 (0)
12V DC power supply voltage too high - mc1b 09:40:21 09/03/06 (8)
- Re: 12V DC power supply voltage too high - mc1b 04:47:17 09/05/06 (5)
  - Re: 12V DC power supply voltage too high - Lou S 23:10:40 09/05/06 (4)
    - The load is a "T" amp! - clifff 01:54:48 09/06/06 (3)
      - Re: The load is a "T" amp! - Lou S 08:13:14 09/06/06 (2)
        
        Re: The load is a "T" amp! - Lou S 08:35:52 09/06/06 (1)
        
        Re: The load is a "T" amp! - unclejed613 16:47:06 10/26/06 (0)
- Re: 12V DC power supply voltage too high - Lou S 18:42:32 09/04/06 (0)
- Where does the 12V (13.8V) come from? - clifff 01:38:51 09/04/06 (0)
wanted: service manual for b&k precision model 2120 scope - SomeJoe 11:00:04 08/29/06 (0)
Parts for a distance-sensing auto-tonearm-lift? - Ronnie Ericsson 14:47:58 08/24/06 (6)
- Optical detectors - Jacques 01:55:22 08/25/06 (5)
  - Sweet! - Ronnie Ericsson 12:30:19 08/25/06 (4)
    - Re: Sweet! - Jacques 01:35:50 08/28/06 (3)
      - Re: Sweet! - Ronnie Ericsson 13:14:58 08/30/06 (2)
        
        Re: Sweet! - Jacques 09:41:19 09/06/06 (1)
        
        Aha! Thanks a lot! (nt) - Ronnie Ericsson 04:54:09 09/09/06 (0)
dead amp? - gwlvrns 09:29:39 08/17/06 (1)
- Re: dead amp? - FastEddy 17:10:18 08/17/06 (0)
Needing advice to stabilize a DC coupled CF with DC feedback. - SomeJoe 20:05:53 08/16/06 (1)
- Re: Needing advice to stabilize a DC coupled CF with DC feedback. - beermanpete@socal.rr.com 20:20:50 09/09/06 (0)
Looking for tips on how to get rid of tube preamp buzz !? - emt950 17:54:28 08/16/06 (4)
- How the buzz sounds like? - cheap-Jack 07:47:12 08/17/06 (3)
  - like this: bzzzzzzzzzzzzzz ...... - emt950 06:57:10 08/18/06 (2)
    - Re: like this: bzzzzzzzzzzzzzz ...... - Hacknet 10:46:55 09/22/06 (1)
      - Re: like this: bzzzzzzzzzzzzzz ...... - unclejed613 09:52:15 10/29/06 (0)
Need a tech to set bias/offset on PSE monoblock amplifiers - eoie9432@gmail.com 19:12:53 08/14/06 (0)
Re: Fault DVD - liu_nelson@hotmail.com 02:52:32 08/14/06 (3)
- Why worry fixing it? - cheap-Jack 07:09:00 08/14/06 (2)
  - Re: Why worry fixing it? - liu_nelson@hotmail.com 03:40:47 08/15/06 (1)
    - You're welcome. (nt) - cheap-Jack 08:35:53 08/15/06 (0)
Why are inductors used at an RCA output? - aljordan 18:36:40 08/07/06 (9)
- Re: Why are inductors used at an RCA output? - An update - aljordan 05:53:33 08/09/06 (1)
  - Re: Why are inductors used at an RCA output? - An update - Ted Smith 09:08:17 08/09/06 (0)
- Re: Why are inductors used at an RCA output? - clifff 07:02:49 08/08/06 (6)
  - Are you sure? - cheap-Jack 07:53:57 08/08/06 (5)
    - It means it won't do any HARM, dummy! - clifff 09:40:53 08/08/06 (4)
      - You're dummier than "dummy", dude. - cheap-Jack 10:34:56 08/08/06 (3)
        
        Hey guys, keep on topic and loose the personal stuff. - Ted Smith 11:33:03 08/08/06 (2)
        
        Who first started this flame needlessly? - cheap-Jack 12:00:57 08/08/06 (1)
        
        Warning - Ted Smith 12:23:20 08/08/06 (0)
Conductance meter for low resistance? Active XO - Ronnie Ericsson 14:20:39 08/06/06 (8)
- Re: Conductance meter for low resistance? Active XO - hitsware 07:40:13 08/09/06 (2)
  - True - Ronnie Ericsson 00:14:11 08/10/06 (1)
    - Re: True - hitsware 07:47:00 08/10/06 (0)
- Conductance and resistance are exactly the same thing. - Poindexter 19:45:03 08/06/06 (4)
  - FYI - Russ57 15:05:34 08/07/06 (2)
    - Now you talk to me! - Poindexter 19:20:40 08/07/06 (1)
      - That hand on the power cord huh? - Russ57 15:15:54 08/09/06 (0)
  - Reciprocal function - Ronnie Ericsson 23:17:27 08/06/06 (0)
Can I check for proper phase at the output of a dac/preamp - aljordan 10:02:31 08/03/06 (1)
- Re: Can I check for proper phase at the output of a dac/preamp - FastEddy 17:51:22 08/03/06 (0)
HELP!! What could be wrong with Sansui 9001 - tlc@mymtnhome.com 06:25:12 07/30/06 (2)
- FWIW - Ted Smith 09:33:33 07/30/06 (1)
  - broken solder or loose connector - Jacques 12:18:36 07/31/06 (0)
help with cap size - uni user 23:24:23 07/28/06 (1)
- Re: help with cap size - SomeJoe 22:15:17 09/03/06 (0)
Mac AMP technical help - fin1bxn@msn.com 16:54:38 07/23/06 (1)
- Re: Mac AMP technical help - efhjr 12:58:31 08/03/06 (0)
Function of capacitors inline with line inputs?? - CheapEric 06:04:42 07/21/06 (3)
- To block DC - Russ57 09:59:06 07/21/06 (2)
  - Re: To block DC & amp surges - FastEddy 17:55:16 08/03/06 (1)
    - Re: don't change value - FastEddy 18:03:02 08/03/06 (0)
Checking voltages on a Thorens TD125 - beto1 14:13:11 07/20/06 (4)
- This sounds very difficult. - clifff 13:31:25 07/24/06 (3)
  - Re: This sounds very difficult. - beto1 15:57:06 07/24/06 (2)
    - Re: This sounds very difficult. - clifff 06:26:36 07/25/06 (1)
      - "0" trimmpot adjust - beto1 06:59:13 07/25/06 (0)
Svetlana 6550's test low? - hjphjp 16:13:53 07/19/06 (0)
dc blocking caps - krzys 05:14:55 07/17/06 (1)
- Re: dc blocking caps - Lou S 00:03:27 09/06/06 (0)
Where to find cheap diode pn KV1236Z? - Tropical 16:08:07 07/15/06 (1)
- Re: Where to find cheap diode pn KV1236Z? - FastEddy 18:07:09 08/03/06 (0)
Dead output transistor wasn't dead at all . . . amp repair - JTB 17:10:29 07/08/06 (1)
- Avoiding More Popped Fuses - Marty 19:25:54 07/13/06 (0)
A/B Switch Quality differences? - Beatlebum 06:50:05 06/30/06 (1)
- You need quality UHF switches. - cheap-Jack 11:51:26 07/10/06 (0)
Need Help: DIY repair of Grado SR60 ! - N.B.C. 22:45:30 06/27/06 (2)
- Re: Need Help: DIY repair of Grado SR60 ! - unclestu52 13:28:19 06/28/06 (1)
  - Re: Need Help: DIY repair of Grado SR60 ! - kchdlh@sonic.net 12:26:56 04/28/08 (0)
Need help with Electrocompaniet AW60FTT amp - Jonathan Knight 00:45:21 06/27/06 (0)
Happy Father's Day...the Management! - Ted Smith 14:40:54 06/18/06 (0)
anyone know of an adequate freeware/shareware 'alegraic solver'? - Mart 22:22:45 06/08/06 (1)
- a dozen years ago... - Jim Hagerman 22:45:48 06/11/06 (0)
Testing data for 6DJ8/6922 on a I-177B w/ MX-949A / II - Madisonicboom 10:47:04 06/06/06 (0)
cool DIY toroids but question re blocking DC - radiance 13:38:51 06/05/06 (1)
- a solution that seems good - Jacques 11:52:02 06/07/06 (0)
recommendations schematic drawing program? - radiance 19:15:37 05/30/06 (4)
- DesignWorks ! - Jacques 12:07:51 05/31/06 (1)
  - Re: DesignWorks ! - radiance 13:53:39 05/31/06 (0)
- Re: recommendations schematic drawing program? - FastEddy 11:48:41 05/31/06 (1)
  - Re: recommendations schematic drawing program? - radiance 13:58:52 05/31/06 (0)
stupid question 2: why not just voltage doublers/triplers etc instead of heavy iron? - radiance 14:59:24 05/25/06 (10)
- Because the heaviness of the iron doesn't change. - Poindexter 17:47:05 07/04/06 (0)
- Re: stupid question 2: why not just voltage doublers/triplers etc instead of heavy iron? - Graham Maynard 15:32:42 07/03/06 (0)
- It is a sensible idea. (long) - cheap-Jack 11:18:40 05/30/06 (4)
  - Re: It is a sensible idea. (long) - radiance 19:13:34 05/30/06 (3)
    - You're welcome. - cheap-Jack 12:41:23 05/31/06 (2)
      - Re: You're welcome. - radiance 14:43:11 05/31/06 (1)
        
        Re: You're welcome. - FLZapped 05:56:06 10/09/06 (0)
- Re: stupid question 2: why not just voltage doublers/triplers etc instead of heavy iron? - chris_w 15:33:43 05/26/06 (2)
  - Re: stupid question 2: why not just voltage doublers/triplers etc instead of heavy iron? - J.Rankin 00:42:21 06/12/06 (0)
  - Re: stupid question 2: why not just voltage doublers/triplers etc instead of heavy iron? - radiance 16:14:44 05/26/06 (0)
while i'm at it, where do i find specs kt-90? - radiance 22:16:43 05/17/06 (6)
- The answer to all your questions - Russ57 12:16:58 05/18/06 (5)
  - Re: The answer to all your questions - radiance 15:16:55 05/18/06 (4)
    - I'll link you to an article - Russ57 10:10:15 05/19/06 (3)
      - Re: I'll link you to an article - radiance 17:52:15 05/19/06 (2)
        
        using only about 20% of it's capability - Russ57 12:27:12 05/20/06 (1)
        
        Re: using only about 20% of it's capability - radiance 21:54:14 05/23/06 (0)
measuring output impedance - radiance 20:46:54 05/17/06 (4)
- Perhaps a simple solution: - clifff 04:48:47 05/18/06 (3)
  - err, no... - real_jj 08:57:16 05/25/06 (0)
  - Re: Perhaps a simple solution: - radiance 07:53:00 05/18/06 (1)
    - Re: Perhaps a simple solution: - radiance 15:35:46 05/18/06 (0)
Need Schematic PIoneer AV Receiver - Daveslater 01:48:53 05/10/06 (3)
- Check with Pioneer direct. - cheap-Jack 08:25:10 05/11/06 (2)
  - Re: Check with Pioneer direct. - Daveslater 13:42:58 05/11/06 (1)
    - For servicing the unit, ... - cheap-Jack 17:16:52 05/11/06 (0)
T/S query:: is "Rms = Zmin - Re"? - Mart 04:36:37 04/30/06 (2)
- Don't go too academic. - cheap-Jack 11:33:04 05/01/06 (1)
  - odd, I've measured both - Mart 01:38:39 05/02/06 (0)
different type of component cable? - PhilJ 16:39:58 04/22/06 (3)
- Can't visualize what you said. Please post an image. (nt) - cheap-Jack 11:58:58 04/24/06 (2)
  - Re: Can't visualize what you said. Please post an image. (nt) - PhilJ 17:59:18 04/24/06 (1)
    - There are BNC-RCA adaptors available. - cheap-Jack 09:29:48 04/25/06 (0)
Schottky diode as a rectifier bridge on 300B filament - beto1 19:10:58 04/17/06 (3)
- Just get Schottky of the same specs. - cheap-Jack 06:43:45 04/18/06 (2)
  - Good choice. You'll love it. (nt) - cheap-Jack 08:18:32 04/18/06 (0)
  - Re: Just get Schottky of the same specs. - beto1 07:01:46 04/18/06 (0)
power up problem - jwelsch 18:31:11 04/13/06 (1)
- It won't be fuse blown that simple. - cheap-Jack 16:18:33 04/15/06 (0)
DACs using multiple TDA1543 - MGH 22:29:44 03/25/06 (0)
PLEASE HELP. I'M TRYING TO INSTALL VOL CONTROL IN MY AMP. - MGH 01:31:48 03/22/06 (4)
- How about one on your keyboard. Stop yelling - snert 16:45:21 04/14/06 (0)
- Here I would do... (long) - cheap-Jack 08:10:37 03/22/06 (2)
  - How about value of tube preamp attenuator for SS amps (nt) - firestop41 12:42:37 05/17/06 (0)
  - Re: Here I would do... (long) - MGH 00:24:17 03/27/06 (0)
Styrol Capacitor question - seadzz 17:34:11 03/21/06 (1)
- For LV filtering LV, use either of them is OK. (nt) - cheap-Jack 07:18:24 03/22/06 (0)
Passive Linestage Cable Load - Tippy 09:25:11 03/20/06 (2)
- Take the unused IC out ! - cheap-Jack 13:21:26 03/21/06 (1)
  - Re: Take the unused IC out ! - Tippy 15:01:58 03/21/06 (0)
JBL 100 rebuild - tantra 14:19:32 03/18/06 (2)
- Your way off the mark - Robert Hamel 18:38:54 04/13/06 (0)
- Re: JBL 100 rebuild - jea48 19:40:07 03/28/06 (0)
Help calculating the output Z of a mosfet constant current sink please... - SomeJoe 10:48:33 03/10/06 (2)
- Re: Help calculating the output Z of a mosfet constant current sink please... - unclejed613 13:58:56 05/14/06 (0)
- more info would improve ans - jcox 19:51:49 03/12/06 (0)
Is it worth using the 6dB attenuator? - tonyptony 06:58:54 03/04/06 (1)
- Why not try it if ... - cheap-Jack 09:20:02 03/07/06 (0)
Any X former experts? - Granholm 09:53:22 02/26/06 (18)
- Re: Any X former experts? - mettula 14:41:30 02/25/07 (0)
- Try Amveco #AA56252-038 - Russ57 10:28:50 03/02/06 (4)
  - Might get in trouble as my main is 230V AC ;o) nt! - Granholm 12:32:09 03/02/06 (0)
  - Re: Try Amveco #AA56252-038 - Granholm 11:41:39 03/02/06 (2)
    - Re: Try Amveco #AA56252-038 - Russ57 12:18:17 03/02/06 (1)
      - I have heard that before (EI is better) - Granholm 12:29:45 03/02/06 (0)
- I'm not a whatever expert. - cheap-Jack 12:25:24 02/27/06 (11)
  - Might not have been all that clear ;o) - Granholm 12:42:04 02/27/06 (10)
    - You want to post the specs of the amp.. - cheap-Jack 13:00:38 02/27/06 (9)
      - Here thay are! - Granholm 13:13:26 02/27/06 (8)
        
        Are this the spec you need? - Granholm 10:16:22 02/28/06 (6)
        
        Yes, I got it now. - cheap-Jack 11:15:56 02/28/06 (5)
        
        Good! And some more details! - Granholm 12:26:10 02/28/06 (4)
        
        More VA power, more O/P power. - cheap-Jack 07:59:15 03/01/06 (3)
        
        Dead end? - Granholm 12:36:37 03/01/06 (2)
        
        Not yet. (long) - cheap-Jack 13:14:09 03/01/06 (1)
        
        Not that long ;o) - Granholm 13:25:55 03/01/06 (0)
        
        Sorry, I missed the specs. Pls re-post. (nt) - cheap-Jack 07:32:53 02/28/06 (0)
Polypropylene Cap Prob - studer79 19:48:46 02/16/06 (2)
- Re: Polypropylene Cap Prob - Tre' 10:16:08 02/24/06 (0)
- Where in the deck are these PP film caps used? (nt) - cheap-Jack 11:03:44 02/20/06 (0)
TV-2 tester - Haber 15:24:06 02/07/06 (2)
- Re: TV-2 tester - unclejed613 16:16:02 05/14/06 (1)
  - Re: TV-2 tester correction - unclejed613 16:17:31 05/14/06 (0)
Mitsubishi westar - abyss 13:57:31 01/31/06 (0)
speaker/biamp crossovers - commonmode@earthlink.net 21:13:34 01/26/06 (4)
- Re: speaker/biamp crossovers - andyr 02:17:35 07/22/06 (0)
- Re: speaker/biamp crossovers - beermanpete@socal.rr.com 19:20:14 02/01/06 (0)
- Re: speaker/biamp crossovers - avhtda 09:10:30 01/31/06 (0)
- Re: speaker/biamp crossovers - Kal Rubinson 09:06:36 01/27/06 (0)
Rhythmic Clicking through our PA - ChrisWaite 07:18:13 01/21/06 (4)
- Re: Rhythmic Clicking through our PA - Dman 07:41:27 02/21/06 (0)
- Questions: - cheap-Jack 11:43:13 02/14/06 (0)
- Cell phone interference? (nt) - mpathus 17:13:19 01/29/06 (1)
  - I just experienced this myself so it is real(nt) - Russ57 08:30:26 01/30/06 (0)
Panasonic SA-XR70 Digital Amp Distortion - rondo 05:13:55 01/18/06 (0)
Best drop-in replacement for LM324 quad OPamp......nt - Tre' 21:58:12 01/15/06 (2)
- Re: Best drop-in replacement for LM324 quad OPamp......nt - unclejed613 16:44:21 05/14/06 (0)
- So, you guys don't know? nt - Tre' 10:14:16 02/24/06 (0)
transformer coupling - GTCharlie 22:51:01 01/10/06 (2)
- Re: transformer coupling - danlaudionut 19:09:04 03/05/06 (0)
- Re: transformer coupling - beermanpete@socal.rr.com 22:00:50 02/02/06 (0)
Stereo analog delay and reverb processor-help! - DrBob1 21:16:06 01/10/06 (2)
- Re: Stereo analog delay and reverb processor-help! - Tweekeng 08:19:53 01/24/06 (1)
  - Re: Stereo analog delay and reverb processor-help! - DrBob1 13:26:44 01/24/06 (0)
What Caps to use for Yamaha CT-7000 Tuner Power Supply? - Bru7 16:16:07 01/04/06 (0)
NAD 7100 with FLAMES COMING OUT! HELP - 61xs@tds.net 09:58:24 01/03/06 (2)
- Yes, it could be burnt resistors. - cheap-Jack 11:55:45 02/14/06 (0)
- Re: NAD 7100 with FLAMES COMING OUT! HELP - Chris O 07:43:42 01/18/06 (0)
back to back output coupling caps - reddog 18:56:03 12/31/05 (9)
- Re: back to back output coupling caps - beermanpete@socal.rr.com 19:29:40 02/01/06 (0)
- Re: back to back output coupling caps - DeanKS 18:54:05 01/07/06 (1)
  - Re: back to back output coupling caps - reddog 19:26:49 01/07/06 (0)
- It is a bit wierd .... - clifff 13:07:16 01/01/06 (5)
  - Re: It is a bit wierd .... - reddog 18:05:21 01/01/06 (4)
    - Ignore Cliff's "No", Blackgate type N are nonpolar (nt) - jcox 20:16:18 03/12/06 (1)
      - Whoops! True, indeed! (nt) - clifff 07:23:46 03/13/06 (0)
    - No - clifff 15:13:35 01/02/06 (1)
      - Re: No - beermanpete@socal.rr.com 18:13:51 01/02/06 (0)
PSE studio V help, need schematics bad! - eoie9432@gmail.com 17:00:35 12/29/05 (3)
- Re: PSE studio V help, need schematics bad! - Joey54 17:16:06 01/25/06 (2)
  - Re: PSE studio V help, need schematics bad! - eoie9432@gmail.com 11:27:24 01/26/06 (1)
    - Re: PSE studio V help, need schematics bad! - Joey54 13:00:52 01/26/06 (0)
Keith Howards Digital Findings... - jeremylieberman@nyc.rr.com 09:38:56 12/28/05 (0)
A weird problem about my Marantz 2235B - Yataghan 09:55:46 12/27/05 (1)
- What is "scratchy"? - cheap-Jack 08:38:02 02/14/06 (0)
Resistor identification - Raja 03:25:45 12/24/05 (2)
- You were right Cory M.! - Raja 15:41:35 02/11/06 (0)
- Sounds like an old Allen-Bradley to me (n/t) - Cory M. 15:18:14 01/01/06 (0)
HELP! Repair person in NJ or NY?! Dynaco amp. - transmissionfluid 03:55:52 12/21/05 (1)
- Re: HELP! Repair person in NJ or NY?! Dynaco amp. - Bill Way 10:52:34 05/11/06 (0)
Dual opamp close to the sound of the BB OPA627?? - briang@ij.net 21:30:22 12/19/05 (2)
- Re: Could this be what you are looking for - dhrab 04:42:51 12/20/05 (1)
  - Not exactly, but now...which player to mod?? DVD22 vs. Tosh 4960 - briang@ij.net 16:08:43 12/20/05 (0)
soft start circuit for big power amp? - PSP 10:06:23 12/19/05 (2)
- Rod Elliott has a soft start circuit for big power amps ... - andyr 12:23:15 03/16/06 (0)
- Re: soft start circuit for big power amp? - Ole Lund Christensen 14:43:16 12/28/05 (0)
Nixie driver and logic circuit questions - wlee 23:04:48 12/17/05 (3)
- Sounds like an oscillator stage may be intermittent - eds65gto 13:08:12 12/19/05 (1)
  - Re: Sounds like an oscillator stage may be intermittent - wlee 13:18:12 12/19/05 (0)
- cloneseedling - hj@clonep.com 01:35:13 12/19/05 (0)
Carver 4000t Pre-Amp Fix Requested -- HELP! - Theswits 08:34:35 12/16/05 (0)
If I might ask... - gwlvrns 21:34:49 12/11/05 (1)
- My guess is... - mpathus 22:24:49 12/12/05 (0)
power conditioner - diram6 18:53:12 12/01/05 (1)
- Yes, it's a good idea. - cheap-Jack 12:12:57 02/14/06 (0)
Where to buy fuses for ARC CL-120 - Chaba 04:45:06 11/21/05 (2)
- Re: Where to buy fuses for ARC CL-120 - unclestu52 13:29:28 11/24/05 (0)
- Re: Where to buy fuses for ARC CL-120 - Kal Rubinson 17:15:57 11/22/05 (0)
SPL at listening position, do you really have to measure? - KlausR. 01:01:34 11/19/05 (6)
- Re: SPL at listening position, do you really have to measure? - Drew Eckhardt 19:55:30 02/28/06 (0)
- Yes, you do need a SPL meter if ..... - cheap-Jack 08:27:35 02/14/06 (0)
- Re: SPL at listening position, do you really have to measure? - Pat D 17:11:46 01/16/06 (0)
- A digital SPL Meter is only $50 at Radio Shack....(nt) - mkuller 15:08:59 12/01/05 (0)
- Re: SPL at listening position, do you really have to measure? - Kal Rubinson 18:14:06 11/20/05 (1)
  - Absolutely - Jim Tavegia 11:59:11 11/23/05 (0)
Setting bias current and DC offset on marantz 2235b - eighty6accord@yahoo.com 01:51:36 11/14/05 (6)
- Re: Setting bias current and DC offset on marantz 2235b - AudiophileINRecovery 15:43:32 12/07/05 (0)
- Re: Setting bias current and DC offset on marantz 2235b - Tweekeng 09:52:36 11/15/05 (4)
  - Re: Setting bias current and DC offset on marantz 2235b - rbowdish@pacbell.net 13:59:23 11/18/05 (0)
  - Re: Setting bias current and DC offset on marantz 2235b - eighty6accord@yahoo.com 11:48:28 11/15/05 (2)
    - Re: Setting bias current and DC offset on marantz 2235b - Tweekeng 14:28:27 11/16/05 (1)
      - Replacing the caps is a cheap fix...don't worry - seadzz 04:40:34 11/27/05 (0)
How to bypass the optic couplers in a Marantz 10B? - morrowaudio 17:38:55 10/30/05 (2)
- Re: How to bypass the optic couplers in a Marantz 10B? - morrowaudio 07:26:03 10/31/05 (1)
  - Re: How to bypass the optic couplers in a Marantz 10B? - truep 07:51:00 11/27/05 (0)
Conversion of output MOSFETs in Counterpoint SA- amplifiers - Cory M. 18:58:47 10/23/05 (3)
- Re: Conversion of output MOSFETs in Counterpoint SA- amplifiers - GStew 18:19:13 01/09/07 (0)
- Re: Conversion of output MOSFETs in Counterpoint SA- amplifiers - ratzu@t-online.de 11:58:01 12/09/05 (0)
- She's back up and sounding better than ever! (n/t) - Cory M. 19:42:44 11/24/05 (0)
are there slow-switching digital amps? - Mart 06:49:53 10/23/05 (0)
Measure amp's output power? - Richidoo 12:28:00 10/16/05 (6)
- Add 60Hz test signal. - cheap-Jack 10:35:42 02/14/06 (0)
- Re: Measure amp's output power? - Bob Wortman 17:56:57 12/22/05 (0)
- Thanks - Richidoo 08:59:58 10/17/05 (0)
- Another note - truep 07:36:56 10/17/05 (0)
- Re: Measure amp's output power? - truep 07:31:49 10/17/05 (0)
- Re: Measure amp's output power? - mikee55 06:40:00 10/17/05 (0)
Opinion on badass 0.001uf/600V cap? - triode3 06:32:09 10/13/05 (4)
- Re: Opinion on 0.001uf cap... Found - triode3 19:19:48 12/14/05 (0)
- Re: Opinion on badass 0.001uf/600V cap? - Francois G 11:02:38 11/09/05 (1)
  - Re: Opinion on badass 0.001uf/600V cap? - triode3 19:12:07 11/22/05 (0)
- Re: Opinion on badass 0.001uf/600V cap? - Mart 07:51:45 10/23/05 (0)
Nakamichi 600 II grounding problem, I think. HELP!! - oldglide 20:47:52 10/09/05 (1)
- I found the problem, broken foil trace - oldglide 13:03:50 10/11/05 (0)
pin configuration IEC receptacle - dazzdax@xs4all.nl 14:04:42 09/14/05 (3)
- Re: pin configuration IEC receptacle - Jim Hagerman 09:04:08 09/21/05 (2)
  - Re: pin configuration IEC receptacle - dazzdax@xs4all.nl 13:20:56 09/21/05 (1)
    - Re: pin configuration IEC receptacle - jea48 18:49:55 03/09/06 (0)
Amplifier Troubles - mccormick 05:12:17 09/14/05 (2)
- Re: Amplifier Troubles - mikee55 07:40:56 10/02/05 (0)
- Re: Amplifier Troubles - mccormick 08:00:17 09/14/05 (0)
Amber Series 70 Amplifier schematics - Shaun E 09:31:35 09/12/05 (0)
Need pot value for simple volume control - Coner 19:53:38 09/02/05 (6)
- What is the input 1st stage of power amp? FET or bipolar? nt - grhughes 20:40:38 09/15/05 (0)
- Re: Need pot value for simple volume control - clifff 01:11:36 09/03/05 (4)
  - similar question... - paulsim 20:05:00 09/15/05 (0)
  - Re: Need pot value for simple volume control - Coner 09:51:18 09/03/05 (2)
    - Re: Need pot value for simple volume control - clifff 13:23:25 09/03/05 (1)
      - Hey thanks, you're great, so is AA :-) nt - Coner 15:20:01 09/03/05 (0)
CRATE VC508 problem - Jeff Bragg 07:13:08 09/01/05 (0)
Dual 1228 Servicing - lukiedog 10:11:34 08/29/05 (1)
- Go to Vinyl board and "ping" No Transistors for Dual help - Road Warrior 11:49:26 11/29/05 (0)
swaying cartridge question! PLEASE HELP! - pasta 20:35:16 08/27/05 (9)
- IMO, here is my 'cure-all'. - cheap-Jack 11:28:14 09/02/05 (0)
- Sheesh! no need - unclestu52 11:07:57 08/28/05 (7)
  - Re: Sheesh! no need - pasta 17:12:21 08/28/05 (6)
    - IIRC, record center holes - unclestu52 13:39:11 08/29/05 (5)
      - Re: IIRC, record center holes - Tom Dawson 07:46:28 10/21/05 (0)
      - Re: IIRC, record center holes - John in PA 00:15:53 09/02/05 (0)
      - Re: IIRC, record center holes - pasta 16:37:38 08/29/05 (2)
        
        Re: IIRC, record center holes - unclestu52 14:47:57 09/01/05 (1)
        
        Re: IIRC, record center holes - pasta 13:01:06 09/03/05 (0)
Good hookup wire for a phono - Pauly 04:30:46 08/25/05 (4)
- Re: Good hookup wire for a phono - Jacques 11:56:12 08/25/05 (3)
  - I got better choice. - cheap-Jack 06:50:59 08/30/05 (0)
  - Erm ... inside a tube phono amp - Pauly 14:57:09 08/25/05 (1)
    - I have used sucessfully in tubed components ... - garth 07:48:26 09/27/05 (0)
Richard Grays Power company line conditioners - Daly2k@aol.com 19:29:44 08/21/05 (13)
- Re: Richard Grays Power company line conditioners - moray james 00:55:20 09/10/05 (1)
  - Re: Richard Grays Power company line conditioners - Daly2k@aol.com 09:34:36 09/10/05 (0)
- Re: Richard Grays Power company line conditioners - kenster 13:20:57 09/07/05 (1)
  - Re: Richard Grays Power company line conditioners - Daly2k@aol.com 09:35:27 09/10/05 (0)
- Please keep us posted as to the results of your project. nt. - johnmil 05:17:35 08/24/05 (2)
  - Re: Please keep us posted as to the results of your project. nt. - Daly2k@aol.com 16:24:24 09/06/05 (1)
    - Re: Please keep us posted as to the results of your project. nt. - Daly2k@aol.com 09:36:32 09/10/05 (0)
- before you spend all that money on RGPC - GTF 12:53:37 08/23/05 (0)
- Re: Richard Grays Power company line conditioners - Norm Strong 17:11:12 08/22/05 (2)
  - Re: Power line conditioners - chris_w 12:50:52 08/27/05 (0)
  - Re: Richard Grays Power company line conditioners - Daly2k@aol.com 06:08:07 08/23/05 (0)
- Would you be interested in Ocean-Front Property in Az? nt. - johnmil 05:04:07 08/22/05 (1)
  - Re: Would you be interested in Ocean-Front Property in Az? nt. - Daly2k@aol.com 06:19:59 08/22/05 (0)
Amp w/High Freq Ringing on Output - matt_sieling@yahoo.com 09:42:47 08/18/05 (0)
Aiwa cassette deck playback problem - John in PA 07:42:49 08/12/05 (1)
- Re: Aiwa cassette deck playback problem - jon_beardy 07:57:37 12/26/05 (0)
Sanken transistors - Michael J. 16:35:07 07/31/05 (2)
- Re: Sanken transistors - ostie01 21:29:38 10/07/05 (0)
- Re: Sanken transistors - desertshark 08:05:06 08/01/05 (0)
Amplifier Problem Diagnosis - McCracken 20:31:24 07/29/05 (2)
- Re: Amplifier Problem Diagnosis - Tweekeng 11:15:21 09/13/05 (0)
- Re: Amplifier Problem Diagnosis - Michael J. 17:39:02 07/31/05 (0)
Turntable Problem - Hwood96 09:12:52 07/25/05 (5)
- Re: Turntable Problem - Michael J. 17:10:47 07/31/05 (0)
- Re: Turntable Problem - chris_w 10:08:14 07/25/05 (3)
  - Re: Turntable Problem - Hwood96 14:14:42 07/25/05 (2)
    - Re: Turntable Problem - chris_w 16:58:20 07/25/05 (1)
      - Re: Turntable Problem - lukiedog 10:08:18 08/29/05 (0)
Rolling your own Power Cord - AgTone 14:20:53 07/23/05 (1)
- Re: Rolling your own Power Cord - Bill Way 16:40:10 07/31/05 (0)
Measuring Tool - AgTone 21:25:21 07/17/05 (2)
- Re: Measuring Tool - Jacques 01:18:40 07/19/05 (1)
  - Re: Measuring Tool - AgTone 20:08:24 07/20/05 (0)
all things being equal which order is best for a 12dB/octave bandpass? - Mart 12:48:59 07/15/05 (1)
- ooh, the latter also is the one with LC frequency that's at all attenuated too _ (nt) - Mart 20:26:25 07/15/05 (0)
Lavardin input impedance: 10k ohms - MarylandMike 07:14:07 07/15/05 (0)
Need Acoustat TNP Schematic - Mister Pig 22:04:34 07/14/05 (0)
blinking HDCD light on Star Wars gold cd-r copy - Izman 18:00:32 07/13/05 (1)
- Re: blinking HDCD light on Star Wars gold cd-r copy - Eric Dube 06:16:11 07/14/05 (0)
receiver that only works on tape monitors - fireondamtn 15:25:48 07/03/05 (2)
- Re: receiver that only works on tape monitors - fireondamtn 07:43:59 07/04/05 (1)
  - Re: receiver that only works on tape monitors - chris_w 11:20:48 07/09/05 (0)
RG Dynamics D-3 Preamp- any info? - Cory M. 21:58:49 06/15/05 (2)
- Re: RG Dynamics D-3 Preamp- any info? - jrgrant 15:40:08 10/31/05 (0)
- Re: RG Dynamics D-3 Preamp- any info? - afilado 09:22:41 06/22/05 (0)
Measuring output voltage from CD, preamp, amps- How to? - No Disc 11:27:30 06/09/05 (2)
- Re: Measuring output voltage from CD, preamp, amps- How to? - jcox 16:37:47 06/12/05 (1)
  - Re: Measuring output voltage from CD, preamp, amps- How to? - No Disc 17:07:19 06/12/05 (0)
Turntable acting as a radio - help needed. - JohnL 18:41:13 06/05/05 (15)
- Re: Turntable acting as a radio - help needed. - sam9 18:20:26 07/09/05 (0)
- I had this problem once - SiBurning 08:43:12 06/16/05 (1)
  - follow up: I had this problem once - SiBurning 08:49:48 06/16/05 (0)
- Solving the problem..Is it a tube or transistor preamp?nt - grhughes 16:53:53 06/14/05 (0)
- Re: Turntable acting as a radio - help needed. - Bob Wortman 20:00:58 06/05/05 (10)
  - You have no idea. - garth 20:41:59 06/05/05 (8)
    - check your earthing and connections as well asthe screening of your IC's - chris_w 16:12:22 06/06/05 (2)
      - it is not a ground or shield problem - garth 18:35:28 06/06/05 (1)
        
        Re: it is not a ground or shield problem - chris_w 13:00:43 06/07/05 (0)
    - Re: You have no idea. - Bob Wortman 04:02:58 06/06/05 (1)
      - Sorry, I meant - garth 18:38:28 06/06/05 (0)
    - Any solutions? (nt) - JohnL 23:57:01 06/05/05 (2)
      - Most likely - garth 06:53:45 06/06/05 (1)
        
        Re: Most likely - JohnL 07:16:37 06/06/05 (0)
  - Re: Turntable acting as a radio - help needed. - JohnL 20:40:45 06/05/05 (0)
stereo to computer link - gatman 07:46:07 06/02/05 (1)
- Fwd to PC Forum, it's been done to death -nt- - jbmcb 12:57:13 06/02/05 (0)
Negative feedback and digital amps - P. Hanley 16:52:08 05/31/05 (1)
- Re: Negative feedback and digital amps - BFitz 21:10:38 06/24/05 (0)
press play but no sound-SFCD-1 - Thirsty Ear 12:26:53 05/27/05 (0)
Marantz 2285B Dead - lukiedog 08:30:22 05/27/05 (1)
- How about making a few simple measurements first? nt - clifff 11:49:11 05/29/05 (0)
Linn Unidisc SC - Maril555 08:28:15 05/19/05 (0)
Heathkit HD-1 Distorion analyzer - alexis28 15:24:27 05/13/05 (4)
- I think I have one of those.... - JimL 12:13:16 06/23/05 (0)
- Re: Heathkit HD-1 Distorion analyzer - john curl 16:15:02 05/21/05 (2)
  - Re: Heathkit HD-1 Distorion analyzer - alexis28 16:34:34 05/21/05 (1)
    - AFAIR, and it has been a long time! ... - clifff 16:42:55 05/21/05 (0)
LCR meter question - maneil@fuse.net 08:20:14 05/04/05 (0)
Beckman Megohmmeter L10A - GK 13:00:46 05/01/05 (0)
need-a-turntable - Roterhals 19:22:15 04/28/05 (4)
- get a turntable - Bill Way 05:48:26 05/22/05 (0)
- Re: need-a-turntable - benie 00:54:26 05/20/05 (0)
- Not intended to be a wet blanket... (long text) - cheap-Jack 18:58:37 04/29/05 (0)
- Re: need-a-turntable - NewbieBaby 04:01:39 04/29/05 (0)
What I learned about chassis cooling fans - NewbieBaby 04:32:58 04/27/05 (5)
- There're easy & cheapie ways of silencing a cooling fan. - cheap-Jack 10:53:21 04/27/05 (4)
  - Re: There're easy & cheapie ways of silencing a cooling fan. - unclestu52 11:46:40 04/27/05 (3)
    - Yup... - mpathus 22:14:53 07/07/05 (0)
    - It depends.... - cheap-Jack 07:07:24 04/28/05 (0)
    - Nah! - clifff 14:26:49 04/27/05 (0)
Upgrade Paradigm Studio 80v2 XOver - jmall 15:03:00 04/24/05 (1)
- You can't eat yr cake & still have it. - cheap-Jack 11:34:14 04/27/05 (0)
A question on BlackGate super e caps and capacitance - tedbaron 07:28:33 04/17/05 (7)
- A second opinion... - Russ57 11:29:20 04/20/05 (4)
  - Re: A second opinion... - tedbaron 09:14:44 04/21/05 (3)
    - The best option... - Russ57 18:33:10 04/21/05 (2)
      - Re: The best option... - tedbaron 18:13:33 04/22/05 (1)
        
        Re: The best option... - Russ57 07:40:40 04/25/05 (0)
- Get them while you can, they are not made anymore - Ole Lund Christensen 04:34:55 04/20/05 (1)
  - Re: Get them while you can, they are not made anymore - tedbaron 09:07:03 04/21/05 (0)
MJE182 vs NTE182 - tedbaron 19:56:35 04/15/05 (1)
- Re: MJE182 vs NTE182 - Curtis J 08:11:21 11/14/05 (0)
capacitor ID question: "22" - tedbaron 06:06:29 04/15/05 (1)
- likely to be 22nF, but you really should get a meter nt - clifff 10:14:23 04/15/05 (0)
How to use an oscilloscope to make measurements - dtalley 13:46:17 04/12/05 (2)
- Re: looking for hum etc. - chris_w 11:29:06 04/13/05 (0)
- Measurements - jbmcb 18:12:44 04/12/05 (0)
Dead Oscilloscope - Slick 12:46:33 04/10/05 (1)
- Re: Dead Oscilloscope - unclestu52 11:31:21 04/16/05 (0)
super super tweeter - unclestu52 01:55:48 04/06/05 (8)
- Can't you use a RF device - Gregm 06:59:15 04/07/05 (0)
- Have you tried any alternatives? - pburant 06:25:07 04/06/05 (6)
  - Re: Have you tried any alternatives? - unclestu52 10:55:33 04/06/05 (2)
    - Thanks... - pburant 12:49:46 04/06/05 (1)
      - Re: Thanks... - unclestu52 13:12:21 04/06/05 (0)
  - Re: Have you tried any alternatives? - chris_w 10:40:20 04/06/05 (2)
    - Re: Serious Audiophiles - geoffkait 06:54:28 04/11/05 (1)
      - Geoff - It was a joke ! -nt - chris_w 11:30:54 04/13/05 (0)
replacement power tranny for McIntosh MC-30 amp? - u47 18:23:12 04/04/05 (1)
- No....but there's are rewinders.... - doodlebug 17:05:59 05/18/05 (0)
Odd stereo set up needs help - bridc1 18:01:14 04/03/05 (3)
- Twist the wires onto another wire - pburant 09:20:54 04/05/05 (2)
  - Re: Twist the wires onto another wire - bridc1 14:28:46 04/05/05 (1)
    - Wal-Mart to the rescue - pburant 06:34:23 04/06/05 (0)
Cap value question - FTT 10:27:39 04/02/05 (1)
- 0.1uF (K=10%) nt - clifff 13:47:31 04/02/05 (0)
What AC Isolation Transformer capacity? - NewbieBaby 12:18:23 03/28/05 (12)
- What I did was - NewbieBaby 04:02:05 04/08/05 (3)
  - Congrats, good choice but.... - pmkap 09:21:30 04/08/05 (2)
    - As the Inuit in Never Cry Wolf said, - NewbieBaby 14:37:47 04/08/05 (1)
      - Never Cry Wolf - Great Reference! Great Movie!(nt) - pmkap 16:53:03 04/08/05 (0)
- Have you looked at something like this? - GTF 10:04:12 04/02/05 (1)
  - Yes, Thanks. - NewbieBaby 17:59:45 04/04/05 (0)
- That ain't what you want:) - Russ57 12:26:08 03/31/05 (5)
  - Re: That ain't what you want:) - NewbieBaby 15:08:56 04/01/05 (4)
    - Cheapest way...if you are in USA is.... - Russ57 04:24:24 04/04/05 (3)
      - All things being equal .... - pmkap 20:40:48 04/08/05 (0)
      - Re: Cheapest way...if you are in USA is.... - NewbieBaby 17:58:47 04/04/05 (1)
        
        Re: Cheapest way...if you are in USA is.... - P. Hanley 18:17:58 05/31/05 (0)
Bizzare stereo problem - Brian McGowan 17:36:57 03/26/05 (1)
- Re: Bizzare stereo problem - Bob Wortman 18:40:23 03/27/05 (0)
Explanation of open vs. load voltage - TJR 19:47:05 03/25/05 (2)
- What you want is the RMS O/P voltage. - cheap-Jack 13:20:23 04/27/05 (0)
- Re: Explanation of open vs. load voltage - chris_w 05:38:35 03/26/05 (0)
plate voltage discrepancy - 2395 01:46:50 03/23/05 (0)
Intelligent Chip and quantum dots, any experts ? - KlausR. 02:37:49 03/22/05 (24)
- Scientific Non Sequitur - jbmcb 10:16:27 03/22/05 (23)
  - Re: Scientific Non Sequitur - KlausR. 21:54:50 03/23/05 (0)
  - You have no idea whereof you speak. nt - clarkjohnsen 10:22:39 03/23/05 (21)
    - what a waste of time - mr_moonlight 00:08:43 04/09/05 (1)
      - My sympathies to the parents who raised such an ungracious child. nt - clarkjohnsen 05:32:15 04/11/05 (0)
    - Since you appear to be in the know... - KlausR. 23:57:06 03/23/05 (17)
      - "The CD must spin in order to have an effect." I swear... - clarkjohnsen 10:28:29 03/24/05 (16)
        
        One simple question: can you read ??? - KlausR. 13:34:57 03/24/05 (15)
        
        "I translate this into..." You mis-translate. - clarkjohnsen 11:11:21 03/25/05 (14)
        
        English not being my mother tongue... - KlausR. 23:56:08 03/25/05 (13)
        
        One simple question: can you read ??? (I'm quoting yourself, so don't pull the Muettersprache card on me!) - clarkjohnsen 08:04:03 03/26/05 (12)
        
        It's "Muttersprache" to begin with... - KlausR. 08:35:54 03/26/05 (11)
        
        Re: It's "Muttersprache" to begin with... - clarkjohnsen 08:51:11 03/26/05 (10)
        
        A first step in the good direction... - KlausR. 11:12:40 03/26/05 (9)
        
        The dics does NOT have to spin. Can't you get that out of your head? - clarkjohnsen 11:38:09 03/26/05 (8)
        
        Re: The dics does NOT have to spin. Oh really? - KlausR. 21:29:37 03/26/05 (7)
        
        I certainly have a VERY healthy skepticism about the IC but I think - sjb 11:19:24 04/02/05 (2)
        
        You're right... - KlausR. 05:38:51 04/03/05 (0)
        
        "Of course no one can explain how..." And your proof of that sweeping statement, is...? - clarkjohnsen 20:58:55 04/02/05 (0)
        
        "But what I did not get was answers." I have told you repeatedly... - clarkjohnsen 08:51:03 03/28/05 (3)
        
        Re: "But what I did not get was answers." I have told you repeatedly... - Mudcat 04:04:40 03/29/05 (1)
        
        Otherwise [Clark] would fess up that he does not actually know how the chip works. LOL! - clarkjohnsen 20:56:46 04/02/05 (0)
        
        No reply from JSMR (yet), no explanation from you, ...John Curl remains silent... - KlausR. 09:55:47 03/28/05 (0)
    - ^ One of the 'it works don't know how your explanation is wrong' crowd -nt- - jbmcb 13:13:38 03/23/05 (0)
Cap ? for clifff and others - firestop41 11:45:27 03/21/05 (2)
- Since it is 60Hz hum not 120Hz ... - clifff 14:54:58 03/21/05 (1)
  - Re: Since it is 60Hz hum not 120Hz ... - firestop41 10:33:56 03/23/05 (0)
resistor ID question - tedbaron 21:21:16 03/19/05 (1)
- Re: resistor ID question - clifff 09:44:28 03/20/05 (0)
A Question of Diodes - tedbaron 20:22:36 03/17/05 (3)
- Re: A Question of Diodes - tedbaron 21:45:54 03/24/05 (0)
- Re: A Question of Diodes - tedbaron 16:48:48 03/19/05 (1)