Home SET Asylum

Single Ended Triodes (SETs), the ultimate tube lovers dream.

RE: Thanks

"Take your wire and put a piece of tape at one random end. Then disconnect the positive cable going from the speaker to the amplifier and connect the "test wire". "

That part confuses me a little.


Do you mean that I don't use the positive wire of my speaker wire pair, I instead use a different single wire leaving the positive wire of my existing speaker wire pair disconneccted?

How do I make sure that the physical relationship between the single wire (that I'm reversing as I test and listen) and my existing speaker wire pair (of which I am now only using the negative conductor) doesn't change each time I conduct the test?

If the spacing and general physical orientation between my existing speaker wire pair and the single wire changes, that would cause changes to the capacitance and inductance between the two for each listening test and invalidate the test, no?



Thanks

Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups
  • RE: Thanks - Tre' 08:11:26 09/21/15 (1)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.