In Reply to: RE: Maxing stock chokes and DHT filament transformers posted by drlowmu on December 7, 2014 at 07:44:47:
If those abortions are what your company is all about , I think you may hit the wall sometime soon... I have no issues about 22AWG wire , in fact I extensively use and recommend 23AWG 1/0.6 silver plated copper in Teflon for all signal and HT wiring . It's nice to use and the insulation doesn't shrink back or burn . It's most certainly thicker than whats in your transformers , chokes and output transformers , not forgetting 'Fraker' filters . The orchestra gets through easily , as for bandwidth , this is easily quantifiable , but you never provides figures so you only have anecdotal evidence .
There is a reason that manufacturers don't use your logic , it's because you are a crackpot ;)
Do you also apply silly wire to heater connections ?
Al
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Maxing stock chokes and DHT filament transformers - Al Noakes 11:09:37 12/07/14 (0)