In Reply to: RE: 32 Ohm Drivers // 32 Ohm OPTs posted by maxhifi on November 28, 2014 at 14:05:46:
Fs of the driver is 400hz. See link below. I'm screwed. In fact, it's says the fequency response is 400hz to 4000hz. They are being used in these horns all the way down to 200hz with EQ. I was looking at 275hz to 350hz as crossover point. Putting the drivers in a compression chamber must lower the frequency response. I know it does that. The question is, does it also lower the Fs. I will have to post a question on the Redspade blog, to see about getting an answer.
"This ought to be a very loud system when it's completed!"
It's loud with one watt baby! No, four tubes at 1.8 watts per tube is 7.2 watts into a 102db efficient speaker. Not too crazy. ;)
Jamie
Big speakers and little amps blew my mind!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: 32 Ohm Drivers // 32 Ohm OPTs - Mr_Steady 14:43:06 11/28/14 (12)
- RE: 32 Ohm Drivers // 32 Ohm OPTs - maxhifi 16:01:44 11/28/14 (11)
- I believe Mr_Steady could be trying to mislead you. - kyle 18:52:55 11/28/14 (8)
- RE: I believe Mr_Steady could be trying to mislead you. - Mr_Steady 03:57:36 11/29/14 (7)
- RE: I believe Mr_Steady could be trying to mislead you. - kyle 05:51:07 11/29/14 (6)
- RE: I believe Mr_Steady could be trying to mislead you. - Triode_Kingdom 13:06:00 11/29/14 (1)
- RE: I believe Mr_Steady could be trying to mislead you. - Mr_Steady 05:49:18 11/30/14 (0)
- A Simple Audiophile Question - Mr_Steady 07:41:01 11/29/14 (0)
- RE: I believe Mr_Steady could be trying to mislead you. - Mr_Steady 07:16:17 11/29/14 (0)
- RE: I believe Mr_Steady could be trying to mislead you. - Mr_Steady 07:03:59 11/29/14 (0)
- RE: I believe Mr_Steady could be trying to mislead you. - Mr_Steady 07:02:11 11/29/14 (0)
- RE: 32 Ohm Drivers // 32 Ohm OPTs - Mr_Steady 16:44:06 11/28/14 (0)
- RE: 32 Ohm Drivers // 32 Ohm OPTs - Mr_Steady 16:33:02 11/28/14 (0)