RE: ELROG 300B

SET Asylum

Single Ended Triodes (SETs), the ultimate tube lovers dream.

Follow Ups Full Thread

Topic - EML 300B - greg7 03:26:32 10/06/14 (27)

I have heard most of the 300B tubes - Plinius_Fan 03:23:41 10/11/14 (5)

RE: I have heard most of the 300B tubes - charles1dad 18:11:17 10/11/14 (4)

I hope it was the Sophia Princess Mesh plate - Plinius_Fan 23:24:57 10/13/14 (1)

RE: I hope it was the Sophia Princess Mesh plate - charles1dad 08:36:40 10/14/14 (0)

ditto - Enzo 13:58:54 10/12/14 (0)

My experience mirrors yours (nt) - Jon L 19:44:00 10/11/14 (0)

RE: EML 300B - lokie 11:00:22 10/10/14 (0)

RE: EML 300B - kyle 18:57:47 10/09/14 (0)

ELROG 300B - mwiebe 16:14:43 10/09/14 (8)

RE: ELROG 300B - JoshK 06:07:23 10/17/14 (2)

RE: ELROG 300B - drlowmu 18:00:41 10/19/14 (1)

RE: ELROG 300B - JoshK 13:32:32 10/20/14 (0)

RE: ELROG 300B - drlowmu 22:35:26 10/09/14 (4)

I just ordered a pair of these ER-300B's - Nickel Core 10:01:18 10/18/14 (3)

RE: I just ordered a pair of these ER-300B's - drlowmu 18:04:06 10/19/14 (2)

I know what you thoughts are about 300B's but... - Nickel Core 05:27:30 10/20/14 (1)

RE: I know what you thoughts are about 300B's but... - drlowmu 14:42:22 10/20/14 (0)

RE: EML 300B - hifipaul 17:54:04 10/06/14 (0)

RE: EML 300B - Frihed89 13:56:41 10/06/14 (0)

RE: EML 300B - h00hbt 11:28:55 10/06/14 (0)

I'd agree that the EML 2A3 is worth the effort ot obtain... - Ivan303 08:27:24 10/06/14 (6)

RE: I'd agree that the EML 2A3 is worth the effort ot obtain... - greg7 08:47:29 10/06/14 (5)

Hard to say as at that time I only had the WE's to test.... - Ivan303 13:24:33 10/06/14 (4)

RE: Hard to say as at that time I only had the WE's to test.... - charles1dad 18:05:14 10/06/14 (3)

RE: Hard to say as at that time I only had the WE's to test.... - SETdude 16:01:23 10/08/14 (0)

I agree on the Takatsukis' - Des 22:58:19 10/06/14 (1)

Nice!... - onemug 07:18:00 10/07/14 (0)

Follow Ups

RE: ELROG 300B - drlowmu 18:00:41 10/19/14 (1)

RE: ELROG 300B - JoshK 13:32:32 10/20/14 (0)

Post a Message!