In Reply to: EML vs. Sophia Meshplate 2A3 posted by greg7 on July 12, 2012 at 12:55:44:
Those are not Mesh-Plate tubes. Mesh is interwoven. Those are" Tin-Can" plates with holes punched into them.
W.E. made some tubes this way, so did Mullard, etc. All of these did the same thing-- distort.
TRUE MESH (interwoven strands) catches electrons very well-- ON THE FIRST TRY-- electrons don't bounce back from the interweaves. This is expensive-- and necessary-- to build..
Solid-Plate tubes reflect SOME of the energy, creating time-delayed signals that are ADDED ONTO the signal.
Solid-plates, with holes drilled or punched thru them are sales gimmicks-- and nothing else of value.
These cool better because of the ventilation thru the holes, allowing puffed-up specs. . They also cause some electrons to try to go thru the holes. This happens in what may best be called random-mess-making. Kind of like letting a Child-Care Center go for 5 hours with no adults present. Random Train Wrecks.
In a Push-Pull amp, or in a S.E. that is built according to old-time Push-Pull rules, you may not hear all the train wrecks occurring. Push-Pull amps will also cancel-out quite a bit of these distortions, S.E. amps will not.
People always look for CHEAP-- but the truth is-- tubes like this are very expensive compared to what they actually are-- almost worthless sonically if used in musically transparent equipment..
On the other hand, EML tubes are actually worth all that they cost-- maybe more.
---Dennis---
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: EML vs. Sophia Meshplate 2A3 - tube wrangler 18:25:40 07/12/12 (16)
- RE: EML vs. Sophia Meshplate 2A3 - Frihed89 11:04:45 07/18/12 (15)
- RE: EML vs. Sophia Meshplate 2A3 - wolfbane 16:39:26 07/19/12 (0)
- RE: EML vs. Sophia Meshplate 2A3 - tube wrangler 19:39:10 07/18/12 (13)
- So, the EML solid plates are inferior to JJ? - RC Daniel 02:33:32 07/21/12 (8)
- RE: So, the EML solid plates are inferior to JJ? - tube wrangler 13:02:53 07/21/12 (7)
- Dennis, thanks for the clarification. - RC Daniel 14:27:55 07/21/12 (6)
- RE: Dennis, thanks for the clarification. - tube wrangler 21:10:10 07/21/12 (1)
- RE: Dennis, thanks for the clarification. - RC Daniel 23:28:43 07/21/12 (0)
- RE: Dennis, thanks for the clarification. - drlowmu 21:09:47 07/21/12 (3)
- RE: Dennis, thanks for the clarification. - RC Daniel 23:13:47 07/21/12 (2)
- RE: Dennis, thanks for the clarification. - Cleantimestream 02:34:23 07/24/12 (1)
- RE: Dennis, thanks for the clarification. - RC Daniel 13:29:16 07/24/12 (0)
- RE: EML vs. Sophia Meshplate 2A3 - Paul Joppa 08:46:45 07/19/12 (3)
- RE: EML vs. Sophia Meshplate 2A3 - tube wrangler 14:56:38 07/19/12 (2)
- RE: EML vs. Sophia Meshplate 2A3 - Paul Joppa 17:45:55 07/19/12 (1)
- RE: EML vs. Sophia Meshplate 2A3 - tube wrangler 19:07:05 07/19/12 (0)