Power Forum

RE: Calling Paul

67.104.10.162

In Reply to: RE: Calling Paul posted by Leslie Loh on February 13, 2008 at 06:42:05

I am surprised Atven doesn't know how to do this, probably our fault for not communicating with him as well as we should. The reason it is not in the manual is the voltage adjustment was never designed to be something the user did. The old Power Plants had the ability to adjust the voltage from the front panel, the PPP does not.

The PPP output voltage can be set, and here is how to do it. Put the front panel metering system to read the output voltage. Then look underneath the PPP, close to the front panel. You will see either a screwdriver adjustment trimpot (inside a hole) or a small finger turn adjustment (depending on which vintage unit you have). Turn this control until the front panel meter shows 240.

If you have a problem, contact us via email directly.

Follow Ups:

RE: Calling Paul - Leslie Loh 07:38:56 02/13/08 (4)
- RE: Calling Paul - PaulMC 07:51:08 02/13/08 (3)
  - RE: Calling Paul - Leslie Loh 08:03:18 02/13/08 (2)
    - RE: Calling Paul - PaulMC 09:25:27 02/13/08 (0)
    - RE: Calling Paul - Leslie Loh 08:48:33 02/13/08 (0)

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.