In Reply to: Re: Recommendation for Power Conditioner/Surge Protector posted by Bill Fitzmaurice on August 7, 2006 at 17:21:06:
I suggest you look at the input waveform on a scope and the output
waveform from an isolation transformer
The windings are 1:1
Not only does it totally block any DC on the waveform it also
totally eliminates ground loop hum
In other words if you look at a noisey AC waveform going into
an isolation transformer you will see a clean sine wave on the outputUsing Capacitance and surge suppression after the transformer
will give you clean ACThe medical field and the military must have a clue on proper AC
conditioning because they use them for AC conditioningMy whole point in this is using a freegan computer power strip
with chokes and MOV's is not thourough AC conditioning
:)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Recommendation for Power Conditioner/Surge Protector - STUART 06:41:55 08/08/06 (6)
- Re: Recommendation for Power Conditioner/Surge Protector - Bob Lee (QSC) 08:43:10 08/08/06 (5)
- Re: Recommendation for Power Conditioner/Surge Protector - STUART 09:28:30 08/08/06 (3)
- Re: Recommendation for Power Conditioner/Surge Protector - Bill Fitzmaurice 05:47:24 08/09/06 (2)
- Re: Recommendation for Power Conditioner/Surge Protector - STUART 13:50:12 08/09/06 (1)
- Re: Recommendation for Power Conditioner/Surge Protector - Bob Lee (QSC) 09:43:51 08/17/06 (0)
- Re: Recommendation for Power Conditioner/Surge Protector - Bill Fitzmaurice 09:22:46 08/08/06 (0)