In Reply to: ? 4 Bill about recent AX horn monitor article posted by Sean on August 28, 2005 at 11:28:08:
The chart is with the Eminence driver. I've had reports that the Dayton 6 PA driver works well in it. I don't know what it will deliver, ask Leland at my forum, he's got four of them. I chose 100 Hz to get maximum output where you need it for vocals, going to 80 isn't of much worth, if you need to go lower for bass instruments you need to go to 60, which I did with the ten loaded Wedgehorn 10. There are no impedance issues with only 4 piezos parallel wired, but you can go series/parallel to pad them by 6dB if they're too hot for your taste. The Eminence I recommend for pro rentals where overpowering/abuse can be expected. Pyle has taken on the distribution of the CTS piezos, so you can still get them.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: ? 4 Bill about recent AX horn monitor article - Bill Fitzmaurice 15:31:12 08/28/05 (3)
- Re: ? 4 Bill about recent AX horn monitor article - Sean 19:18:11 08/28/05 (2)
- Re: ? 4 Bill about recent AX horn monitor article - Bill Fitzmaurice 05:11:18 08/29/05 (1)
- 80 Hz F3 bass cabinets... - Sean 17:04:41 08/29/05 (0)