In Reply to: Crown CE2000 repair posted by Thermionic27609 on February 13, 2010 at 17:34:59:
This should be really not a huge deal to repair without a schematic
Typically the output transistors are the culprit..
The other benefit here is you probably have one working channel and one
not...therefore you can compare voltages and find the issue on the bad channel.
You can inject a signal and look at it with a scope
Take the plunge
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Crown CE2000 repair - Pro Sound Guy 13:24:21 02/15/10 (0)