In Reply to: RE: You may be posted by fmak on June 9, 2016 at 07:07:16:
Thanks a lot again for the helpful advice.Usually i see in the specifications noise figures given up to 100 kHz.
I wonder what kind of issues noise located above 100kHz (i.e. in the MHz region) can cause.
Some clock irregularity/instability maybe ?
with my current set-up i can only check the noise floor up to 48kHz (using 96k sampling rate)I looked at the usual regulator chips and as you said before they are quite uneffective at suppressing higher Hz noise.
There are some a little better but kits using them are very rare.
I will look for the brands you mention.
In the meantime have found the Belleson site.
Thanks a lot again.
Kind regards,
bg
Edits: 06/09/16 06/10/16 06/10/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: You may be - beppe61 22:31:56 06/09/16 (0)