In Reply to: Implemented fiber optic... posted by DTB300 on August 24, 2015 at 06:45:33:
I took the SMPS off the media converters and used an Anker external battery (5V/4.5A max). Dang, sure enough, the sound improved (slightly) some more.
What most people don't realize is those USB power packs do not provide 'clean' 5V DC battery output. They are basically a form of noisy switching power supply.
The Anker and pretty much all of them use an inductor and switching boost converter chip inside to covert the 3.7v nominal from Li batteries to +5VDC.
In other words, it's a 'switching power supply' and the +5VDC out is far from 'clean'. The output 'noise' from such devices can be quite high compared to even a wall wart AC power module.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Implemented fiber optic... - AbeCollins 08:00:57 08/24/15 (7)
- RE: Implemented fiber optic... - DTB300 06:18:20 09/15/15 (0)
- RE: Implemented fiber optic... - cfraser 14:52:30 08/24/15 (0)
- RE: Implemented fiber optic... - DTB300 08:15:40 08/24/15 (4)
- RE: Implemented fiber optic... - AbeCollins 08:24:52 08/24/15 (3)
- RE: Implemented fiber optic... - Bob_C 14:13:42 08/24/15 (2)
- RE: Implemented fiber optic... - AbeCollins 17:34:19 08/24/15 (0)
- RE: Implemented fiber optic... - DTB300 14:46:03 08/24/15 (0)